Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Please note that it is not permitted to have referral links posted in your signature. Keep these links contained in the appropriate forum. Thank you.

https://www.boards.ie/discussion/2055940817/signature-rules
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

broken primera screw-in roof antenna

  • 17-06-2008 9:13pm
    #1
    iplogger1
    Registered Users, Registered Users 2 Posts: 277 ✭✭


    The FM radio antenna for our car radio in a '99 Primera snapped
    (not sure if it was an act of vandalism...)

    The trouble is it was snapped in such a way that the stump left hasn't
    left any appreciable amount of material to grip with a pliers, etc so
    as to remove it from the receiving/screw in section.
    I could attach a photo but I think I've described it fairly graphically
    in any case ...

    How might I remove the remaining stump ? Is there a drill or some
    other implement which can be used in this case to salvage the
    remaining piece without messing up the screw threads on the roof
    mount assembly ?

    Is there some kind of bonding paste which could be used to (even
    temporarily) re-bond the aerial to the roof fixture in order just to
    allow a torque to be supplied to remove the piece left screwed
    in to the roof ?





    --ian


Comments

  • #2
    crosstownk
    Registered Users, Registered Users 2 Posts: 12,863 ✭✭✭✭crosstownk


    I'm sure there's plenty of DIY solutions, but the easiest has to be simply replace the base and the mast. Not the easiest, but if you can't get a decent purchase on the remnants of the mast and you've no access to a suitable stud extractor, then replace the lot. You'll have to pull down the roof cloth but that's not too difficult. An hour or two on the driveway at the weekend should see it sorted.
    Untitled Image




  • #3
    iplogger1
    Registered Users, Registered Users 2 Posts: 277 ✭✭iplogger1


    crosstownk wrote: »
    I'm sure there's plenty of DIY solutions, but the easiest has to be simply replace the base and the mast. Not the easiest, but if you can't get a decent purchase on the remnants of the mast and you've no access to a suitable stud extractor, then replace the lot. You'll have to pull down the roof cloth but that's not too difficult. An hour or two on the driveway at the weekend should see it sorted.
    Crosstwn - Many thanks for the prompt and very useful reply !
    I'd suspect that purchasing the lot and doing it DIY would be a lot
    cheaper than sending it to the dealer as I'd probably get fleeced with
    a heavy labour bill.

    thanks again!
    -Ian


Advertisement