Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

setting post & rail in concrete

  • 02-12-2008 12:28am
    #1
    kerrysgold
    Closed Accounts Posts: 969 ✭✭✭


    Does anyone know how I could go about hiring a thing for making a hole in gravel to put a post down into so concrete can be poured in after it to set it there? (for post & rail fencing) Last guy that did some fencing for us used a thing that sort of resembled a giant corkscrew to make a hole in the ground, have no idea what they are called though. Thanks. :)


Comments

  • #2
    CJhaughey
    Registered Users, Registered Users 2 Posts: 14,907 ✭✭✭✭CJhaughey


    A hole borer/Augur is what you are looking for, they come in petrol flavour and sweat flavour.:D
    Petrol powered augurs can drill fairly large diameter holes but you need to be careful if the bit sticks and throws you.
    Manual (sweat) versions exist as well but are slow and tedious and hence uncommon.
    Try a hire shop


  • #3
    ART6
    Registered Users, Registered Users 2 Posts: 2,632 ✭✭✭ART6


    CJhaughey wrote: »
    A hole borer/Augur is what you are looking for, they come in petrol flavour and sweat flavour.:D
    Petrol powered augurs can drill fairly large diameter holes but you need to be careful if the bit sticks and throws you.
    Manual (sweat) versions exist as well but are slow and tedious and hence uncommon.
    Try a hire shop

    That's the way to do it, petrol one every time, but use heavy work gloves when using it unless you want some really classy blisters!


  • #4
    CJhaughey
    Registered Users, Registered Users 2 Posts: 14,907 ✭✭✭✭CJhaughey


    Just thinking about this, you know that you can get steel footings for 4 x 4 posts don't you? They have a steel box section that the post fits into and there is a long spike that tapers that is pushed into the concrete.
    This allows you to drill the hole smaller and the wood won't rot being stuck in cement and wet all the time.


  • #5
    charlesD
    Closed Accounts Posts: 194 ✭✭charlesD


    The gas powered auger is the way to go. It can literally save you hours of time. They have a few different types you can rent.

    For post holes a single person one will work, but if you have someone helping you, you might consider using a two person auger, because they work a lot better.

    You will still probably have to do some digging and if it does not want to go down don't force it. My old landlord and I were using an auger that was attached to a tractor and it got stuck. Rather than pull it out, we kept on going and ended up bending the augur.


Advertisement