KWA Glock 19 Problem

Podge2k7

I received my glock 19 today!
http://www.mainirishairsoft.com/scripts/prodView.asp?idproduct=209

i filled the mag with gas and bb's,cocked it but it wont shoot!maybe its the safety but i dont no what way it works on that gun!!
Please tell me what the problem is!!


Thanks

Witcher

Podge2k7 wrote: »

I received my glock 19 today!
http://www.mainirishairsoft.com/scripts/prodView.asp?idproduct=209

i filled the mag with gas and bb's,cocked it but it wont shoot!maybe its the safety but i dont no what way it works on that gun!!
Please tell me what the problem is!!


Thanks

Glocks dont have an external safety so you can rule that out.

Stupid question but are you sure its gassed, did ya hold the mag upside down

when filling etc?

Podge2k7

Yeah let the gas out to see was their any in it and after putting more in it!!Is there a safety on the trigger or something??

Podge2k7

The gun takes up the bb when i cock it but it wont fire it??

Witcher

Podge2k7 wrote: »

Yeah let the gas out to see was their any in it and after putting more in it!!Is there a safety on the trigger or something??

yeah thats the way the real glock is designed, the safety is disengaged when

you place your finger on the trigger

Try this and if it doesn't work, its possibly a mechanical fault

1. Put magazine in

2. Pull slide

3. Pull trigger

Thats basically the checklist of making a glock fire, so if it doesnt work after

that ya have other problems

Witcher

Podge2k7 wrote: »

The gun takes up the bb when i cock it but it wont fire it??

Sounds like an internal problem

Podge2k7

What could be wrong??

Witcher

Podge2k7 wrote: »

What could be wrong??

I dont know tbh, but I'd hazard a guess at a problem with the piece in the gun that hits the

mag valve, seems like the gas isn't being released, do ya know how to stip it?

Podge2k7

TBH i dont have a clue how to do that!!Please explain!

Witcher

ok, this is just a quick strip,

1. Remove mag.

2. Lock slide back

3. Pull down the tabs just above the trigger, and release the slide

The slide should jump forward off the body.

Slide it off and look down into the magwell and pull the trigger, ya should see

a little piece pop forward from the back of the magwell. This is the piece that

would release the valve in the mag, If it doesnt pop out ya have a trigger mech problem.


To reassemble the gun, just slide the slide back onto the frame

Podge2k7

Yeah i did that and pulled the trigger and theres a bar type thing on the side that moves back!it stretches a little spring while doing so!

Podge2k7

Sorry after getting it working!!Thanks for your help!