[WANTED] M4 Body

chalky

I'm looking for an M4 body for a project, can be metal or abs, as long as I can mount a free floating RAS on it

Masada

you'll need a metal body for that dave., the plastic ones cant take the delta ring you need.,
I have a metal lower reciever if ya want it, no upper reciever though.,

weeder

ive got a plastic one here in a box, its jg
TM folding type reciever,upgraded my JG with a metal dboys reciever from ebaybanned and the only incompatible part was the hopup which ill also include
20 euro

chalky

I think thats true with the Dboys, but my JG M4 I think should hold it, except, as weeder says the hopup unit.

Coincidentaly enough, the RAS that I have is attached to (most of) a metal upper receiver, so I'll thake that off you richie.

If that doesn't work out then I'll take the JG receiver off you weeder.

Thanks

Masada

ive a plastic one aswell dave, just didnt offer that coz they use a different outer barrel,.
i also have the metal upper reciever but the tabs are broken on the rear of it, its still usable but theres a gap of a couple of mm above the rear body pin.,

weeder

OT but thats not entirely true, not all plastic recievers cant take the metal outer barrel, Jg plastic works with metal dboys

Masada

but theres too much flex on the delta ring threads and its almost gaurenteed to break right there., i wouldn't do it with anything other than a metal reciever.,

oh and of course, the parts are free.,:)

chalky

I can drop into the shop and pick it up either tomorrow morning or wednesday if thats ok.

Masada

no probs man,.:)