reciever wobble

Gatling

ok seen the barrel wobble threads ,

now how do i sort the bad upper reciever on my dboys m4 ,feels likes its going to fall off ,

and need to lock my front sight down missing a tiny screw,

any ideas for a quick or inexpensive fix that i wont have to do every few weeks

kdouglas

super glue

Gatling

kdouglas wrote: »

super glue

that just might sort the front sight,;)

the lobsided /wobbly reciever im more bothered about ,

Stercus Accidit

Insulation tape to take up the wobble space.

The front is a standard grub screw if you can find the right size.

Chunks

I have the Dboys M4 CQB and recently it's started giving me trouble with my mags.

The problem:

The mags when they're put into the magwell on the AEG don't align with the hole in the AEG for the BB's.
Therefore the catch can't lock into place and keep the mag in the gun and the BB's don't get fed into the feeder hole

The cause of the problem:

The reason this happens, after some taking apart, was that the feeder hole in the gun doesn't align with the feeder hole in the mag. The feeder hole in the gun has been pushed to the side slightly which means they don't align.

The reason for this:

the reason the feeder hole in the AEG is misaligned is because the barrell moves slightly left and right. This is due to the front part , the front handgripp part, over screwing slightly, thus pushing the barrell(and along with this the BB feeder hole) round slightly....

Everytime I try to load a new mag I have to twist the front part to the right slightly to make sure the feeder hole is aligned in the centre for the mag to fit into it.


anyone know what i'm on about? It's a bit hard to explain
anyone ever had a similar problem?

thanks in advance.

kdouglas

you could try turning the delta ring to remove the twist in the barrel/hand grip



the part you need to turn is the "spikey" bit just infront of where the arrow is pointing

Chunks

kdouglas wrote: »

you could try turning the delta ring to remove the twist in the barrel/hand grip



the part you need to turn is the "spikey" bit just infront of where the arrow is pointing

Ok, i'll have a look at that later and see if there's something 'spikey' there. However, to be honest I didn't see anything like that on it when I took it apart before...

I'll take it apart and take photo's when I get home and post em up. Hopefully that will help get my problem across in more detail.