Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

no sound due to my wiring ?

  • 22-09-2007 7:33pm
    #1
    JMSE
    Registered Users, Registered Users 2 Posts: 906 ✭✭✭


    Up to now I've had my Ferguson FTA receiver working fine. I've had a feed straight from the dish to the LNB in port on the receiver and I've hooked the receiver up to the telly via scart cable. It worked fine only its a flatscreen TV on a wall and I dont want wires visible anywhere around it.

    What I've done is I've mounted the FTA receiver up near the ceiling on a shelf across the room from the tv. Its too far away for the scart to reach obviously so I took a feed from the RNF out port on the receiver and brought it to the ANT IN port on the tv. After searching for a signal on the tv it found the signal coming from the sat receiver, only theres all picture no sound.

    Anyone out there understand why I've no sound?


Comments

  • #2
    conax
    Closed Accounts Posts: 278 ✭✭conax


    go into the settings menu of the FTA box and check that the audio standard is set to PAL I and not PAL B/G no harm to check the same on the channel you tuned it to on the TV if that does not work.


  • #3
    JMSE
    Registered Users, Registered Users 2 Posts: 906 ✭✭✭JMSE


    Worked! Thanks very much.

    The internet is a marvellous thing init?


Advertisement