Anyone use a Belkin F5D8631 on Eircom?

Redshift

As the title says does anyone have one of these working on eircom DSL
I've tried to get it working several times, I have copied the the settings exactly from my eircom supplied netopia 2247 but despite syncing up no problem I get a "Login Failed" when it tries to authenticate and so a WAN IP is not obtained.
The funny thing is if I default and reprogram it will connect the first time but if it is power cycled or disconnected from the line it will not reconnect.

As I mentioned it syncs up fine but it cant seem to login.
I'm using eircom@eircom.net as the user and eircom as the password

I want to use this as the eircom modem is crap

Max Allowed Speed 3072 / 384
SN Margin 12.5 / 21.00
Line Attenuation 32.00 / 17.50
CRC Errors 254 / 3


The belkin gets an SNR of 27 with the same attenuation and I just know that the netopia is probably not going to be able for the speed increases.

Any Ideas Folks:)

mickzer

All the settings are on this page:
http://broadbandsupport.eircom.net/SRVS/CGI-BIN/WEBCGI.EXE/&/?St=9&E=0000000000127876527&K=7590&SXI=4&E=0000000000127876527&St=9&K=7590&SXI=4&t=startup&branch=4#settingsSide
Seems the Username=eircom
Password=broadband1

mickzer.

Redshift

No Dice. tried them before anyway. Not to worry I brought it back and changed it for a Dlink which connected first time with same settings as the belkin had:)

Rate (Kbps): 3072 / 384
SNR Margin (db): 26.5 / 20.00
Line Attenuation (db): 32.00 / 17.0

Big improvement in the SNR

Cheers for the Reply

mickzer

Big improvement...:D
Which Dlink did you get?

mickzer.

Redshift

Got this one.