Retro Tech Support Humour 1983-94

Capt'n Midnight

Support, Santa Cruz Style or Where Do These People Come From?
by Jeff Liebermann (jeffl@comix.santa-cruz.ca.us) 07/09/94
(All these really happened to me since 1983.)

1. "My hard disk won't boot." I suggest they take the floppy out of drive A:. Later when I arrive, they have successfully removed the floppy drive from the machine (with the floppy disk still inside).

2. "My dog goes nuts when I run Windows. No problem with any DOS programs." Her monitor had a cracked flyback transformer. When the multisync monitor switched scan rates upon entering Windows, the high frequency audio produced by the broken flyback was heard by the dog.another psysic dog

3. "Michaelangelo virus ate my hard disk, but I have a tape backup. Can you help me restore the system." No problem. When I arrive, I find the data on the tape was 18 months old and that she had never run a backup. "I thought you just shoved in the tape and it sucked up the data."

4. "How do I get on the national data information super highway?" I ask if he has accounts on any bbs's. He has Netcom, Compuserve, and others. I tell him he's already on the highway. "Is that all there is?" I hangup.

5. "What's the fastest way to move 500MBytes of data daily from Santa Cruz to Los Angeles?" Answer: FedEx. 1990's remember ...

6. How many RJ45 connector does it take to build 8ea 10baseT cables? Answer: 45. I put the first 16 connectors on with one end backward. I then chopped off the good ends. Chopping off the other 8 connectors and effectively starting over consumed another 16 connectors. The 2nd try resulted in one end being mirror-imaged. Chopping of 8 more connectors I finally got them wired correctly. Then I tested them for continuity and found 5 bad crimps. Total=45.Been there

7. "What kind of hard disk do you have?" Well... It's black with a little red light ... (groan).

8. Most common support call. "I lost my CMOS setup. How many heads, cylinders, and sectors does a _______ drive have?"

9. "I move the mouse in any direction and the cursor only moves an inch or so on the screen and stops." Take the foam shipping ring out from around the mouse ball.


10. "My systems on fire. What do I do?"
Ummmmm. Turn it off? "(Click)"

11. Most hated support call: "I'm not sure if we need a computer system. Can you give me the relative advantages of Unix, DOS, Windows, Novell, MacIntosh, Sun, etc...?"

12. Favorite software support call: "I just installed Word 6.0 for Windows. It's really big and slow. How much will it cost to upgrade my machine?"

13. "My floppy drive won't read disks." I suggest they clean out the dust from the drive. "I can't." Huh? "The dust won't move". I find that they were using spray glue near the machine and that all the dust was glued in place.

14. How to impress a new customer: I walk into the computer room and knock the fire extinguisher off the wall which immediately sprays everything with dust.

15. "My printer stopped working." Turn it upside down and shake out the staples and paper clips. Works every time.

16. "Can you teach me how to use a computer?" I answer: No. I just fix the machines, I don't use them.

17. The company motto: "If this stuff worked, you wouldn't need me."

18. From one of my smarter clients: "Why is something broken every time you're here?"

19. "I'm trying to install a 2nd IDE drive. Support told me to take out ALL the jumpers." How many did you take out? "12". (What they meant were the two easily accessible jumpers).

20. I call a manufacturer to order a manual on some junk I picked up surplus. The receptionist asks my name and company. She notes that I'm not in their database and could she have my address and phone numbers. No problem. I'm then transfered to the customer service department which notes that I'm not in the database and asks for the same information. The customer service person transfers me to the the parts department which notes that I'm not in the database etc... Since the manual will take a few days to arrive, I ask for tech support who notes that I'm not in the database etc... The manual arrived promptly followed by 4 identical envelopes of promotional literature with exactly the same name and address.

21. Question LEAST likely to be answered correctly by support: "What is the current version of your software/hardware/firmware?"

22. Pacific Telephone Support Dept (Dial 611 for repair service), now asks you to punch in your phone number, and then warns you that you will be asked to verbally recite the same number when the service operator answers. I wonder what happens if they're different?

23. Email from a friend: "CanYouFixTheSpaceBarOnMyKeyboard?"

24. Fax back information service for additional information from one vendor requesting just one item returns a copy of their catalog page plus 10 pages of promotional garbage.


25. Email autoreply from support@_______.com
Thank you for your support request.
(drivel deleted)
Please refer to support request number:
Error: cannot create /u/something/filename
(4 lines of garbage deleted)
in future correspondence. Your request will be processed
in the order received.
(more garbage with Out of space on hd(1,41) mixed in.)

26. Conversation with support at a certain controller manufacturer.
"I can't answer that, please call your dealer."
"I am the dealer."
"Then call your distributor"
"He said for me to call you"
"Then have the customer call us"
"AAAAAGH!"


27. Modems and payphones don't mix. I hotwired my laptop into the mouthpiece of a payphone and proceeded to do system maintenance on a customers machine. The sheriff arrived shortly and proceeded to interrogate me. Someone called complaining that I was using a computer to steal money from the payphone.

28. Having my system page me when it does an unscheduled reboot was a good idea. Having all my customers machines do the same was a mess after a power failure and 100+ pages.Hate dah...

29. "My hard disk has a virus!" How can you tell, I ask? "When I type DIR, it says VIRUS and some date stuff." (Hint: Never name the directory for virus scanning software VIRUS).Been there

Capt'n Midnight

30. Some monitor manufacturers suggest using alchohol to clean the screen. They forget to mention that the monitor should be off. (Boom).

31. I told a customer to take his machine to a gas station and have them blow the dust out. The gas station hands him a 150psi air nozzle that belches rusty water and oil. I got to clean up the mess for free. He also mangled the floppy heads with the high pressure.I know of someone who had a motherboard blown out of his hands by an overenthusastic compressor user ,sail out a upstairs window and luckily enough landed on some cardboard boxes - and it still worked

32. Oxymoron candidate: Disk Protector. That's the cardboard disk they shove in the floppy drive for shipping. More drives have been mangled by shoving in the wrong shape, backwards, or bent than have ever been protected by them. Use a floppy disk instead.

33. What's the difference between a Van DeGraf static generator and a belt driven vacuum cleaner? Answer: Not much. Don't use a vacuum to clean your computer.

34. After the cleaning service crashed the computer for the 4th time by plugging the floor sweeper into the UPS, I decided to take action. I suggested they install "child proof" plastic plugs in any outlets deemed worthy of protection. The order went though the chain of confusion, and I was soon blessed with 1000 child proof plugs hot stampled with "Protected." I gave instructions to install about 10 of them on the protected outlets. However, the maintenance person assigned to the task knew nothing and proceeded to plaster every outlet in the building with the plugs. Mutiny was averted by spending all night removing the monsters. Three years later, they are still appearing.

35. Hint: Do not allow long hair black cats to sleep atop laser printers and tape drives. The black hair is almost invisible in black pattens, gears, and rollers.

36. Forensic filth analysis is a new part of computer repair. I now carry a microscope and some chemicals which are used to determine the exact nature of the filth I remove from keyboards, mice, computers, light pens. While nobody pays me to do this, it definately adds to the entertainment value. :eek:

37. Why do customers think that I maintain a document and device driver library for every conceivable board ever made?

38. From a hard disk drive manufacturer: "The drive stopped working. I poped the little plug and noticed it was awful dry inside. I added some oil but it didn't help."

39. Which arrow key? There are 17 arrows on the keyboard.

40. Favorite error message: "Out of paper on drive " This was produced by a timeout error on a slow WORM drive and a defective AT/IO card.

41. At one time, I was into antique furniture. When I purchased my first computer (IBM 4.77 PC), I decided that it deserved a suitable antique table. I ask the local antique dealer: "Do you have an antique computer desk?" He looks at me with a strange look and says: "They didn't have computers when this stuff was made."

42. When 3.5" floppies first appeared, some users were confused with the operation of the write protect window. One user wanted to be doubly sure that the disk would be safe from his mistakes. He correctly opened the window and just to be sure, covered it with one of the magic write protect tabs from a 5.25" floppy.

43. Favorite Windoze game: "Guess what this icon does?"

44. A video store installed the computer on top of the cash drawer. Every time the cash drawer would open, the hard disk would get a good bouncing. I decided that this was technically disgusting, and moved the machine. The next morning, the drive wouldn't spin up (stiction). Solution: Put it back on top of the cash drawer and let it bounce. A good deed never goes unpunished

45. The curse of the mad labeler. Some of the clone cards I see have stick on METALIZED labels that a quite good at shorting traces. I've fixed a few by just removing the stick-on short. A variation on this effect is the tendency for some distributors to put stick-on labels on TOP of their 486 chips. Then they smear on some silicone grease and bury the mess under a heat sink and fan. The air gap produced between the chip and heat sink severely degrade its cooling value.

Treetypie

you know the classic enquiry?

Excuse me sir but I can't seem to find the ANY key?

Capt'n Midnight

Or the other one - Press del to enter setup
Old Dell keyboards had a plastic "Dell" badge ....

Töpher

Kept me in good form!

quank

man, what a read! :rolleyes:

kmart6

I need to go to sleep after reading that,good all the same

Civilian_Target

I'm sorry, but I can't seem to find the CD-ROM drive on the computer, but the retractable coffee-cup holder was a very thoughtful addon.

oneweb

Dammit! Civilian pipped me to the post

KoNiT

The Foot pedal doesn't work right...

Capt'n Midnight

Originally posted by KoNiT
The Foot pedal doesn't work right...

You're supposed to take it out of the bag...

Seth Brundle

I had a (mature?) student recently place a floppy disk on the CD tray and was about to click the open/close button before I screamed "NO"
K.
(honest to God!)

Civilian_Target

Never tried that. Sounds interesting....