Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Voltage tolerance's

  • 08-03-2004 10:15pm
    #1
    VeVeX
    Registered Users, Registered Users 2 Posts: 1,391 ✭✭✭


    Building up a third PC with an AMD 2800+ , Abit NF7 v2.0 , Ti4200

    Was using a 250w PSU in an old case and decided to buy an Antec Lanboy with 350w Smartblue PSU. I was watching the Volts in the bios with the other PSU and they seemed a bit off. I was just wondering what would be an acceptable scale on the voltages with the 350w.

    Heres a read off from Sisoft sandra....

    Mainboard
    Manufacturer : http://www.abit.com.tw/
    MP Support : No
    Model : NF7-S/NF7 (nVidia-nForce2)
    Version : 2.X

    System Memory Controller
    Location : Mainboard
    Error Correction Capability : None
    Number of Memory Slots : 3
    Maximum Installable Memory : 1GB
    Bank0/1 - A0 : DIMM 128MB
    Bank2/3 - A1 : Empty
    Bank4/5 - A2 : DIMM 128MB

    Chipset 1
    Model : Abit Computer Corp nForce2 AGP Controller
    Bus(es) : ISA AGP PCI USB i2c/SMBus
    Front Side Bus Speed : 2x 175MHz (350MHz data rate)
    Width : 64-bit

    Logical/Chipset 1 Memory Banks
    Power Save Mode : No
    Fixed Hole Present : No

    Memory Module(s)
    Memory Module 1 : MOSEL V826616J24SATG-C0 A6000110 128MB 4x(16Mx16) DDR-SDRAM PC2700U-2533-700 (CL2.5 up to 167MHz) (CL2 up to 133MHz)
    Memory Module 3 : MOSEL V826616J24SATG-C0 AA000110 128MB 4x(16Mx16) DDR-SDRAM PC2700U-2533-700 (CL2.5 up to 167MHz) (CL2 up to 133MHz)

    Environment Monitor 1
    Model : Winbond W83627HF ISA
    Version : 2.01
    Mainboard Specific Support : No

    Temperature Sensor(s)
    Board Temperature : 24.0°C / 75.2°F
    CPU Temperature : 39.5°C / 103.1°F

    Cooling Device(s)
    Auto Fan Speed Control : No
    Chassis Fan Speed : 2538rpm
    CPU Fan Speed : 2616rpm
    Power / Aux Fan Speed : 1705rpm

    Voltage Sensor(s)
    CPU Voltage : 1.63V
    Aux Voltage : 2.66V
    +3.3V Voltage : 3.28V
    +5V Voltage : 4.97V
    +12V Voltage : 11.86V
    -12V Voltage : -12.45V
    -5V Voltage : -5.05V
    Standby Voltage : 4.92V
    Battery Voltage : 3.54V

    Its a little overclocked , But I need to get me some pc3200/pc3500 . Had 256mb of PC2700 lying around so thats all im using in it for the minute.

    Thanks


Comments

  • #2
    Col_Loki
    Registered Users, Registered Users 2 Posts: 2,761 ✭✭✭Col_Loki


    Yea there perfect , nothing to worry about there. If your really worried then open abits hardware doctor (on abit cd) and use prime95 (stress test) and keep an eye on them.


Advertisement