Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Mux 2 Launched / Saorview Rescan Required

24567…26

Comments

  • #52
    zg3409
    Registered Users, Registered Users 2 Posts: 6,874 ✭✭✭zg3409


    dublinman1990 wrote: »
    But I only got four TV channels with none from the radio on the Laurus LR-785XB Box from Tesco (I haven't a clue what to do with that one because this receiver I have at home might be faulty).

    I was unlucky in looking up the Laurus website for attempting to find a firmware download as I might have to email someone to get the updates which is a stupid decision really.

    http://www.laurusdigital.ie/

    info@laurusdigital.ie

    Do I need to another rescan of Mux2 on the two boxes or is that all that is required for the moment. My nearest transmitter is Three Rock. Thanks.

    Best to scan again after 3pm. It is unlikely any box will fail to work at all with Mux 2. If it fails to pick up try a manual scan. Try a factory reset too.The signal might just be a little weaker and so an automatic scan might not pick it up.

    By the way the laurus digital box looks like it is made by vestel. If you are having major problems, that laurus cannot solve, it may be possible to find which exact vestel model you have, and use firmware from another brand name designed for this exact hardware.


  • #53
    12 element
    Registered Users, Registered Users 2 Posts: 719 ✭✭✭12 element


    The Cush wrote: »
    After 3pm

    There is a fault with the transmitter. Engineer on the way apparently.


  • #54
    glimmerman123
    Registered Users, Registered Users 2 Posts: 492 ✭✭glimmerman123


    I thought RTE 2 HD was supposed to be moved to MUX 2 or has this idea been scrapped.


  • #55
    mike65
    Closed Accounts Posts: 88,972 ✭✭✭✭mike65


    The Cush wrote: »
    What TV is it?
    Is it installed with Ireland as the country/region?
    Maybe do a factory reset.

    Samsung and the Ireland option is selected. The radio channels come before the TV at the moment.


  • #56
    Souriau
    Registered Users, Registered Users 2 Posts: 788 ✭✭✭Souriau


    Tesco Freeview HD STB had automatically updated the new channels, it have stripped away RTE1 and RTEjr / RTE1+1 from Mux 1 on my STB and place the replacement from Mux2 in the same location.
    Also, RTE1 HD is transmitting in MEPG-4-SD, according to the STB.
    No wonder RTEjr is using more bandwidth as RTE1 HD is not transmitting HD


  • #57
    dublinman1990
    Registered Users, Registered Users 2 Posts: 8,526 ✭✭✭dublinman1990


    zg3409 wrote: »
    Best to scan again after 3pm. It is unlikely any box will fail to work at all with Mux 2. If it fails to pick up try a manual scan. Try a factory reset too.The signal might just be a little weaker and so an automatic scan might not pick it up.

    By the way the laurus digital box looks like it is made by vestel. If you are having major problems, that laurus cannot solve, it may be possible to find which exact vestel model you have, and use firmware from another brand name designed for this exact hardware.

    Alright. I did look up the vestel website to get a look at the STB's & I found nothing in terms of no images or information of them uploaded on their site.

    http://www.vestel.com/hd-dvb-t-t2

    I am using a Apple EMAC from April 2006 with CS3 software which I think is a pain when trying to navigate around the site. Vestel could be sold out of the equipment altogether or it could be a fault in the website. Who knows!

    It looks like to I have to email Vestel to see if I can get anywhere with them if all else fails. Although; I did send an email to the team at Laurus to see if I can get a response from them soon.

    I badly need to get these updates because not of the apparent problems of the Laurus receiver with Mux2. I also cannot get proper access to the menu's, Digital Aertel text and other features like zooming the TV in/out, recording & AD language.


  • #58
    zg3409
    Registered Users, Registered Users 2 Posts: 6,874 ✭✭✭zg3409


    dublinman1990 wrote: »
    I badly need to get these updates because not of the apparent problems of the receiver with Mux2. I also cannot get proper access to the menu's, Digital Aertel text and other features like zooming the TV in/out, recording & AD language.

    You should wait until after 3pm and then re-try with a factory reset and manual scan. The box may be OK. Then your first port of call should be Laurus. If they are not replying to your emails then try ring them on 1890 989 975. They might be busy today with others contacting them.

    If you are really stuck and never get a response, have a look at the model number on the bottom. It is vitally important any software you install is designed for that model. Otherwise it may never work again. If the model number is the same as some Walker models, then a Walker firmware may work:
    http://www.walker.ie/products/products.html
    http://www.walker.ie/pages/downloadManuals2.php

    If your receiver is Saorview only it may be similar to WP645TS-HD or WP12DTB-R


  • #59
    The Cush
    Registered Users, Registered Users 2 Posts: 15,636 ✭✭✭✭The Cush


    Souriau wrote: »
    No EIT for RTE1, RTEjr and RTE1+1 on Mux 1, so I guess these channels are hidden on Saorview approved certified and Ireland setting TV and STB.

    No, they are not hidden like LCNs 12-15. They are the SD simulcast versions of the channels you mention on LCNs 11, 17 and 18, they should be around for the next 2 to 3 weeks.


  • #60
    STB
    Closed Accounts Posts: 5,178 ✭✭✭STB


    dublinman1990 wrote: »
    Alright. I did look up the vestel website to get a look at the STB's & I found nothing in terms of no images or information of them uploaded on their site.

    http://www.vestel.com/hd-dvb-t-t2

    I am using a Apple EMAC from April 2006 with CS3 software which I think is a pain when trying to navigate around the site. Vestel could be sold out of the equipment altogether or it could be a fault in the website. Who knows!

    It looks like to I have to email Vestel to see if I can get anywhere with them if all else fails. Although; I did send an email to the team at Laurus to see if I can get a response from them soon.

    I badly need to get these updates because not of the apparent problems of the Laurus receiver with Mux2. I also cannot get proper access to the menu's, Digital Aertel text and other features like zooming the TV in/out, recording & AD language.

    Whic one ? http://www.saorview.ie/product/laurus/

    Are these issues all of a sudden ?

    Dont even dream of loading Walker firmware onto it. I am not sure that there isnt bootloader protection on these various rebrands.


  • Advertisement
  • #61
    Machinehead
    Registered Users, Registered Users 2 Posts: 732 ✭✭✭Machinehead


    Souriau wrote: »
    It's strange to see RTEjr is using more bandwidth than RTE1 HD on Mux 2
    RTEjr using 21% of Mux capaticy, RTE1HD using 17%

    EIT info now for RTE1, RTEjr and RTE1+1 on Mux 2

    No EIT for RTE1, RTEjr and RTE1+1 on Mux 1, so I guess these channels are hidden on Saorview approved certified and Ireland setting TV and STB.

    Interesting info re RTÉ One HD. I don't know how you find this info, so could you keep us updated on the bandwith used by RTÉ One HD vs RTÉjr as things move on.


  • #62
    The Cush
    Registered Users, Registered Users 2 Posts: 15,636 ✭✭✭✭The Cush


    Souriau wrote: »
    Also, RTE1 HD is transmitting in MEPG-4-SD, according to the STB.

    It's identified as 1080i HD on my TVs.


  • #63
    The Cush
    Registered Users, Registered Users 2 Posts: 15,636 ✭✭✭✭The Cush


    Machinehead wrote: »
    I don't know how you find this info, so could you keep us updated on the bandwith used by RTÉ One HD vs RTÉjr as things move on.

    http://www.boards.ie/vbulletin/showthread.php?t=2057059983


  • #64
    Machinehead
    Registered Users, Registered Users 2 Posts: 732 ✭✭✭Machinehead


    The Cush wrote: »
    It's identified as 1080i HD on my TVs.
    Same here on my Panny D25 RTÉ One (HD?) is showing as 1080i 50Hz.


  • #65
    irishfeen
    Registered Users Posts: 8,061 ✭✭✭irishfeen


    I wonder is the DOG permanently gone from RTÉ One?... it would be brilliant if it is - I have my doubts though.


  • #66
    The Cush
    Registered Users, Registered Users 2 Posts: 15,636 ✭✭✭✭The Cush


    mike65 wrote: »
    Samsung and the Ireland option is selected. The radio channels come before the TV at the moment.

    How old is the TV, non Saorview approved?


  • Advertisement
  • #67
    STB
    Closed Accounts Posts: 5,178 ✭✭✭STB


    Souriau wrote: »
    It's strange to see RTEjr is using more bandwidth than RTE1 HD on Mux 2
    RTEjr using 21% of Mux capaticy, RTE1HD using 17%

    EIT info now for RTE1, RTEjr and RTE1+1 on Mux 2

    No EIT for RTE1, RTEjr and RTE1+1 on Mux 1, so I guess these channels are hidden on Saorview approved certified and Ireland setting TV and STB.
    The Cush wrote: »
    It's identified as 1080i HD on my TVs.

    Regardless of what encoder is being used, its the bit rate that dictates what percentage of the Mux is being used by what channel.

    Mux 1 was a stat Mux meaning that weight was given to RTE2HD when HD content was being broadcast.

    What DVB analyser are you using, Souriau ? Publish the avg bit rates for the channels, if you can.
    mike65 wrote: »
    Samsung and the Ireland option is selected. The radio channels come before the TV at the moment.

    There is an option to manual change the logical channel numbering on the Samsungs Mike (Source, Menu, Edit My Channels or the like off the top of my head).


  • #68
    dublinman1990
    Registered Users, Registered Users 2 Posts: 8,526 ✭✭✭dublinman1990


    STB wrote: »
    Whic one ? http://www.saorview.ie/product/laurus/

    Are these issues all of a sudden ?

    Dont even dream of loading Walker firmware onto it. I am not sure that there isnt bootloader protection on these various rebrands.

    The box I am enquiring about is the Laurus LR785-XB model.

    I cannot upload the teletext, menus or AD up on screen and it hasn't done so for over a year. It is nuts that is has to act up in this manner in which the updates for this equipment seems apparently to be lacking in quantity & quality.

    From the text I have quoted in bold above; can I ask (nicely) have you or anyone else here on boards ever attempted to download walker software on this receiver before? If so; Have you any evidence to suggest that it has not worked out at all?

    It seems adequate so far that I have emailed Laurus to get somewhere for now. If not; what else can you advise me to do if everything else has failed?


  • #69
    mike65
    Closed Accounts Posts: 88,972 ✭✭✭✭mike65


    The Cush wrote: »
    How old is the TV, non Saorview approved?

    Its just pre SAORVIEW approved.
    STB wrote: »
    There is an option to manual change the logical channel numbering on the Samsungs Mike (Source, Menu, Edit My Channels or the like off the top of my head).

    Just turned it on again and its now ordered correctly :) RTE HD first, RTE SD second and then radio.

    Now for er rest of them....


  • #70
    The Cush
    Registered Users, Registered Users 2 Posts: 15,636 ✭✭✭✭The Cush


    Did a retune on a Lidl Silvercrest TV from Mullaghanish and I noticed that Mux 2 is described as "RTÉNL 1" and Mux 1 as "RTÉNL 2". I wonder if all of RTÉ's services will eventually move over to Mux2/RTÉNL 1 with the other services remaining on Mux1/RTÉNL 2?

    Also noticed on various TVs the signal strength of Mux2 is slightly better/higher than Mux1. Tried to retune my Walker PVR this morning but it's not storing any channels from Mux2 and gets a poor signal. The aerial has a masthead amp from analogue days so I'm assuming that as the PVR is the first receiver in the chain it's overloading the tuner for Mux 2. Will have to get the ladder out later to turn down the gain for now. Maybe remove it and the VHF aerial eventually, doesn't look like they're launching a VHF mux for now :D.


  • #71
    Elmo
    Registered Users, Registered Users 2 Posts: 23,641 ✭✭✭✭Elmo


    pa990 wrote: »
    When is Mux2 due to nationwide?

    21 October 2013

    Shouldn't the muxes be renamed 2RN1 and 2RN2


  • Advertisement
  • #72
    STB
    Closed Accounts Posts: 5,178 ✭✭✭STB


    dublinman1990 wrote: »
    The box I am enquiring about is the Laurus LR785-XB model.

    I cannot upload the teletext, menus or AD up on screen and it hasn't done so for over a year. It is nuts that is has to act up in this manner in which the updates for this equipment seems apparently to be lacking in quantity & quality.

    From the text I have quoted in bold above; can I ask (nicely) have you or anyone else here on boards ever attempted to download walker software on this receiver before? If so; Have you any evidence to suggest that it has not worked out at all?

    It seems adequate so far that I have emailed Laurus to get somewhere for now. If not; what else can you advise me to do if everything else has failed?

    Most if not all firmware updates are done ota (over the air) which means you have to do nothing, the box updates itself.

    But there are firmware definition files for Walkers out there. But there are different firmware definitions for different chassis types. Presently there is one OTA for Walker on the SSU carrier. That will only force itself to the relevant boxes, over the air.

    No. I would not suggest you try any Walker fiirmware via USB as you could brick your box. I have no doubt that the same chassis firmware will work (there may not be a bootloader block on given they are rebrands) if the harware is the same.


  • #73
    Rick_
    Registered Users, Registered Users 2 Posts: 2,611 ✭✭✭Rick_


    My Samsung TV was giving 100% signal strength and quality for MUX 2. I think it was only 90% for MUX 1.

    And to think, this time last year we were all going mad getting ready for DSO and only having one MUX to contend with!


  • #74
    Souriau
    Registered Users, Registered Users 2 Posts: 788 ✭✭✭Souriau


    The Cush wrote: »
    It's identified as 1080i HD on my TVs.
    I will check later when the official time to rescan at 3pm onward
    Here is the info on the Tesco Freeview HD screen

    second photo taken after 3pm and the info change to HD


  • #75
    Sam Russell
    Moderators, Science, Health & Environment Moderators Posts: 19,862 Mod ✭✭✭✭Sam Russell


    Tony wrote: »
    Seems strange to have RTE 1 HD on a separate MUX to RTE 2 HD as this will limit the ability to record one channel while watching another for the majority of boxes that have just one terrestrial tuner.

    I would think this is only a temporary arangement simillar to the RTE 2 HD simulcast they had when it started broadcasting in HD.

    It looks like they will have four HD channels, two on each mux.


  • #76
    Sam Russell
    Moderators, Science, Health & Environment Moderators Posts: 19,862 Mod ✭✭✭✭Sam Russell


    Paddy C wrote: »
    My Samsung TV was giving 100% signal strength and quality for MUX 2. I think it was only 90% for MUX 1.

    And to think, this time last year we were all going mad getting ready for DSO and only having one MUX to contend with!

    Think how excited we all got three years ago when Mux 1 went 100% on, end of test mode. Oct 2010 - soft launch of DTT. Promptly followed by TV3's exit from the signal, and a few weeks of petulance.

    .


  • #77
    The Cush
    Registered Users, Registered Users 2 Posts: 15,636 ✭✭✭✭The Cush


    Souriau wrote: »
    I will check later when the official time to rescan at 3pm onward
    Here is the info on the Tesco Freeview HD screen

    Can you post the TS data for Mux1 and 2?


  • #78
    glimmerman123
    Registered Users, Registered Users 2 Posts: 492 ✭✭glimmerman123


    It's been a long road guys but finally mux 2 has officially launched. Look forward to the launch of mux 3 over the next ten years. :D


  • #79
    Ronnie Raygun
    Closed Accounts Posts: 1,351 ✭✭✭Ronnie Raygun


    dublinman1990 wrote: »
    The box I am enquiring about is the Laurus LR785-XB model.

    I cannot upload the teletext, menus or AD up on screen and it hasn't done so for over a year. It is nuts that is has to act up in this manner ...

    If not; what else can you advise me to do if everything else has failed?

    Is this the same box you were on about here? http://www.boards.ie/vbulletin/showthread.php?t=2056589266

    Never worked right since you got it? I think you should have heeded the advice given in that old thread & brought it back to Tesco.


  • #80
    The Cush
    Registered Users, Registered Users 2 Posts: 15,636 ✭✭✭✭The Cush


    The Cush wrote: »
    Also noticed on various TVs the signal strength of Mux2 is slightly better/higher than Mux1. Tried to retune my Walker PVR this morning but it's not storing any channels from Mux2 and gets a poor signal. The aerial has a masthead amp from analogue days so I'm assuming that as the PVR is the first receiver in the chain it's overloading the tuner for Mux 2. Will have to get the ladder out later to turn down the gain for now.

    Got the ladder out and checked, gain was already down to end. Decided to do a retune at the last TV point in the chain, all channels from Mux1 & 2 stored normally. Reinstalled it back at the main TV and all working OK.

    Before I did the retune at the second TV point I checked the signal strength and it was ranging from max SS to poor signal.

    Checked my brothers LG and Mux1 has a SS of 74% for Mux1 and 78% for Mux2.


  • #81
    The Cush
    Registered Users, Registered Users 2 Posts: 15,636 ✭✭✭✭The Cush


    From the TV3 website
    A public information campaign on TV, Radio and Online will be in place from October 21st, for two weeks, encouraging SAORVIEW viewers to re-scan their equipment. Re-scan guides and instructions are available on the SAORVIEW website and consumers can avail of additional customer support by contacting the Saorview Helpline (1890-222 012) or by emailing info@saorview.ie.

    http://www.tv3.ie/entertainment_article.php?locID=1.803.813&article=116606


  • Advertisement
  • #82
    muincav
    Registered Users, Registered Users 2 Posts: 810 ✭✭✭muincav


    Have NO channels at all now...rescanned several times and Got some back but all gone and none coming in on rescan....had most of the UK freeview channels too but nothing now....:mad:


  • #83
    zg3409
    Registered Users, Registered Users 2 Posts: 6,874 ✭✭✭zg3409


    muincav wrote: »
    Have NO channels at all now...rescanned several times and Got some back but all gone and none coming in on rescan....had most of the UK freeview channels too but nothing now....:mad:

    You should still get the Mux 1 (TV3 etc) if the scan is working right, as Mux1 did not really change in terms of frequency for most people.

    If you were getting UK freeview, and the frequency was on a nearby Mux2 frequency, then you may get neither as one service is blocking the other. Depending on where you live your aerial may be optomised for Freeview over Saorview. Try a factory reset, automatic scan and then a manual scan if you know which site you received from before. If all else fails you might need a specialist to repoint the aerial, but freeview may no longer be possible from where you live. :(


  • #84
    Mr Cumulonimbus
    Closed Accounts Posts: 1,463 ✭✭✭Mr Cumulonimbus


    The Cush wrote: »
    I wonder if all of RTÉ's services will eventually move over to Mux2/RTÉNL 1 with the other services remaining on Mux1/RTÉNL 2?

    Yes, thinking about this too. What is the final configuration going to be for this current retune? RTE1 HD on Mux 2 with RTE2 HD remaining on Mux 1 for now with further retunes necessary? Where will TG4 HD be, plus what will TV3 do?

    Retune message from RTE1 SD EPG info on Mux 1:

    276979.jpg


  • #85
    Jpmarn
    Registered Users, Registered Users 2 Posts: 1,484 ✭✭✭Jpmarn


    Is there any notion of rolling out Dolby Digital 5.1 sound in the near future. They can do it immediately on rte one HD and put on rte two when the old sd channels go off the air in about 2 weeks time.


  • #86
    lgs 4
    Registered Users Posts: 666 ✭✭✭lgs 4


    information bar on stating RTE 1 IN HD


  • #87
    Fresh Pots
    Closed Accounts Posts: 4,234 ✭✭✭Fresh Pots


    lgs 4 wrote: »
    information bar on stating RTE 1 IN HD

    Upscaled though I assume is it?


  • #88
    irishfeen
    Registered Users Posts: 8,061 ✭✭✭irishfeen


    Anyone know what bit-rate RTÉ One HD is running at?


  • #89
    Mr. Rabbit
    Registered Users Posts: 778 ✭✭✭Mr. Rabbit


    glimmerman123 wrote: »
    It's been a long road guys but finally mux 2 has officially launched. Look forward to the launch of mux 3 over the next ten years. :D

    That's nothing.

    I can get Mux 1, Mux 2, and......the NI mux from two different locations.

    So there :D

    RTE everywhere...........


  • #90
    The Cush
    Registered Users, Registered Users 2 Posts: 15,636 ✭✭✭✭The Cush


    irishfeen wrote: »
    Anyone know what bit-rate RTÉ One HD is running at?

    http://www.boards.ie/vbulletin/showthread.php?t=2057059983

    Not sure of the bitrate but according to Souriau's post RTÉ1 HD is using less capacity than RTÉjr.


  • Advertisement
  • #91
    Souriau
    Registered Users, Registered Users 2 Posts: 788 ✭✭✭Souriau


    irishfeen wrote: »
    Anyone know what bit-rate RTÉ One HD is running at?
    RTE1HD 4mbps 17% of Mux 2 capaticy
    RTEjr 6.8mbps 21% of Mux 2 capaticy

    RTE2HD 6mbps 15- 25% of Mux 1 capaticy


  • #92
    irishfeen
    Registered Users Posts: 8,061 ✭✭✭irishfeen


    Souriau wrote: »
    4mbps
    That's relatively low so, I wonder should we expect an increase over time? ... (RTÉ Two HD on satellite is running at 12mbps and around 6-8 on Mux 1?.. from what I remember)


  • #93
    The Cush
    Registered Users, Registered Users 2 Posts: 15,636 ✭✭✭✭The Cush


    irishfeen wrote: »
    That's relatively low so, I wonder should we expect an increase over time? ... (RTÉ Two HD on satellite is running at 12mbps and around 6-8 on Mux 1?.. from what I remember)

    Better bitrate than RTÉ1 SD at least. According to Saorview's Brian Geraghty this morning RTÉ1 HD is coming in the new year so this configuration may only be temporary.

    I remember when the Magners League Final was broadcast in HD back in May 2011 the bitrate was reported here as up to approx. 10Mbps.


  • #94
    irishfeen
    Registered Users Posts: 8,061 ✭✭✭irishfeen


    The Cush wrote: »
    Better bitrate than RTÉ1 SD at least. According to Saorview's Brian Geraghty this morning RTÉ1 HD is coming in the new year so this configuration may only be temporary.

    I remember when the Magners League Final was broadcast in HD back in May 2011 the bitrate was reported here as up to approx. 10Mbps.
    Oh yeah definitely, looks a lot better on the eye then SD. Yeah I remember that Magners League Final ... was amazing quality - it was if i'm not mistaken on the same day as the Champions League Final but that ended up being upscaled. I suppose we will see it launch on all platforms at that stage and Saorview is probably being used as a testing service.


  • #95
    The Cush
    Registered Users, Registered Users 2 Posts: 15,636 ✭✭✭✭The Cush


    irishfeen wrote: »
    Yeah I remember that Magners League Final ... was amazing quality - it was if i'm not mistaken on the same day as the Champions League Final but that ended up being upscaled.

    Not forgetting the Cork vs Tipperary hurling match from Thurles the following day.


  • #96
    Digifriendly
    Registered Users, Registered Users 2 Posts: 4,056 ✭✭✭Digifriendly


    RTE1 HD appearing on EPG 820 for me after rescan so I've deleted RTE1SD on 801 and replaced it with RTE2HD. No other new channels have appeared for me except a Test Card.


  • Advertisement
  • #97
    My name is URL
    Registered Users, Registered Users 2 Posts: 25,069 ✭✭✭✭My name is URL


    I just rescanned there and now have a few 'blank' stations and others telling me a rescan is required. Anyone know what the story is?

    I'm in mid-Louth fwiw


  • #98
    The Cush
    Registered Users, Registered Users 2 Posts: 15,636 ✭✭✭✭The Cush


    Digifriendly wrote: »
    RTE1 HD appearing on EPG 820 for me after rescan so I've deleted RTE1SD on 801 and replaced it with RTE2HD. No other new channels have appeared for me except a Test Card.

    2 other channels moved over to Mux 2 today RTÉjr and RTÉ1 +1, the Mux1 versions are still there for the next 2 or 3 weeks but without any epg data or channel names. There are a number of test cards also.

    Multiplex 1
    LCN
    |
    Channel
    |
    11|no channel name (RTÉ 1 simulcast)|SD
    02|RTÉ Two|HD
    03|TV3|SD
    04|TG4|SD
    05|3e|SD
    06|RTÉ News Now|SD
    17|no channel name (RTÉjr simulcast)|SD
    18|no channel name (RTÉ1 +1 simulcast)|SD
    200|RTÉ Radio 1|
    201|RTÉ Radio 1 Extra|
    202|RTÉ 2FM|
    203|RTÉ Lyric FM|
    204|RTÉ Raidió na Gaeltachta|
    205|RTÉ Pulse|
    206|RTÉ 2XM|
    207|(not used**)|
    208|RTÉ Gold|
    209|RTÉ Junior/RTÉ Chill|
    ** previously RTÉ Choice

    Multiplex 2
    LCN
    |
    Channel
    |
    01|RTÉ One|HD
    12|(no channel name***)|HD
    13|(no channel name/testcard)|SD - RTÉ Lyric FM audio
    14|(no channel name***)|HD
    15|(no channel name/testcard)|SD - RTÉ Raidió na Gaeltachta audio
    16|(not used)|
    07|RTÉjr*|SD
    08|RTÉ One +1*|SD
    211-212|(no radio channel names)|no audio
    213|(no radio channel name)|RTÉ Lyric FM audio
    214|(no radio channel name)|RTÉ Raidió na Gaeltachta audio
    215-217|(no radio channel names)|no audio
    218-219|(no radio channel name)|RTÉ Gold audio
    220|(no radio channel name)|no audio
    * RTÉjr 0700-1845 approx / RTÉ One +1 1900-0100/0200 approx
    ***No HD testcards on LCNs 12 and 14 this morning


  • #99
    The Cush
    Registered Users, Registered Users 2 Posts: 15,636 ✭✭✭✭The Cush


    My name is URL wrote: »
    I just rescanned there and now have a few 'blank' stations and others telling me a rescan is required. Anyone know what the story is?

    Is the Tv set to UK or Ireland? If set to Ireland all the channels with be stored in their new correct positions after a rescan.


  • #100
    Mr Cumulonimbus
    Closed Accounts Posts: 1,463 ✭✭✭Mr Cumulonimbus


    My name is URL wrote: »
    I just rescanned there and now have a few 'blank' stations and others telling me a rescan is required. Anyone know what the story is?

    I'm in mid-Louth fwiw

    If you are getting your reception from Clermont Carn, RTE 1 HD is on UHF ch 56 (754 Mhz), plus RTEjr and RTE 1+1 have moved there too.

    These channels are still on 52 (722 Mhz) but have no EPG info and eventually will be removed. RTE1 is in SD on 52.


  • #101
    Mearings
    Registered Users Posts: 559 ✭✭✭Mearings


    My name is URL wrote: »
    I just rescanned there and now have a few 'blank' stations and others telling me a rescan is required. Anyone know what the story is?

    I'm in mid-Louth fwiw

    Three Rock transmitter.
    Techwood 19911lcdhd tv.

    I retuned & RTE 1 (channel 33) automatically became preset 1.
    RTE 1 (channel 30) is now 11


  • Advertisement
Advertisement