JG G36C BB Chamber Problem

Goldensun2120

First off, thank you to those who help or try and help me with my problem.

Heres the problem...

My BB's arent getting into the chamber of my JG G36C because of some black piece in the way... I opened it up a small bit to see what it was and it was part of the barrel I believe, and the hop up was right next to it.

Now I found a fix but then I have to use Glue... Basically what I do is use an allen wrench and take out the metal piece, then push the part that the mag goes in towards the stock... but then I can not put the black piece back in(for lack of what to call the black piece)

Heres a picture...
The Blue area is the black piece that I use allen wrench to get out
Red Area is the part where mag goes into and I have to push towards stock



http://img73.imageshack.us/my.php?image=lolpt6.png

The picture doesnt seem to show up for me

Sami J

HMMMM It appears to me that the bullpup allignment is off try to move or force the part with a metal rod or something if that doesnt work reply.
_Sammy J_

Goldensun2120

Doesnt seem to be working sammy would you like me to take an actual picture so u could see the problemo?

Tys for trying btw

Sami J

it could also be the gearbox has slid up when u were skirmishing you could have banged it agenst the ground or something? try to move that back
if you want to take a picture you can
I also herd that this gun is very reliable if you cannot fix your g36c and you would like a replacement gun
http://www.airsoftgi.com/product_info.php?cPath=139_24_163&products_id=1976

_Sami J_

Goldensun2120

Wow this is crazy cause I already had the link open!!

When I bought my g36c I had to decide between that and the mp5...

Im thinking the gearbox slid towards the stock to but it wont budge im not sure how to get it back into position.