RF output from Sky+box

Stugots

Hi,
I just got Sky+ and I'm lovin' it

I'd like to be able to watch whatever is showing on the Sky+ box in another room. I don't need to be able to change channels as per the Sky Link facility, so I presume I should be able to just run coax to the other TV. I have done this already and tried it out. I get a perfect picture, but no sound. Is there something I need to enable in the menus to get sound? I tried both RF Out 1 and 2.

Thanks in advance for anyt help.
Stu.

crubean

try the output channell on the sky box.just try tunning the other tv again.
I think ch79.if you know what i mean

byte

I think it may be a problem with tuning on your second TV. You may need to change the audio parameters in manual tune mode. Usually you'd have options like D/K, I, BG, etc. You need it set on I for sound here. Worth a check anyway

Sam Radford

I agree with Byte. You are using a multistandard TV set for use in Europe. Change the setting to PAL-I.

The other possibility is that you have a Digibox with a very rare PAL-G conversion by Kesh Electrics fitted. (www.pacelink.co.uk )

Or water has got down the aerial coax and corroded away the audio connection inside (very rare indeed!)

slave1

presume you have RF out powered?
services 0 1 select IIFC

watty

It's not the tuning or the power as there is picture.

It is either a faulty modulator or TV is not set to PAL I

Also try Digibox setup menu, audio level, see if changing that makes the audio come.