Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Ice Broadband - Belkin Router F5D733-4

  • 14-03-2007 9:57pm
    #1
    Registered Users, Registered Users 2 Posts: 448 ✭✭


    I cannot connect to the Internet - there is no connection at all through the Router the BB is working fine but cannot connect - it willl ping the Ip fine but not the next one as per below


    d) Type ping 66.102.9.104. If the ping times out then the problem is between your router and internet connection. If you get a response, move to step e)
    .

    What do I do or change to rectify this - Im going insane!


Comments

  • Registered Users, Registered Users 2 Posts: 448 ✭✭Diddler82


    Anyone?


    5 different places I put this - mainly tech support forums and no responses anywhere...


  • Registered Users, Registered Users 2 Posts: 598 ✭✭✭arseagon


    You need to provide more information. Noone can help with the info you have given. Please add the following:

    What model is the Belkin. (Belkins are muck IMO)
    How have you it configured. E.g. Static or Dynamic IP?
    What is the internal IP range.
    What is your DNS set to. (This is most likely the problem. If you can ping an outside IP but can't get websites to open, your PC is probably not resolving addresses properly.)


  • Registered Users, Registered Users 2 Posts: 448 ✭✭Diddler82


    Thank you for the reply

    1. F5D733 - 4
    2. Configured to static and changed as per the IP assigned by Ice
    3. Internal IP range - unsure
    4. DNS - as per Ice assigned

    Any ideas what could be wrong? As I said it is working fine when connected through the Ethernet port but when I go and try configure it comes up "Link Down"


  • Registered Users, Registered Users 2 Posts: 598 ✭✭✭arseagon


    I can't seem to find that model on the belkin site but anyway. Make sure the following is checked:
    • The Broadband connection is going into the Wan port of the router.
    • The Ice assigned IP and gateway IP is allocated to the wan port of the router
    • The internal range should be set to something like 192.168.x.x
    • On your PC (using a cable plugged into the Lan port of the router) assign an IP e.g. 192.168.0.10 and gateway is the router. If the router is 192.168.0.1 then this is what you set the PC's gateway address to.
    • Make sure you can ping the gateway ip address
    • Try using open DNS for the DNS settings these are 208.67.222.222 and 208.67.220.220


Advertisement