D-Boys m4a1 for sale

Stercus Accidit

This is a D-boys m4-a1 full metal.

Its been well maintained and has only minor external wear, and some mud

Internally its been well looked after, and has only been skirmished a couple of times, I use ak's now.
The spring was recently replaced and it chronos at 300 average.
The inner barrel has also been shortened to allow the outer barrel extension to be screwed off, the extension is included so if you get a longer tightbore barrel, you can have a cqb gun or outdoor gun.

It comes with two hi-caps, one barely used, both work perfectly.
Also a 3 point sling, 8.4v battery and I can get a clone charger, but don't have one at the moment.

New this would cost 155 from eirsoft inc. the extra mag, I'm selling for 100 as its old, and the dust cover doesn't click open anymore, it has to be done manually, as the little nub broke.

pics,

http://s240.photobucket.com/albums/ff232/motosam1/US%20gear/

Can be posted or collected in Trim Co.Meath.

For an extra 30€ I'll install a brand new set of bearing bushes and re-shim the gearbox.
The bushings were for an aeg I never got hense brand new, and systema shims.

kalkor

hey what length barrel is in it now, is it tight bore? is the battery nimh or nicad, thanks

Stercus Accidit

The barrel is just hidden by the outer barrel, it was cut to fit, so m4 cqb length.

So from 375 down to about 300, and its a 6.04mm barrel, which is considered a tightbore, its the stock barrel the aeg came with.

The battery is a 1100 mah nimh, used maximum ten times, I use a higher voltage battery for games.

Just an update the bearing bushes available are King arms, just checked my past orders on redwolf.

kalkor

very tempted, have you opened the gear box before? any chance you could get into balbriggan?

Stercus Accidit

Yes, recently changed the spring.

I don't see anything giving up in it anytime soon.

Balbriggan's a good bit out of the way for me, I can find out the postage cost if you want.

kalkor

yeah go for post costs.

kalkor

offer 80 excluding postage.

Stercus Accidit

Postage is 15€

offer declined.

(F.L.) Anders

Hi I'll i'll offer €110 to start including the installation of the new bushings and the reshim? I can pick it up in trim no bother?

Stercus Accidit

TBH I think 100 is fair, if I had asked more and then dropped to 100 I may have sold by now.

The gun is in great working order bar the little nub for the dust cover, which doesn't affect the guns operation.

I can do 120 altogether including bushings, shims etc.

(F.L.) Anders

€115?

Stercus Accidit

Add a fiver onto that :P

(F.L.) Anders

ah feck it I was really just being cheeky!:D
Go on €120!

Stercus Accidit

moved to pm to arrange pickup

nevo

is this gun simaler 2 the cqb version nd wat is the difference

Stercus Accidit wrote: »

This is a D-boys m4-a1 full metal.

Its been well maintained and has only minor external wear, and some mud

Internally its been well looked after, and has only been skirmished a couple of times, I use ak's now.
The spring was recently replaced and it chronos at 300 average.
The inner barrel has also been shortened to allow the outer barrel extension to be screwed off, the extension is included so if you get a longer tightbore barrel, you can have a cqb gun or outdoor gun.

It comes with two hi-caps, one barely used, both work perfectly.
Also a 3 point sling, 8.4v battery and I can get a clone charger, but don't have one at the moment.

New this would cost 155 from eirsoft inc. the extra mag, I'm selling for 100 as its old, and the dust cover doesn't click open anymore, it has to be done manually, as the little nub broke.

pics,

http://s240.photobucket.com/albums/ff232/motosam1/US%20gear/

Can be posted or collected in Trim Co.Meath.

For an extra 30€ I'll install a brand new set of bearing bushes and re-shim the gearbox.
The bushings were for an aeg I never got hense brand new, and systema shims.

Stercus Accidit

I sold this already