Q6700+armor+wc

ricka05

Well after endless waiting for Q9450 , bought Q6700 with nice x10 multiplier...
Rest off the system :
Name..............: 4096MB-Kit OCZ PC2-8500 Reaper, CL5
Name..............: ABIT IX-38 QuadGT, Sockel 775 Intel X38, ATX
Name..............: Club3D 9800GTX, 512MB, NVIDIA Geforce 9800GTX,
Name..............: Intel Core 2 Q6700 boxed, 8192Kb, LGA775, 64bit,
Name..............: MS Windows Vista home premium 64bit Englisch

ricka05

WC gear :
SKU: THE-PA120-3
Product: ThermoChill PA120.3 Triple Radiator
SKU: SWT-MC14-VGA
Product: Swiftech MC14 VGA Ramsink Cooler (BGA)
SKU: YAT-D12SM-12
Product: Yate Loon 120x120x25 D12SM-12 1650rpm
SKU: SWT-MCP655
Product: Swiftech MCP655 Pump - Variable Speed Control
SKU: ZAL-MFC1-B
Product: Zalman ZM-MFC1 Plus Fan Controller - Black
SKU: SWT-SCOIL500CLEAR
Product: Swiftech SmartCoils Clear for 1/2" Hose
SKU: FES-UVB
Product: Feser One UV Black Coolant 1Lt
SKU: SWT-MCRESMICRO
Product: Swiftech MCRES Micro Reservoir
SKU: AQU-59008
Product: Masterkleer 7/16" Tubing
SKU: EK-B12
Product: 1/4" EK High Flow Barb for 1/2" Tubing
SKU: HIS-01JCS020-SIZE20
Product: Zinc Plated Worm Drive Hose Clip for 1/2" Tubing
SKU: AQU-45089
Product: DangerDen Silver Fill Port
SKU: SWT-MCW60
Product: Swiftech MCW60 Universal VGA Water Block with G80 Adapter
SKU: XSPC-EDGE
Product: XSPC Edge Acrylic CPU Waterblock
Selected options: Fittings: 1/2" Barb
SKU: ALC-14540
Product: Alphacool Installation brackets Black Ice Radiators - Black

ricka05

Originally was planing to go for D-Tek FuZion V2 CPU Block , but it seems its impossible to get it anywhere.....So after reading Martinm210 review bought
XSPC Edge Acrylic CPU Waterblock( it looks fantastic as well )
http://www.martinsliquidlab.com/XSPC-Edge-Acrylic-CPU-Preview.html

OK firs 24 h leek test :

CPU cooler


Couldn't fit 120.3 anywhere inside so had to make opening at the back off the case to let tubes go in :

I guess I wont be able to sell it anymore:(

XSPC base finish is nearly perfect :



long story short -

ricka05

Performance

<

temperature is after running prime 95 for 9 hours...


One thing is worrying me- at stock speed cpu idles at 26-26-30-33 , I mean its 7 degrees difference...but under load difference is only 3-4

Cpu is mounted using EK backplate , no springs , arctic silver paste(Yate Loon 1650rpm -at low , pump on speed 3 ) . Will try to remount block over the weekend , and put some Arctic Silver Ceramique.


At 3550Mhz , Vcore 1.35 I can pass 1H OCCT test , but temperatures are hiting 58 ....Pls share your wisdom

L31mr0d

for the leak test did you measure up all the stuff inside the case first then take it out and test it? Wouldn't you be worried that moving it back into the case might loosen something?

ricka05

Well i use Worm Drive Hose Clips and metal barbs , so mostly i was worried about block , rad build quality....
And i ran another 12 h with all components siting in case....

Anti

is it just me, or is there a kink from the rad to the cpu ?

ricka05

Anti wrote: »

is it just me, or is there a kink from the rad to the cpu ?

No , these no kink , i its just an angel picture was taken........

ricka05

L31mr0d- you have 6700 in your sig , whats your temp with tuniq tover ?

PogMoThoin

Chip is ok to 75'c or so.

Tjunction is the temp where the chip shuts itself down to protect itself. Tjunction of this chip is 100'c, this is the temperature in the centre of the IHS on the outside. On XS forums they maintain there is 15'c in the difference between this temp there and inside the cores where coretemp measures, but the chip will start to throttle about 5'c before this.

100'c-15-5=80'c before throttle, 75'c just to be sure

KamiKazi

Nice build dude

ricka05

KamiKazi wrote: »

Nice build dude

Thanks KamiKazi

To pass occt on 3600 had to rise Vcore to 1.375. next is 3700 and 24h prime....:eek:

ricka05

OK , 3D MARK rezults :
Stock





CPU-350 x 10 , GPU - 750/1260/1880