lomo fisheye developing

melekalikimaka

i'm sending in a reel of lomo fish eye asa 200 to be developed, was in a reasonably well lit living room for most the photos with flash, just wondering is there anything i should request when getting them developed, first time an all?

shrapnel222

is it normal development or cross processing?

in any event the first role is probably best processed as is. Have a look at the results, and decide next time what you might need done differently. I've had quite a few roles done and have never needed done exposure wise, however, i've often had to send them back as the prints were cut wrong due to the large amount of black in the negative itself, so the machine usually needs manual intervention which not all developpers are ready to do.

Fajitas!

Don't cut the film.

ThOnda

Don't worry about cutting the film - they can do that for you independently from the transitions between frames. But I won't recommend them...

shrapnel222

i'm talking about the cutting of the prints, not the negative

Placebo

i got it developed normally, had huge black surrounding...:rolleyes:

anyway i didnt know that took a battery and i havent used it in a while and now its leaked in

melekalikimaka

went for standard in the end, shots were all of peeps in tuxs so crossprocessing might be a bit much