WANTED: 1911 type pistol

Stercus Accidit

I sold mine awhile back, like a fool, and subsequently saw some of the custom work people have been doing to them, and really wanted one again.

It can be WE, KJW whatever, standard style or tactical, but not a hi-capa.

Thanks.

Stercus Accidit

Bump!

babyjames

Motosam I have the Ksc m1911a1 You helped me replace the leafspring in a while ago, only problem cant find a mag for it? If this is any use to you let me know and we can sort something out.

Best Rgds.

Stercus Accidit

Sorry they are made of plastic aren't they?
I forgot to mention that I needed a metal one, I was planning on doing a polish job on the metal and have a silver 1911, pulp fiction style, thanks for the offer though.

babyjames

No Motosam it is a full metal KSC one with trade marks. It needs some work I think. Not looking for cash but if you are inrested you might be able to put a trigger mech back together for me from a spring sniper. I have to learn that beer and trying to get familiar with the tech side of Airsoft pieces do not mix :eek:.

Rgds.

amaughan

babyjames wrote: »

No Motosam it is a full metal KSC one with trade marks. It needs some work I think. Not looking for cash but if you are inrested you might be able to put a trigger mech back together for me from a spring sniper. I have to learn that beer and trying to get familiar with the tech side of Airsoft pieces do not mix :eek:.

Rgds.

haha

Stercus Accidit

If you are going to be in dublin some time, sure, otherwise I cant help.

What type of rifle is it there may be a guide online how to repair it, if its a bar10 or vsr, "bar10 review" when googled has a guide on the trigger mech.

babyjames

Hope ye get a sour pint ye bolloc*s. there ye go beer again:D

amaughan wrote: »

haha

babyjames

No guide to be found Motosam it is an ASG Steyr SSG 69 P2 got it of MainIrish have asked them for a replacement but no luck so far have spent a lot of time painting and adding pieces to it. Just tought one night (I'LL FIND OUT HOW IT WORKS:rolleyes:) . If you think you can reassemble well and good . I can get the 1911 to you no probs ,As you you have helped me out of the sh*te a few times:D you are welcome to it . It cost 150 or so yo yo's to buy but I' m not goig to do anything with it due to lack of knowledge and time but I would like my rifle to work .Drop me a line or a PM.

Rgds.

What type of rifle is it there may be a guide online how to repair it, if its a bar10 or vsr, "bar10 review" when googled has a guide on the trigger mech.[/quote]

Stercus Accidit

http://www.airsoftretreat.com/reviews/showproduct.php?product=220&cat=62

Theres a review of the bar 10, including some info on the trigger mechanism, who knows it may be similar to your rifle.

RE: 1911, I'll pm you now regarding postage or collection etc.

elsi

Motosam wrote: »

http://www.airsoftretreat.com/reviews/showproduct.php?product=220&cat=62

Theres a review of the bar 10, including some info on the trigger mechanism, who knows it may be similar to your rifle.

RE: 1911, I'll pm you now regarding postage or collection etc.

I think babyjames wants his rifle fixed in exchange for the pistol.

Where abouts in Kilkenny are you? Im from Wexford and I may be able to help for the pistol as I am familiar with this particular rifle.

babyjames

Between Callan and Carrick on Suir but work in waterford.

Rgds.

elsi wrote: »

I think babyjames wants his rifle fixed in exchange for the pistol.

Where abouts in Kilkenny are you? Im from Wexford and I may be able to help for the pistol as I am familiar with this particular rifle.

elsi

Will you be in waterford on saturday do you know?

Either way if im not working sat I could call out to ya and collect the rifle for repair. Do you have all the parts for it?

babyjames

Not sure if I am working Saturday yet . I had all the parts until I had a look at it again and lost a little spring when it decided to head west at high speed!!!!!!!!!!!.

elsi wrote: »

Will you be in waterford on saturday do you know?

Either way if im not working sat I could call out to ya and collect the rifle for repair. Do you have all the parts for it?

Stercus Accidit

Any 1911's out there?

babyjames

Hi Motosam I still have the KSC if you are still intrested. Got sorted with a trigger mech for the sniper (No more messing around with my gear when drunk :eek:)so I 'amfixed up that way. If your intrested say 40 yo yo's plus postage. Or if you have a spare mag for a KSC Glock G18C.
Bear in mind the mag for the 1911 is kaput

Stercus Accidit

Interested in a swap?

I have a bell m10 I couldn't be bothered advertising for sale, gas revolver with shells and hard case.

If not 40 sounds grand.

Busta Hyman

i might be interested in the bell how much you after

Stercus Accidit

probably 40-50 bob, but I'm not certain Id sell it yet, as above, I'll trade it for something new.

If babyjames doesn't want it, I may put it up for sale.

babyjames

Hi Motosam revolvers are not my kinda thing PM me your shipping address I will wrap up the 1911 and post it up ,and let you know what the shipping cost is just add it to the forty yo yo's and send me down a money order or cash. Rember the mag is kaput and I have no way of knowing if I but the leaf spring back in correctly so sold as is.

Motosam wrote: »

Interested in a swap?

I have a bell m10 I couldn't be bothered advertising for sale, gas revolver with shells and hard case.

If not 40 sounds grand.

Stercus Accidit

Ok, due to some confusion I can't take the previously offered pistol and I am back in the market for a 1911 gbb in full metal. We, bell and all variants of are considered, thats long and short 1911's by WE, 1911 by bell, or any full metal 1911's.

Full metal is most important, as the whole pistol is going to be polished.

Thanks.

Tommyboy71

The Bell 1911's are cheap enough in Eirsoft. At least you know you are starting with a good quality, fully functioning, full metal GBB.

flashinbluelite

Stercus Accidit wrote: »

Ok, due to some confusion I can't take the previously offered pistol and I am back in the market for a 1911 gbb in full metal. We, bell and all variants of are considered, thats long and short 1911's by WE, 1911 by bell, or any full metal 1911's.

Full metal is most important, as the whole pistol is going to be polished.

Thanks.

hey i have this http://www.mainirishairsoft.com/scripts/prodView.asp?idproduct=397 your for 100euro? few scratches,but your painting it?!

Stercus Accidit

flashinbluelite wrote: »

hey i have this http://www.mainirishairsoft.com/scripts/prodView.asp?idproduct=397 your for 100euro? few scratches,but your painting it?!

Does it come with one or two mags?

Bar the externals, is it in good condition, no deep gouges in th emetal for example, or serious knocks. Functionally it has to be perfect also.

G3-Nut

I have the following:

http://www.eirsoft.ie/store/product_info.php?cPath=33&products_id=204

Brand new, never been skirmished, havent even used up the 1st can of green gas i got with it:rolleyes: Fully trademarked, all metal, hop up...

Comes with carry case(case has half of the sticker left on it after my attempt at taking it off lolz), hop-up adjusting tool, adn some other thing i dont know that its for but i have it lolz...

going for 90 quid...

reason for sale- need mula for new vest

Stercus Accidit

G3-Nut wrote: »

I have the following:

http://www.eirsoft.ie/store/product_info.php?cPath=33&products_id=204

Brand new, never been skirmished, havent even used up the 1st can of green gas i got with it:rolleyes: Fully trademarked, all metal, hop up...

Comes with carry case(case has half of the sticker left on it after my attempt at taking it off lolz), hop-up adjusting tool, adn some other thing i dont know that its for but i have it lolz...

going for 90 quid...

reason for sale- need mula for new vest

I'll offer you 75. This is with one mag yes? And confirming it is full metal?

tonky

Was going to offer - but - site says abs slide & body ? Story ?

Stercus Accidit

tonky wrote: »

Was going to offer - but - site says abs slide & body ? Story ?

Get your own thread

tonky

my bad

Prisoner6409

Just bought this the other day, http://www.mainirishairsoft.com/scripts/prodView.asp?idproduct=206, a really nice 1911 and they have them in stock at the mo for 109 yoyo's new. Guys in the store were really helpfull as per usual.

Stercus Accidit

Thanks, still hoping to get a second hand one.

I sold mine before so am avoiding losing more money on a new one, as it is going to be modded anyway.

G3-Nut

Stercus Accidit wrote: »

I'll offer you 75. This is with one mag yes? And confirming it is full metal?

Well, its 100 new and i can sell it to me mate paul here for 85 man so im looking 90 with P+P..cant go lower or i make a loss:rolleyes: sorry man

Yes one mag all metal build

Stercus Accidit

G3-Nut wrote: »

Well, its 100 new and i can sell it to me mate paul here for 85 man so im looking 90 with P+P..cant go lower or i make a loss:rolleyes: sorry man

Yes one mag all metal build

Sure go ahead, I may just import a new one, I was a fool to sell mine.

Thanks for the offer all the same.

G3-Nut

ok man no hasstle...thanks for the interest!!:D

mecka

mecka here have a we 1911 with 2 mags will sell for 90euros perfect condition