Sky TV Remote Control

dedaw

My sky remote no longer controls my samsung tv. It will only work on the digibox. Any ideas how to reinstall it with the tv???

Radharc na Sleibhte

Go to the sky interactive help on your box, I think it tells you there.

dedaw

No Luck in sky interactive, unless I can't find it

VERYinterested

There's a section called 'Programming your remote' in Interactive, and it gives a fairly comprehensive list of all makes of tv's and the codes that will make your remote work your tv. Your batteries must have gone low or disconnected for a time, maybe it fell or something like that and dislodged the batteries.

LarWright

1) Switch on the TV set

2) Press the TV button on the Sky Remote

3) Hold down the select and red buttons for 2-3 seconds until the LED blinks twice

4) Press the TV button on the Sky Remote again

5) Enter the 4 digit code for your make of TV (SAMSUNG IS 0060)

6) The LED should blink twice, if not recheck the 4 digit code used and go back to 1

7) Press the standby button on the Sky Remote (The TV should go to standby)

8) Press select to store this setting

davrac

Hi, I have a Prestigio 42" HD TV, and I cant locate the Code for the SKY+ HD Remote.

I have tried all the Philips codes, as someone said that prestigio was made by philips,but no luck.

I have also tried the Sky Interactive, Sky Active section but the tv is not listed.

Can anyone help.

Cheers
Davrac

byte

davrac wrote: »

Hi, I have a Prestigio 42" HD TV, and I cant locate the Code for the SKY+ HD Remote.

I have tried all the Philips codes, as someone said that prestigio was made by philips,but no luck.

I have also tried the Sky Interactive, Sky Active section but the tv is not listed.

Can anyone help.

Cheers
Davrac

Hm, that TV has various different brands attached to it. It looks identical to the Nordmende sets distributed in Ireland. Also looks somewhat similar to DMTech and Wharfedale, so try those.

Failing that... Beko, Alba, etc.

davrac

Nice one, ill give that a try, and i get it working I will post the results.

Cheers
davrac

davrac

1. Press the TV button.
2. Press and hold the red button and the Select key at the same time untill the red light flashes twice.
3. Enter the 4 digit code for your samsung TV (it should be in the back of your sky box manual) if it is a valid code the red light should flash trice.
4. Press the TV button on the sky remote.
5. Now try changing the volume or turning off the TV.

If the code does not work then complete steps 1-5 again using a different code in step 3.

google samsung Sky tv codes, you should find allot of pages sharing that info.

best of Luck
Davrac

davrac

Hi. I got it its 0236 and that works with my SKY+ HD Box.

Prestigio 42" LCD HD TV. Sky + HD remote code is 0236.

davrac

it 0236, if used the Akia codes.

kbell

Op, Press (tv) then (select) and (red) together, the led should blink twice.
Enter 646, the led should blink twice.
(Select) to confirm.

Should work if your remote is rev. 6 or higher (remove battery cover to check) although I've gotten it to work with older models too.