New watercooling kit

papu

new wc kit

D-tech Fuzion block




Laing ddc2 pump


Mcr220 Rad


swiftech Microres



Will post pics of it installed, once i get tubing coiling , dye and cathodes

will also post oc results

all of it

awhir

you got those off nibble dident ya

papu

awhir wrote:

you got those off nibble dident ya

i did and all

nibble

He gave you a good deal too;) .

awhir

its a nice kit man hope you do well and not pussy out at not going higher then 1.5

what case you got.

papu

IM shoving it all into this!!!

http://www.jeantech.com/nitro.htm

cept its black

are you goin to gamecon it should be done by then

Anti

I seen this case with all his stuff in it at midland, looks very well. Hope there is enough room for all that w/c gear. Would be pretty sweet if you mounted the rad in the front of the case. But then, where do all your hdd's go ?

papu

Anti wrote:

I seen this case with all his stuff in it at midland, looks very well. Hope there is enough room for all that w/c gear. Would be pretty sweet if you mounted the rad in the front of the case. But then, where do all your hdd's go ?

where else but behind it!!! anti you comming to gamecon? it will be finished by then

Anti

papu wrote:

where else but behind it!!! anti you comming to gamecon? it will be finished by then

Yep, ill be there. Should have some watercooling myself

papu

Anti wrote:

Yep, ill be there. Should have some watercooling myself

excellent

conzy

Anti wrote:

I seen this case with all his stuff in it at midland, looks very well. Hope there is enough room for all that w/c gear. Would be pretty sweet if you mounted the rad in the front of the case. But then, where do all your hdd's go ?

All me tbh

awhir

conzymaher wrote:

All me tbh

?

papu

conzymaher wrote:

All me tbh

he tidied some sata cablesl...;/

awhir

Anti wrote:

Yep, ill be there. Should have some watercooling myself

start a thread about it and show us what ur buyen.

conzy

papu wrote:

he tidied some sata cablesl...;/

Lies, you observed the build

papu

conzymaher wrote:

Lies, you observed the build

still mine, you didnt get paid hahahahah

papu

right i was bored so i decieded to mount my rad

and go from this


and this



to this




not so hard you might say? however there are 3x hard drives behind those fans and a monster 2900

suffice to say its done , its not EXactly straight 3degrese off ( i measured it )
but it will do

no we play the waiting game

Anti

Looks good man. Very impressed.

papu

awww schucks ....:o

you aint seen nuthin yet

awhir

nice work.now it comes to not spillen water all over ur mobo

nibble

Looks nice and clean, which is alway good.

awhir wrote:

nice work.now it comes to not spillen water all over ur mobo

That's exactly what I did when filling the last time, no power to the mobo so all was good, luckily.

papu

kit came today from petras hopefully assemble it on sunday

nibble

SO that's why you weren't in school today:D . So you got my stuff too, yeah?

papu

no i had a head cold didnt know this was comming

yeah :P

Anti

Cant wait to see this stuff all assembled:)

papu

me either XD

nibble

Me three!!

papu

right so me and nibble got this thing put together today was great fun but worrying at times ,

for a starter the sata headers came straight off the board which nearly made me **** my pants , we got those back on ok tho...pheewww

then we had it all assembled ready to turn on when...nuthin....pump was going everything lighting up...so what the hell is the matter??!?!?!/ we tryed turning it on and off a half dozen times when i said we'll remove the ram...

what the hell on of the white holders had fallen off the ram slot and one of my rams were hanging loose?!??!/1 arghHH!H!H!H!?!?! ****ign ****ty board i said and we switched it to the other 2 slots blue and blue...when what the hell happens one of the blue ram holders falls off ! omg i nearly kicked the bloody thing.... but after 20 mins of removing my gfx and such we got the ram back into dual channel mode ...pheww....soo in the end everything worked out well hope you like it , it was over all enjoyable but bloody nerve recking enclosed are pics !

awhir

nice job looks like nibble done allout of the work hehe

papu

nowai! me, he was very helpful though , more of a supervising role he took

conzy

Looks great papu, good job nibbles

maybe someday you will build your own pc paps?

papu

conzymaher wrote:

Looks great papu, good job nibbles

maybe someday you will build your own pc paps?

h8 you?

anyways update on stock 2.13 i Idle 21 and load at about 33

now im at 3.2ghz @ 1.51vcore idling at 24 and loading at 40

1million supapi in 17.265 secs

awhir

bah 3.2 get to 4ghz and i will be happy.

Anti

Nice build man, looks awesome.

nibble

Anti wrote:

Nice build man, looks awesome.

Makes you want to go water again, eh?

awhir wrote:

bah 3.2 get to 4ghz and i will be happy.

He can't he's got a crippled chip from costa rica:p .

papu

nowai!

3.4 @ 1.53v

with mch / ichio stock

gonna mess around with them now and get to 3.6

papu

hit a wall at 3.4 ghz 23 idle and 40 load is nice though , to bad the chip cant do more cause the board certainly can , i was booting intoo windows at 3.6 but immediate blue screen any ideas?

awhir

post ur in bois settings.get ur batch number of the chip and google it and see what ya get.

nibble

awhir wrote:

post ur in bois settings.get ur batch number of the chip and google it and see what ya get.

I wouldn't really put a lot of faith in batch as an indicator of how a chip will clock. Try dropping the multi and finding your max FSB if you haven't already, and run ram 1:1 at stock timings so you can take that out of the equation.

Endurance Man

Sounds like a quality motherboard . Looks cool though.