Manuals / Request a manual

lte · 16-01-2015 11:43pm

Hi all,

Am looking for the installation manual for a HKC 1070 - thanks in advance!

KoolKid · 16-01-2015 11:54pm

I PMed you that manual. I hope it helps. Any questions give us a shout.

lte · 17-01-2015 1:43am

Thanks KoolKid - appreciate it - late night Friday n'all!

KoolKid · 17-01-2015 7:46pm

Anytime.;)

currychip · 27-01-2015 8:42pm

Hello,

I'm looking for the installation manual/engineers manual for a HKC SW1070.
Thank you.

KoolKid · 27-01-2015 10:03pm

PMed you that manual.
If you need any help give us a shout.

currychip · 27-01-2015 10:15pm

Thanks KoolKid, much appreciated.

Mcus · 28-01-2015 5:59pm

Hi, drilling near the alarm panel managed to set off alarm, entered code to knock it off but now display shows tb and won't let me arm the alarm, what can I do to remove this error, and would it be possible to get a copy of the manual please? Many thanks.

KoolKid · 28-01-2015 6:44pm

TB is tamper bell. Possibly you disturbed a loose connection in the panel. Check the BHO and tamper return connections.
I'll PM you the manual.

Mcus · 29-01-2015 5:33pm

Thanks for that KoolKid, nothing like a little light reading!

KoolKid · 29-01-2015 10:41pm

Enjoy.
If you need any help give us a shout.

isthis1used · 31-01-2015 1:26pm

Howdy all
Looking for an installation manual for an astec 63dv alarm that my parents have. Going off previous posts here, koolkid seems to be the one to ask so if you don't mind koolkid could I pm you my email for a copy?

altor · 31-01-2015 1:41pm

isthis1used wrote: »

Howdy all
Looking for an installation manual for an astec 63dv alarm that my parents have. Going off previous posts here, koolkid seems to be the one to ask so if you don't mind koolkid could I pm you my email for a copy?

Sent you that by P.M.

isthis1used · 31-01-2015 1:53pm

altor wrote: »

Sent you that by P.M.

Perfect. Thanks a mil.

altor · 31-01-2015 1:55pm

isthis1used wrote: »

Perfect. Thanks a mil.

No probs

The Sidewards Man · 01-02-2015 4:05am

Looking for manual and engineer code for hkc, thanks.

The Sidewards Man · 01-02-2015 4:21am

Model number is HKC GSM Q, thanks.

KoolKid · 01-02-2015 11:10am

I sent you a PM with that manual. If you need any help give us a shout.

Eimhin2014 · 08-02-2015 11:25am

Hi Koolkid,

Can you send me on the engineers manual for the astec 63 alram.

Eimhin2014 · 08-02-2015 11:48am

Hi could you send on a copy of the engineer manual please?

KoolKid · 08-02-2015 2:33pm

I PMed you that manual.
If you need any help give us a shout.

KoolKid · 08-02-2015 2:34pm

PMed you that.:)

johnjhurley · 12-02-2015 12:42am

altor wrote: »

Sent you the manual by P. M.

Hi Altor,
Can you send me installation manual for the HKC securewatch 8/12 also please.
Thanks
John

altor · 12-02-2015 12:43am

johnjhurley wrote: »

Hi Altor,
Can you send me installation manual for the HKC securewatch 8/12 also please.
Thanks
John

No problem, sent by P.M.

williemac1 · 17-02-2015 2:57pm

hi

Can someone please send me the engineer manual for the Astec 63DV alarm?

I keep getting faults in a zone, is there an easy way to locate which contact is causing the fault in that zone?

Thanks

altor · 17-02-2015 3:27pm

williemac1 wrote: »

hi

Can someone please send me the engineer manual for the Astec 63DV alarm?

I keep getting faults in a zone, is there an easy way to locate which contact is causing the fault in that zone?

Thanks

Sent you that by P.M.

If you keep getting faults in the zone you have a faulty device or devices on that zone. You will need a multimeter to check this.

Remove the resistor from the last device on the zone and connect the wires to the last device.
Sometimes the resistor is in the control panel so just remove this and connect the cable ends from that zone to the multimeter.
Set the meter to 200 Ohms and take a note of the reading.
Each device you have on that zone you will need to tap 10-20 times plus open and close each contact one by one. If you do connect the meter in series with the last device then make sure you disconnect the zone in the control panel plus any resistors on the loop and join the cable together there.
After each one, check if the reading has changed.
If it does not return to in or around the same value remove that device, join the cables from the alarm circuit together and move on to the next device.
After this you should have a circuit with a lower resistance value that remains the same after you tap or open any device.
Replace any faulty devices plus replace the EOL resistor and rewire the zone back into the panel.

With Astec, a global sensor will work as a replacement.

Davyhallam · 18-02-2015 7:48pm

Hi All, Does any body have a link to installation manual for HKC quantum 70 .Many Thanks in advance.
Davyhallam

KoolKid · 18-02-2015 8:03pm

I PMed you that manual.

Davyhallam · 18-02-2015 8:07pm

Many Thanks , KooLKid

KoolKid · 18-02-2015 8:13pm

Your welcome. Any bother give us a shout.

zefer · 19-02-2015 12:27pm

Could i get a copy of engineers manual please? Thanks in advance

KoolKid · 19-02-2015 12:38pm

PMed you that.

Hammertime · 23-02-2015 9:18pm

Hi all,

just starting to install a wireless HKC 1070 alarm. Think I'm on the right track but instructions are poor. Could I get a copy of the engineers manual from someone.
Thanks in advance for any help.

altor · 23-02-2015 9:19pm

Hammertime wrote: »

Hi all,

just starting to install a wireless HKC 1070 alarm. Think I'm on the right track but instructions are poor. Could I get a copy of the engineers manual from someone.
Thanks in advance for any help.

Sent you that by P.M.

Hammertime · 23-02-2015 9:29pm

Quicker than an alarm activation,

Cheers Mate

altor · 23-02-2015 9:31pm

Hammertime wrote: »

Quicker than an alarm activation,

Cheers Mate

Hahaha thats no problem

Millford · 24-02-2015 10:05am

Hi All!

Could anyone help me with a copy of the engineer/installation manual for the Aritech CD 34

Thanks a mil!

altor · 24-02-2015 10:55am

Millford wrote: »

Hi All!

Could anyone help me with a copy of the engineer/installation manual for the Aritech CD 34

Thanks a mil!

Sent you that by P.M.

Hammertime · 24-02-2015 4:42pm

altor wrote: »

Hahaha thats no problem

sorry to bother you again, do you have the manual for a HKC 1070 wired alarm. I have 3 wired devices on my system, the SABB, internal echo and a wired PIR. Just looking for directions on adding them. Thanks for your help.

KoolKid · 24-02-2015 8:58pm

I sent you that manual. I hope it helps.

AlanG · 26-02-2015 1:47pm

Hi,
I would really appreciate the engineer / installer guide for a LightSYS 2 system if anyone could PM me.
Thanks.

markad1 · 26-02-2015 1:57pm

Would anyone have the manual for a MET-LOK keypad please

KoolKid · 26-02-2015 7:34pm

AlanG wrote: »

Hi,
I would really appreciate the engineer / installer guide for a LightSYS 2 system if anyone could PM me.
Thanks.

I PMed you those manuals.
If you need any help with it give us a shout.

HighFlyR · 01-03-2015 10:37pm

Hi
I am having problems with my scopetronic homeguard. T6 is being displayed. The alarm box I am using is a hkc with a resistor in the box and none in the panel but I am still getting the error. Think I have tried everything so thought I would ask you guys.
Failing getting this problem solved I was thinking of getting a new hkc panel.
Would anyone have a engineers/ programming manual so I could have a idea of what I would be getting myself in for. Or does anyone know of a panel similar to the homeguard to instal.
Oh just one last thing. Is the resistor in the new alarm box of higher or lower ohms to the 470ohm that was required in the system and would this be causing the problem?
Thanks.

altor · 01-03-2015 10:39pm

HighFlyR wrote: »

Hi
I am having problems with my scopetronic homeguard. T6 is being displayed. The alarm box I am using is a hkc with a resistor in the box and none in the panel but I am still getting the error. Think I have tried everything so thought I would ask you guys.
Failing getting this problem solved I was thinking of getting a new hkc panel.
Would anyone have a engineers/ programming manual so I could have a idea of what I would be getting myself in for. Or does anyone know of a panel similar to the homeguard to instal.
Oh just one last thing. Is the resistor in the new alarm box of higher or lower ohms to the 470ohm that was required in the system and would this be causing the problem?
Thanks.

I would say its T6. That is the tamper on the bell box.
Sent you the manual by P.M.

KoolKid · 02-03-2015 8:42am

Tamper bell on the home guard is tb. I would say that's what you are seeing. If you look at the manual sent to you it shows all the error messages together.

altor · 02-03-2015 10:12pm

HighFlyR wrote: »

Hi
I am having problems with my scopetronic homeguard. T6 is being displayed. The alarm box I am using is a hkc with a resistor in the box and none in the panel but I am still getting the error. Think I have tried everything so thought I would ask you guys.
Failing getting this problem solved I was thinking of getting a new hkc panel.
Would anyone have a engineers/ programming manual so I could have a idea of what I would be getting myself in for. Or does anyone know of a panel similar to the homeguard to instal.
Oh just one last thing. Is the resistor in the new alarm box of higher or lower ohms to the 470ohm that was required in the system and would this be causing the problem?
Thanks.

altor wrote: »

I would say its T6. That is the tamper on the bell box.
Sent you the manual by P.M.

My apologies HighFlyR, I wrote T6 instead of TB.
I hope my explanation regarding the fault helped.

Davagon · 08-03-2015 10:08pm

Looking for engineers manual for my astec 63d , can't find it anywhere,any help where to get one greatly appreciated.

KoolKid · 08-03-2015 11:04pm

I PMed you that manual. I hope it helps.

Davagon · 08-03-2015 11:19pm

Talk about service with smile, thanks a mill koolkid, some bed time reading.

Manuals / Request a manual

Comments