Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

PC wont boot after case change, help ASAP!

  • 08-06-2006 7:00pm
    #1
    conzy
    Subscribers Posts: 6,408 ✭✭✭


    I got my Lian Li PC 7 plus se today!

    So i spent most of the afternoon swapping everything from my old case into the new case.

    I re-seated my Freezer 64 pro as it was facing the wrong way, and I fitted a Zalman VF700-cu to my X1800XT.

    When I try to boot, I get 3 red leds and a blinking red led. The there is one long beep and then it wont post........

    I have tried disconnecting my DVD drive and HDDs and still no luck......

    What will I do?

    I dont want to have to strip it down again:(
    P.s Could the X1800XT "know" that its fan connector isnt connected, as the Zalman's fan gets it's power from a molex plug


Comments

  • #2
    Dooom
    Closed Accounts Posts: 2,808 ✭✭✭Dooom


    Check your manual, it'll say what the various beeps and lights indicate.
    Mobo's seated properly on its mounts?
    All power connections connected properly?


  • #3
    Cuddlesworth
    Registered Users, Registered Users 2 Posts: 14,012 ✭✭✭✭Cuddlesworth


    I think 3 is ram, make sure both sticks are in properly.


  • #4
    Alkers
    Registered Users, Registered Users 2 Posts: 6,908 ✭✭✭Alkers


    Possibly mobo shorting on the case?


  • #5
    awhir
    Registered Users, Registered Users 2 Posts: 4,227 ✭✭✭awhir


    heppend to me it may be your psu.but first build the whole thing outside the case and it should work.


  • #6
    conzy
    Subscribers Posts: 6,408 ✭✭✭conzy


    I tried re-seating everything........

    But I decided to clear the bios before stripping it all down and it worked!!

    I dont know why it needed a Bios clear as no hardware has changed..........

    Unless I plugged the SATA drives in different ports this time?

    Anyway Its alive and thanks to all:)

    P.s I will read the manual next time:D


  • Advertisement
Advertisement