Sky box on the plink!!

eamoss

I know what the problem is with my sky box but I dont know which number I have to type into the RF output channel to get it to work. I have Sky+ & Sky D Sky+ is on 607Mhz and SkyD is on 679Mhz. On Sky+ the RF output channel s 38 and this is how I change it I click services >> 4 >> 01 >> select >> 4 >> 38 but how do I know the RF number of my SkyD and how to change it?

Tony

eamoss wrote:

I know what the problem is with my sky box but I dont know which number I have to type into the RF output channel to get it to work. I have Sky+ & Sky D Sky+ is on 607Mhz and SkyD is on 679Mhz. On Sky+ the RF output channel s 38 and this is how I change it I click services >> 4 >> 01 >> select >> 4 >> 38 but how do I know the RF number of my SkyD and how to change it?

you do exactly the same , system set up and 01 select

eamoss

But notting happens!!!! BTW I cant see anything on the screen its just fizz no sound!

Rippy

err... 679 mhz is channel 47 if that is what you are asking. Try connecting with a scart lead so you can see what you are doing when you chanfe the rf output. Remember to press select after entering ch number!

Tony

eamoss wrote:

But notting happens!!!! BTW I cant see anything on the screen its just fizz no sound!

well if you dont have a screen in the first place obviously you cant see whats happening on the menus! Would have thought that fairly obvious. Either re tune your tv till you get a picture or use a scart as Rippy suggests