Speedloader problem

cpb

New to airsoft and boards sorry if this is a real stupid question but just got some mid cap mags and a speed loader when I put the loader into the mag and press the plunger the bbs go into mag and when I release the plunger the bbs fly back into loader. What am I doing wrong ? Thanks

tonyj_mc

sounds annoying, there sould be a little spring loaded clip on top of the magazine that keeps the bbs in until its inserted in the AEG, try loading a couple of BBs by hand and seeing if that stays in.

Fiach Dubh

Try and hold the loader at about a 45 degree angle with the loader leaning away from the little catch that holds the BB's in the mag. If that doesn't work try only pushing the loader nozzle a slight way into the feed port not so the loader main body is flush with the mag. I've seen that problem before with some of the cheap loaders you get with clones, I have two clone loaders and one Tokyo Marui loader, the clones do it sometimes but the TM doesn't. The method above should work, it's just a question of getting the technique down.

cpb

The bbs load by hand no problem and it is D-Boys loader so I will try the other way when I get home. Thanks Lads

ED E

HOLD the plunger down and remove the loader, this should allow the catch back into place stopping the BBs.

The difference between loaders is some have a claw thinghy which blocks the tube until the loader is pressed. Others don't.