Biggest lemon you ever bought?

Fiach Dubh

I'm wondering what's the worst AEG, AEP, GBB or whatever each of you have bought. Try and give a bit of detail why. I'll kick off.

JLS FN SCAR

Why it sucks:
Motor not on a mount, just shoved into the gearbox and held on by the grip. Also inefficient, needs a 9.4v battery to operate properly.

Hop-up has airleak on many production models, hop setting rolls back during operation.

Inner barrel not mounted properly so it pushes down causing bad accuracy.

Reciever glued together so you have to break the screw tabs to access the gearbox :mad:

Screws made of pot metal, mag release grub screw snapped at the head after 2 days.

Outer barrel wobbles badly, so does the folding stock.

Rotten paint work on metal parts.

Not even cheap by a clones standards, cost me about 130 Euro with shipping :eek:

Put the rising clone quality back a good few months

tonyj_mc

a crappy G-36 think it was by both elephant,

Reasons it cost €100 deliverd from the uk,
Had feed problems, got jammed up and when i went to open it up there was like twenty screws to be taken out before i could get near it(my mate has the TM
P-90 and my how i ennvied him that day) then the outter barrel was superglued in place really annoying esp after all the screws

really cheap plastic,
Really low FPS,
tonnes of cheap accs with it,
bad build quality,
very very light

CrazyRabbit

It was 4 inches long and 3 inches in diameter. Grown in Spain & bought in Tesco's.

.
.
.
.
.
.
.
.
Sorry, someone had to post this....

Mark_Sc

haha

The Master

TM Combat Delta EBB

Horrible Horrible piece of stuff all together.
Ran off 4 AAA batteries , Looked awful , fired badly and most bizzare of all took a banana shaped magazine that held 12 rounds.
Wasted €30 on this piece of junk before I knew what real airsoft was.
Took it apart completly a few weeks a go to get the motor out of it for another project and the internals were muck too.
Hit myself in the bare leg with it once by mistake and barely felt it.
EBB's suck big time

padmundo

Mine was a horrible cheap plastic springer made by KWA that fired the top slide off when you pulled the trigger... still have the remnants... don't know why!