JG AUG A3/RAS Review

Masada

i had the opertunity to strip one of these down in tony's today for kev so I thought Id take sime pics of the new JG internals and do a little review of my opinions on it.,





This is a pic of the MOSFET in the battery compartment.




Theres 2 allen bolts in the top rail to remove the front end.




The barrel comes all the way to the edge of the flash hider. thats a pretty long barrel.

Masada

Then theres the impressive part, the internals in this piece are beautiful, very advanced stuff for a clone AEG.







Another pic of the Mosfet with a mini flat blade car type fuse installed.




Heres the gearbox in 2 parts, its a reinforced version of the usuall V3 AUG gearbox JG fit in the A1 and A2.
It uses the standard plastic spring guide as in the photo, although be aware if fitting a bearing one in this you would require a lower spring since its sitting on the 325fps mark at the moment.


7mm bearing bushings fitted in it as standard.


but not just that, theres also bearing shaft gears too. (notice the bevel gear axel)



The piston is the regular one JG use in most of their AEGs, nothing fancy but ive only ever seen one damaged one to date.



Over all its a really impressive AEG and its a real step forward for the chinese clones, i ran it on a 9.6 that needed charging and was still impressed with the ROF, it has the same trigger assembly as the usuall AUGs with the trigger combining the fire select too, the initial sqeeze gives you single shot and pressing the trigger in more gives fully automatic.
i didnt give it a good test before upgrading the hopup to the gaurder silicone but the original one is just a regular rubber like almost all other AEGs. id say the combination of the silicone hopup and the length of the barrel in this baby is gonna make a pretty accurate rifle but i havnt tested it at any decent range though, i'll leave that up to kev.,
I think they retail at about 170 notes and for that kinda sposh you dont have to touch anything inside it really, its better than some highend guns ive worked on.,

enjoy.,

dingo585

Do you know anyone with one of these aegs for sale. will pay good price for one in good condition