King Arms VSR-10 GAS CYLINDER

petergriffin20

http://cgi.ebay.com/King-Arms-VSR-10-GAS-CYLINDER-Upgrade-Chamber-KA-PA-04_W0QQitemZ270135579761QQihZ017QQcategoryZ31685QQtcZphotoQQcmdZViewItem

Has any1 bought or even reviewed this? If they have could they tell me if its any good. Thanks in advance.

gandalf

Won't an upgrade like this up the power above the 1j mark?

tonyj_mc

think i remeber rreading beofre drove the power up to 400-500 FPS well above the 1J mark

petergriffin20

I was just curious if its a illegal I wont bother. Are ye sure?

gandalf

328fps with a 6mm .2g bb is the legal limit. An upgrade like this will push the VSR way above this so yes it is illegal to hold it without a license and you wouldn't be able to use it at any skirmish sites over here.

petergriffin20

Thanks for the heads up guys.

EyesOnly

I did a lot of research about most of the Gas cylinders out their and the king arms is 500-700fps, the rest are about the same (but all above the Legal limit). Best option is to get a new spring powered cylinder , their are Pre-assembled cylinder kits and all you need is the spring (1j spring like the "Prometheus MS100 spring"). Its Also recommend to upgrade the Trigger sear and get a Piston sear BUT i read its not needed.

Harekin

This upgrades power also depends entirely on what gas you use aswell. Does it give a chrono reading for it running on 134a?

o1s1n

Harekin wrote:

This upgrades power also depends entirely on what gas you use aswell. Does it give a chrono reading for it running on 134a?

It wouldnt really matter though. Even if you only plan on using a weak gas, the gun itself would still have greater than 1 joule potential.

Harekin

But so does a decent KJW's full metal pistol...mine can penetrate both sides of a coke can effortlessly on that Cybergun gas I had that day in your place.

o1s1n

There's a huuuuuuuuge different between a gas powered sniper and a kj works gas pistol.

A gas sniper pushing those fps would be able to penetrate every part of the can. including the top thick metal. Would be able to shatter a glass.

I don't really trust the through both sides of a can test. On the poor mans chroo it says -

BOTH SIDES
(BB makes it straight through and exits on the other side) 350 to 370fps

Now I'm starting to think that's greatly exaggerated. My sniper rifle can do that but when I chronographed it I got 328fps on the dot.

Best thing to do would be to chrono it out in HRTA some day.

petergriffin20

My rifle at the moment can pierce coke cans on both sides and break bottles from about 12 feet away without any modification.:eek:

o1s1n

Seeing as the OPs questions have been answered and this is just going to turn into a "my gun can break X from X distance!" thread, I think it's best locked.