Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

AZBOX /Elite / HD / Premium

1121315171820

Comments

  • Registered Users, Registered Users 2 Posts: 2,083 ✭✭✭carbsy


    RTi core RC11 Enigma 2

    What is new ?

    - Fix Reboot ( working now from menu in E2 )
    - Fix T/C tuner selection if no DVBS tuner on slotA
    - Fix AC3 PID detection on some channels in NA
    - Reactivated grab (video/osd) in driver
    - New grab app
    - Added modified Beyonce 9 skin modified by Matrix10 ( Skin should be faster )
    - Added Fan Control ( Menu -> Setup -> Fan Control , Turn On or Off for Premium+ and Ultra )

    Download:


    http://www.multiupload.com/LRJCKMQTSF
    ** In archive You will find AzUP 2.0.3 - Please use this new version to flash RC11 in Your receiver **


  • Registered Users, Registered Users 2 Posts: 447 ✭✭shinobi


    Upgraded to RTi core 11 today and am extremely happy. No crashes...as of yet. Sound still a bit of an issue by times, but can be over come by using time shift (Yellow button) for a second or two also by buffering the Audio/Video by about 500 ms. Recording works well. Sometimes system can be a little slow when navigating certain menus when system is busy (cogs start rolling).

    Not to forget that up to a few years back Sky boxes were crashing pretty frequently, not great for a pretty large revenue making corporation. These guys are voluntarily working on this project less than a year and it has really made the box useable.
    I've uploaded some screen shots for anyone who hasn't tried it yet and may be wondering what it looks like.

    picture.php?albumid=1647&pictureid=9126


    picture.php?albumid=1647&pictureid=9127


    picture.php?albumid=1647&pictureid=9128

    picture.php?albumid=1647&pictureid=9129


    picture.php?albumid=1647&pictureid=9130


    picture.php?albumid=1647&pictureid=9131

    picture.php?albumid=1647&pictureid=9132


    picture.php?albumid=1647&pictureid=9133


    picture.php?albumid=1647&pictureid=9134


    picture.php?albumid=1647&pictureid=9135


  • Registered Users, Registered Users 2 Posts: 2,083 ✭✭✭carbsy


    I like the new skin introduced in RC10.Does Cool TV Guide some as standard with RC11, Shinobi?


  • Registered Users, Registered Users 2 Posts: 447 ✭✭shinobi


    CoolTV_MultiQuick.zip

    It doesn't come as standard but I've attached the files to this post.
    Unzip & first put Cool TV.ipk on its own USB stick. It should be detected automatically otherwise goto install extension in plugins and select USB drive.
    Once thats done follow the same procedure for multiquick.ipk - this maps the cooltv EPG to the red button but you must select to reboot the box for it to take affect.


  • Registered Users Posts: 33 Cranium


    Thanks for all the information Shinobi.

    I've read how wired ethernet is required to update using AzUP from a PC.

    Is your box a premium ? If so, once updated, does your wireless
    networking work ?

    Or maybe someone knows,

    thanks...


  • Registered Users, Registered Users 2 Posts: 447 ✭✭shinobi


    I've the Premium HD box and have it wired directly to router and PC connects wireless to the router, so I'm not sure about the AZBox's wireless router.

    Also just to note that I used Jazup 2 to update Premium HD.

    Late edit.

    Wireless network to AZbox is showing up in available network connections.


  • Registered Users, Registered Users 2 Posts: 106 ✭✭Greenpiece


    Cranium wrote: »
    Thanks for all the information Shinobi.
    seeds'
    I've read how wired ethernet is required to update using AzUP from a PC.

    Is your box a premium ? If so, once updated, does your wireless
    networking work ?
    sszs
    Or maybe someone knows,

    thanks...

    Well I took the plunge again to RC11 and still having audio glitches. Tried setting up wireless but did not work for me, just getting green screen and reboots now when I try to change encryption setting.

    Also how do you get HDD to work, I do not want to lose recordings and did not want to go into initialize screen in case it wipes my hard drive.


  • Registered Users, Registered Users 2 Posts: 447 ✭✭shinobi


    Greenpiece wrote: »
    Well I took the plunge again to RC11 and still having audio glitches. Tried setting up wireless but did not work for me, just getting green screen and reboots now when I try to change encryption setting.

    Also how do you get HDD to work, I do not want to lose recordings and did not want to go into initialize screen in case it wipes my hard drive.

    Sorry to hear switch over didn't go as smoothly for you as it did with me.
    I had mentioned about the audio glitches in an earlier post and a work around which worked for me.

    You can still connect to AZbox via filezilla and download all recordings from box to PC, which is what I did prior to initialising HDD.

    This firmware does have some glitches, but the only way it will improve is by people trying it for themselves and reporting the bugs to the developers. Log files from the green screens are in the HDD folder which the developers ask for you to forward to them with an email address listed on the green screen.


  • Registered Users Posts: 257 ✭✭jimmyjim11


    Any one get saorview EPG to work only getting now and next & not 7 day ?

    On RC11


  • Registered Users, Registered Users 2 Posts: 915 ✭✭✭downwiththatsor


    jimmyjim11 wrote: »
    Any one get saorview EPG to work only getting now and next & not 7 day ?
    I had a problem initially when i scanned in Mullaghanish first and then scanned in my local transmitter after, even deleting the Mullaghanish channels did no allow the better signal saorview channels to display the 7 day epg as it had on the mullaghanish ones.
    I had to delete the DVBTa.dat file in disk2 folder and rescan.
    Might be your issue but might not?
    Hope it helps


  • Advertisement
  • Registered Users Posts: 257 ✭✭jimmyjim11


    In original firm ware or E2 my problem is in E2 :(


  • Registered Users, Registered Users 2 Posts: 915 ✭✭✭downwiththatsor


    Have made the change from original firmware to E2 Rc11, my tv is a little old and only had component inputs but still had an excellent picture with the original firmware set to 1080i.
    With rc11 i have tried to change the resolution of the component but there is only a default of 576i, hdmi is the only output that the resolution can be changed on as far as i can see.
    Anyone using component with 1080i resolution on any previous rc-versions pre 11?
    Have not even tried usb hdd recording or epg setup as yet, now back to the match.
    thanks in advance


  • Registered Users, Registered Users 2 Posts: 915 ✭✭✭downwiththatsor


    Have gone back to original fw for ease of recording and morsers epg etc.

    Just found this and am chuffed, have a hdmi fed tv in the kitchen and component fed tv in the living room where the azbox elite is, this program allows you to have a virtual remote on your laptop and change channels from anywhere via your laptop.
    Works for me on the latest original fw.
    Hope someone else finds it useful
    http://www.megaupload.com/?d=7ZMX54CW


  • Registered Users Posts: 38 happyhammer


    with E2, i can control with my android phone. Theres a few android apps for the dreambox, i'm presently using dreamdroid app


  • Registered Users, Registered Users 2 Posts: 447 ✭✭tipperary


    with E2, i can control with my android phone. Theres a few android apps for the dreambox, i'm presently using dreamdroid app

    Hi, is there any guide on how to get dreamdroid running with E2. Have it installed but can't seem to get it connected to the Azbox.


  • Registered Users Posts: 257 ✭✭jimmyjim11


    tipperary wrote: »
    Hi, is there any guide on how to get dreamdroid running with E2. Have it installed but can't seem to get it connected to the Azbox.
    Try

    create new profile
    > ip > address of azbox

    >port > 80

    enable login
    user name > azbox
    pass > dream


  • Registered Users, Registered Users 2 Posts: 104 ✭✭Beamobhoy


    Any of you guys managed to get the crossepg working off an external hdd? I am asking here as i know i'll get me head bit off if i ask for help on the RTi forum or satpimps! Mine works off the default location /autofs/hda3 but when i ask it to write it to my hdd (/media/hdd mounted as sda1) it writes to it but the listings never work. Any ideas lads? :confused:


  • Registered Users, Registered Users 2 Posts: 3,802 ✭✭✭Apogee


    Do any of the firmwares for the Azboxes support USB DVB-T devices?

    Looking at the Ultra HD as a cheapish blindscanner/4:2:2 box - would be great if it would do DTT too.


  • Posts: 0 [Deleted User]


    Hi guys, im looking at getting a Azbox HD premium, I was looking at the VU duo + but I think thats a little out of my leagur price wise, however the AZbox HD seems to be fairly close to the VU duo +, am i right in thinking this?

    Also does the Azbox HD premium now support the useage of both tuners now? I.E can I records DTT whilst watching Sat ?

    Would anyone recomend another box in this price range that is better or does this Azbox HD Prem still tick all the boxes?

    Thanks for your help.


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 535 ✭✭✭tapfit2004


    Hi guys, im looking at getting a Azbox HD premium, I was looking at the VU duo + but I think thats a little out of my leagur price wise, however the AZbox HD seems to be fairly close to the VU duo +, am i right in thinking this?

    Also does the Azbox HD premium now support the useage of both tuners now? I.E can I records DTT whilst watching Sat ?

    Would anyone recomend another box in this price range that is better or does this Azbox HD Prem still tick all the boxes?

    Thanks for your help.

    vu would be a more stable box according to most reports.

    I've an az premium plus, it allows watching one channel while recording another with whatever tuner config you want.

    The elite and premium models (the clones on sale all seem to be premium models) are combo boxes, ie you can have 2 tuners but can only use one at a time, even though they were originally marketed as twin tuner.

    I have the latest enigma2 (the software that runs on the vu and Dreamboxs) running on my az. Some people are happy with the original firmware that comes with the box but with the improvements that have come with enigma2 the zapping speed and plugins i wont be going back to the factory firmware.

    The enigma2 firmware is in beta so you will have to wait until its fully stable if you want it to match the vu and Dm800.


  • Registered Users, Registered Users 2 Posts: 2,083 ✭✭✭carbsy


    Apogee wrote: »
    Looking at the Ultra HD as a cheapish blindscanner/4:2:2 box - would be great if it would do DTT too.

    I have the Ultra and blindscanning is only supported on the original official firmware at present.Just to leave you know... no support in E2 for blindscanning option as of yet...


  • Registered Users, Registered Users 2 Posts: 3,802 ✭✭✭Apogee


    @carsby - have you used the Ultra for feedhunting? How long does a blindscan take?


  • Registered Users, Registered Users 2 Posts: 2,083 ✭✭✭carbsy


    Apogee wrote: »
    @carsby - have you used the Ultra for feedhunting? How long does a blindscan take?

    I have a long time ago when I used the original firmware.IIRC it used to take best part of 30 mins to blindscan 13e.


  • Registered Users Posts: 11 scullyonweb


    does anyone have iptv running on premium plus,
    i got the http_streams text file and ftp to disk2,then they all turned up in azbox menu under ip channels.but when i go thru them none clear!
    i'm connected to internet as youtube thumbnails update


  • Registered Users, Registered Users 2 Posts: 535 ✭✭✭tapfit2004


    Rti enigma2 ver 1. Is released tonight. Was being called rc13 but they must be fairly Happy with it to release it as ver 1.

    Sound problems are supposed to be sorted anyway.


  • Advertisement
  • Registered Users Posts: 96 ✭✭kerrywez


    Thanks hope they have the sound sorted now, will go look for it now.

    Regards wez


  • Registered Users Posts: 257 ✭✭jimmyjim11


    xosPe0 serial#dc6afa7b4b92f3f4b52f6ded65230ac8 subid 0x50
    
    xenv cs2 failed
    
    xenv cs3 failed¡øpower supply: ok
    
    dram0 ok (8)
    
    zboot (1) failed
    
    I get this when i log into putty is my box dead ?


  • Registered Users, Registered Users 2 Posts: 447 ✭✭shinobi


    jimmyjim11 wrote: »
    xosPe0 serial#dc6afa7b4b92f3f4b52f6ded65230ac8 subid 0x50
    
    xenv cs2 failed
    
    xenv cs3 failed¡øpower supply: ok
    
    dram0 ok (8)
    
    zboot (1) failed
    
    I get this when i log into putty is my box dead ?

    I'm also stuck on booting, didn't try putty as neither AzUP nor Jazup could determine an IP address. PC went dulally whilst updating E2 using Jazup. I tried requesting help on AZBox E2 forum but to no avail. I was using Jazup to update software but apparantly your only ment to use azup. After much searching I came across a thread on satpimps which tells you how to recover a dead box. I've just purchased a USB to TTL interface on Ebay to connect up to the box and then follow the directions given in the post. I don't think I've much to lose eitherways.


  • Registered Users, Registered Users 2 Posts: 93 ✭✭logger


    jimmyjim11 wrote: »
    xosPe0 serial#dc6afa7b4b92f3f4b52f6ded65230ac8 subid 0x50
    
    xenv cs2 failed
    
    xenv cs3 failed¡øpower supply: ok
    
    dram0 ok (8)
    
    zboot (1) failed
    
    I get this when i log into putty is my box dead ?

    Not sure if it will help you get over this issue, however some time back I found a source for the DOM modules that are in the azbox ( means that you can get back to a blank state with os, providing boot loader not corupt). As I say not sure if it will fix your current problem, however I had sourced one so I could experiment on a new dom module with newer firmware versions, and then when finished plug back in the one that everyone in the house is used to using.

    There are two variants on their site, not sure which on I purchased, however it was a 512MB and 1GB version both of which worked fine. The one that ships with the Premiumm model at least was 256Mb as far as I can recollect.

    I will look up part number this evening and update link.

    http://www.memoryc.com/transcend/ts256mdom40v.html


  • Registered Users Posts: 96 ✭✭kerrywez


    Hi lads and lasses, putting a new dom into the box will not help in any way if it is stuck on boot. If you are getting the above from putty then you got only one choice and that is to send the box back to OpenSat, in Portugal and have them repair it.

    For the benefit of all, here are the contact details for them Tel: +351 251 656 134 or their mail is info@azbox.com, they will send you out a RMA form to be filled in, you will need to print it off and fill it in and send it with the box. It took about 2 1/2 or 3 weeks to have mine back. They are very good to chat to and will help you lots.

    Very best wishes Wez


  • Advertisement
  • Registered Users Posts: 96 ✭✭kerrywez


    shinobi wrote: »
    I'm also stuck on booting, didn't try putty as neither AzUP nor Jazup could determine an IP address. PC went dulally whilst updating E2 using Jazup. I tried requesting help on AZBox E2 forum but to no avail. I was using Jazup to update software but apparantly your only ment to use azup. After much searching I came across a thread on satpimps which tells you how to recover a dead box. I've just purchased a USB to TTL interface on Ebay to connect up to the box and then follow the directions given in the post. I don't think I've much to lose eitherways.

    Hi fi the box has not booted then it will not be on the network and there will be no ip address for it, as there will not be any. See the above for the only way to sort out a box which is stuck in boot and which putty will not fix. Sad to say your only option is to send th box back to OpenSat and have them fix it for you. I would advise anyone who is going to send their box back to use a currier service as An Post have shot themselves in the foot with their prices, they charged me €44 to send the box back and all it cost to be returned to me, by currier, was €17. good luck to you all, it is not a dead box, just hard to wake, but OpenSat can wake it for you, then did not chars me anytime to repair the box, but it was still under warranty at the time.

    Very best wishes Wez


  • Registered Users Posts: 257 ✭✭jimmyjim11


    thanks wez was thinking as much,
    zboot (1) failed
    some guy got it fixed using jtag not for the faint hearted:eek:

    sent them a email yesterday waiting for them to get back

    no warranty do got mine on e bay


  • Registered Users Posts: 257 ✭✭jimmyjim11


    if u get this when you log on to putty you will be able to get box back :)
    xosPe0 serial#dc6afa7b4b92f3f4b52f6ded65230ac8 subid 0x50
    
    xenv cs2 ok
    
     xosPe0 serial#dc6afa7b4b92f3f4b52f6ded65230ac8 subid 0x5ok
    
    power supply: ok
    
    dram0 ok (8)
    
    dram1 ok (a)
    
    zboot (0) ok
    
    >
    


  • Registered Users, Registered Users 2 Posts: 447 ✭✭shinobi


    Box is out of warranty at this stage >1.5 yrs, so I'll wait for USB to Serial connector to arrive and I'll try connecting putty through the serial connection and I'll let you know how I get on. If that doesn't work I'll see where I might get the repair done. As I said previously, I don't have much to lose. Who knows, could be a blessing in disguise and I could end up buying a Vu+ Duo!:D


  • Registered Users Posts: 33 Cranium


    Sorry to hear about you AZBox troubles shinobi....

    Re: 'neither AzUP nor Jazup could determine an IP address.'

    If your AZBox is managing to talk to your router, if you go to the routers admin page, perhaps it can show you what's successfully connected and what IP address has been assigned.

    Cranium


  • Registered Users, Registered Users 2 Posts: 106 ✭✭Greenpiece


    Not looking too good then to make the leap to RTI Core V1.0 then. Just wondering if anybody has had success with it and if it is worth the trouble to break away from original firmware, which has yet to make V1.


  • Registered Users, Registered Users 2 Posts: 535 ✭✭✭tapfit2004


    Greenpiece wrote: »
    Not looking too good then to make the leap to RTI Core V1.0 then. Just wondering if anybody has had success with it and if it is worth the trouble to break away from original firmware, which has yet to make V1.

    most replies on official forum say it works well but it still has a few bugs, a bit like the original fw, but for general tv viewing it seems ok.


  • Registered Users, Registered Users 2 Posts: 447 ✭✭shinobi


    Followed thread from satpimps and successfully recovered box & I'm over the moon. Took approx 1Hr from start to finish. I'll retry E2 V1.0 Fix & update using AZUP. Used Jazup last time which may have caused me all the hassle, so will be sure to avoid this time round. Only slight glitch was connecting the serial. Tx on USB goes to Tx on AZ mobo & the same for Rx.


  • Registered Users, Registered Users 2 Posts: 535 ✭✭✭tapfit2004


    shinobi wrote: »
    Followed thread from satpimps and successfully recovered box & I'm over the moon. Took approx 1Hr from start to finish. I'll retry E2 V1.0 Fix & update using AZUP. Used Jazup last time which may have caused me all the hassle, so will be sure to avoid this time round. Only slight glitch was connecting the serial. Tx on USB goes to Tx on AZ mobo & the same for Rx.

    good to hear you got it going. The satpimps Azbox section has a lot of good info in it.

    The Rti forum is a strange setup. I tried to post a few times and it was held up for mod approval and then the post never appeared


  • Registered Users, Registered Users 2 Posts: 447 ✭✭shinobi


    tapfit2004 wrote: »
    good to hear you got it going. The satpimps Azbox section has a lot of good info in it.

    The Rti forum is a strange setup. I tried to post a few times and it was held up for mod approval and then the post never appeared

    I'll second that satpimps is the best for AZbox support. RTi forum is not much use for help, only useful for feedback to developers/programmers and also little or no plugin support either.


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 106 ✭✭Greenpiece


    My azbox is connected to a 1.2m dish on a diseqc rotor and I was wondering if it is possible to also connect it to a multiswitch using a 2x1diseqc switch. The multiswitch is connected to a fixed dish on 28E.

    It would save a few secs waiting for dish to swing back as I have only 1sat tuner along with a DTT tuner in the box which is a premium.
    I am using latest original firmware.


  • Registered Users, Registered Users 2 Posts: 915 ✭✭✭downwiththatsor


    Greenpiece wrote: »
    My azbox is connected to a 1.2m dish on a diseqc rotor and I was wondering if it is possible to also connect it to a multiswitch using a 2x1diseqc switch. The multiswitch is connected to a fixed dish on 28E.

    It would save a few secs waiting for dish to swing back as I have only 1sat tuner along with a DTT tuner in the box which is a premium.
    I am using latest original firmware.

    I got it to work as you will see in the last post here -http://www.boards.ie/vbulletin/showthread.php?p=69225304


  • Registered Users, Registered Users 2 Posts: 106 ✭✭Greenpiece


    I got it to work as you will see in the last post here -http://www.boards.ie/vbulletin/showthread.php?p=69225304

    Thanks for that, got it working as you described, with positioner setup off for 28E and diseqc set as 1.0 -LNB2 for multiswitch and diseqc set as 1.0 - LNB1 and positioner setup as Usals for rotor.


  • Registered Users, Registered Users 2 Posts: 535 ✭✭✭tapfit2004


    latest image is out, good reports from people who have tested it.

    copied from pimps site.
    To test: a compilation of drivers from various versions of E2 by RTi Team, plus a lot more - done by a Spanish team...

    download: http://www.multiupload.com/NU6TKA6TGQ

    I want to present from AZBOXHD.es this new project we have initiated a number of people using the system Enigma2.

    We have been breeding for several months the baby and I want to present the first BETA of this project which we hope will be well received and to allow all those people who are initiated into the world of Enigma2 his adaptation is as painless as possible.

    This image is not developed on any already published, has been compiled from zero puts the RTi GIT Team available around the world to create our images Enigma2. If it is true that we have replaced some things and used drivers that we believe best fit our image of different versions of RTi.

    What then are we detail a number of things we have built and programmed especially for our image, but of course some things are beyond us in the Changelog since it has been a lot of work done.

    We hope this image can be referenced in the Spanish landscape, especially since our image is dedicated to this community which is where we believe there is a lack of support, care, etc ...

    ================================= ==

    - Download mhw2 integrated EPG image would suffice to put a couple of minutes on a canal that contains the full EPG for it.
    - Added information of retransmissions in the EPG mhw2
    - Ability to copy the EPG channels mhw2 about others using a configuration file equivalents.
    - Added a plugin to configure the equivalence of EPG, schedule the download of EPG mhw2 daily and make an immediate download (the plugin takes care of changing the appropriate channel, wait the necessary time and return to previous channel).
    - Patch simpleload that displays the epg nothing but load it from the crossepg without restarting
    - New skin BlackModern_azboxHDv3
    - Improved display for the accents and ñ
    - New spaz menu (similar to OPENSAT) accessible by pressing the Home Menu
    - Similar to OPENSAT keymap
    - Plugin AzExplorer (file browser)
    - Plugin AzHelp Guide (explanation of the keys on the remote, apart from bringing a section of frequently asked questions)
    - Plugin InfoAz (Displays all of our AZBOX info)
    - Plugin Multiquickbutton
    - Plugin Networkbrowser with Spanish translation
    - Plugin Crossepg with Spanish translation
    - Translated into Spanish Cooltvguide Plugin
    - Plugin Mytube translated into Spanish.
    - Autoclock that solves the problems of time on the VFD when in Standby
    - Panel DescargasSPZ (Updates, Plugins, Channel List, Skins, etc ...)
    - Drivers hybrids (RC12 and 1.0)
    - Drivers experimental WiFi rt2870, RT3070.

    =================================

    We realize that in this first BETA bugs have apart from containing the RTi firm as it is the firm basis of the GIT compiled, so those errors generated by the RTi to us will be difficult to repair especially if drivers are subject and the like.

    We will be fixing the bugs that we detected and adding FIX's in the update system that we have included in the firm, so stay tuned. We will use this system as long as we believe that there is no need to make a new version, such as a huge improvement to come into the system in the next revision of the firm.

    To report bugs, translation errors, etc ... Bugtracker we enabled to do so.

    Link to Bugtracker:
    Code:
    http://www.azboxhd.es/foro/tracker/project-5-e2-spaze-team/
    You enjoy the picture;-)
    Atte. TEAM SPAZ


  • Registered Users, Registered Users 2 Posts: 447 ✭✭shinobi


    I'm trying out Spaze at the minute. So far seems much better than RTi core 1.0 fix, and it's only been released as a beta.
    Really nice release, Better on screen menus, Remote control is correctly keymapped - i.e. keys do what they say they do. Crossepg & Cool TV guide come preinstalled. Very little in the way of cogs & no green screens as of yet.
    Some issues occasionally with loss of sound, as before usually a channel up/down resolves this. Also Picons for Astra2 don't seem to work. I have DTT picons in same folder and they are working fine. Not too sure what the problem is but I have seen it already mentioned on sat pimps already.


  • Registered Users Posts: 257 ✭✭jimmyjim11


    Got my box back yesterday from opensat :) arrived there on the 20th ,
    down on RMA form was chip replaced.
    2 year warranty BTW


  • Registered Users, Registered Users 2 Posts: 447 ✭✭shinobi


    Found issue with channel & picon naming difference on SPAZE image & did a batch rename so picons would work & uploaded here. (Couldn't upload to boards due to filesize restriction). Also find attached DTT Picons which work on RTi V 1.0 or SPAZE.


  • Registered Users Posts: 257 ✭✭jimmyjim11


    Wher did you install picions shinobi ?

    Have mine in /media/cf and nothing :(


  • Registered Users, Registered Users 2 Posts: 447 ✭✭shinobi


    jimmyjim11 wrote: »
    Wher did you install picions shinobi ?

    Have mine in /media/cf and nothing :(

    I've them stored in /usr/share/enigma2/picon
    For Cool TV press Guide> Menu> press Blue button for guide and type this into picon path using the remote control.

    Slightly off topic but with this version, for the first time yet, RTÉ is now correctly displaying the É on the VFD.


  • Advertisement
  • Closed Accounts Posts: 3 PSUNG


    Hi all I am new here and was under the impression that the azbox hd (not hd plus) could only use one tuner.By reading this thread it seems that it can have two tuners (ie dvbs2 +dvb t) is this true? Will the azbox hd work with dvbs2 and dvb T ? and if so where would you recommend to buy a dvb T tuner? Thanks in advance.Psung


Advertisement