Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Damp found under bath

  • 01-06-2007 10:01am
    #1
    Registered Users, Registered Users 2 Posts: 461 ✭✭


    Hi,

    I was wood panelling the bath last night and found damp soggy plasterboard on the wall. There is polythene behind this (damp to touch) and pvc water pipes at ground level.

    Looks like I'm going to have to rip the bath out to investigate.

    Should I get a specialist in for this job?

    Cheers


Comments

  • Registered Users, Registered Users 2 Posts: 8,071 ✭✭✭10-10-20


    Are the floorboards affected?


  • Registered Users, Registered Users 2 Posts: 2,876 ✭✭✭Borzoi


    Howitzer wrote:
    I was wood panelling the bath last night and found damp soggy plasterboard on the wall. There is polythene behind this (damp to touch) and pvc water pipes at ground level.

    It could just be the silicone sealant at the edge of the bath needs to be replaced. Leave it alone for a few days (not using the bath) and see if it dries out - a small fan might help shift air in behind the bath to dry it


  • Registered Users, Registered Users 2 Posts: 461 ✭✭Howitzer


    The plastic bath siding has been off for the day - and it seems a bit dryer in there.

    It's a concrete floor beneath. No damp on the floor.
    One wooden batten of the bath support it brown with damp.
    Maybe its not a major job. Will leave it to air and then see.

    All bath sealant is new and looks in tact.

    (Just moved into this house btw - so finding little surprises like this is part of the deal!)


  • Closed Accounts Posts: 139 ✭✭flocker


    As Borzoi said
    It could just be the silicone sealant at the edge of the bath needs to be replaced
    or any bath trims.
    They look OK when the bath is empty but you should have a look when you are having a bath ( or shower if their is a shower over the bath ). Depending on how well the bath is supported it may sag slightly with the weight of water and a body in it.


  • Registered Users, Registered Users 2 Posts: 9,815 ✭✭✭antoinolachtnai


    Or fill the bath with water and have a look. You might just see something then.


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 29,095 ✭✭✭✭looksee


    You should fill the bath with water before putting bath sealant on, helps prevent this problem. Yes I know its a bit late to be telling you this now :D


  • Registered Users, Registered Users 2 Posts: 461 ✭✭Howitzer


    good tip! - not too late - will be re-sealing soon anyway.


Advertisement