Photos of your Airsoft equipment.(NO DISCUSSION)

Fitted the Aim Sports flashlight from Evike to the Kriss!



Side view with silencer adapter.



With silencer.




PDR-c with mini silencer (doesn't look great)


With adapter and stubby silencer, fits nice and flush.

Hi.
This is my new toy.
JG M4
RIS 320mm
g&p fixed stock
battleaxe M4 electric drum magazine 2500 rds
reinforced gearbox parts (mainly SHS)
high conductivity and minimal resistance silver-plated electical wiring
mosfet (gate-type, home-made)
deans connector

GBBR M4

DSCF9211.JPG

Finally got this thing finished, started a year ago and got bits for it as money became avaiable

Externals:
Noveske Receiver
Noveske 10" rail system
Magpull ACS stock
Magpull MBUS
Unknown Suppressor

Internals:
Ultimate Gearbox
SHS supershooter gearset 13:1
Raptor Mosfet (currently acting up, in the process of being fixed; hopefully )
Puts out about 35 BB's a second on a 9.6V NiMH battery when I allow the mosfet to set it to max. Have it set at 20/sec at the moment.
Madbulls 3in1 tracer hop up unit and blue bucking
Madbull 6.03 TBB


BILD0643

Currently putting together a French resistance loadout/impression (Probably not 100% accurate), and needed a pistol. Was going more for looks rather than practicality.

My latest CRC custom gun, a JP Industries M4. Seen Chris Costa using the real steel version and thought I'd really love an airsoft version. So after approaching my good mate Rooky, here she is.

Pics:










Externals;
Madbull JP Rifles Complete CNC Receiver
Madbull JP Rifles handguard 12inch
Madbull JP Gas block kit
Madbull JP 4inch Tac rail
Magpul CTR stock
Magpul Pistol Grip

Internals;
Complete Systema drop in gearbox
Systema hop up unit
Systema Magnum Motor
Madbull Black Python V3 6.03 tbb
Purple Prometheus Hop Rubber
ASCU Gen3 MOSFET

Absolutely chuffed to bits with this, cheers Carl, very much appreciated as always

WE SCAR-L GBB.
G&G GR16 CQW
KJW Sig Sauer 9229

The Aussies don't have a snow camouflage, but if they did this is what it would look like...







Disruptive Pattern Snow Uniform.

PS: In the last photo, it's in plain sight, not under the bush.

After hours and hours of filing, scrubbing, polishing and fitting by hand



















My own 1911 custom, based after one from a game.
Externals:
-ARMY Full metal frame * I polished the slide myself*
-Real wood grips, plain with Weaver(stance) cut into them
-Chromed grip screws (poorly don)
-NOVA Stainless Wilson Extended slide stop
-NOVA Stainless Ed brown single safety
-NOVA Stainless Wilson Hammer
-NOVA Stainless Ducktail grip safety
-Dytac 3-dot sights
-Flat Mainspring housing no lanyard type
-NOVA Stainless Barrel bushing
-NOVA Stainless Recoil spring plug
-Tanio Koba Silencer screw &

Internals
-Tokyo Marui MEU outer barrel
-Tokyo Marui Hop unit
-Madbull tightbore inner barrel (6.03)
-Nine ball purple hop-up rubber
-120% recoil/loading nozzle/hammer springs
-Action REinforced Loading nozzle with upgraded gas valve
-PDI Winter piston head in a standard marui blowback housing
-My own modifications to Sear, Leaf spring and knocker valve for ridiculous performance

Everything is exactly as per the Metal Gear Solid 3 Model (except for the magazine release (arriving tomorrow) and Mainspringhousing (needs stepping))

What you think?

So I was thinking of buying a tactical light for the P226, it's very handy for clearing out dark basements & so on. Then I found out that most tactical torches are made with a 1 inch body... as are rifle scopes.

That's handy, I thought. And I remembered that I had a pair of scope mounts sitting in the parts box. And with the addition of a 9-LED torch from Tesco (it's hardly recoil-rated, but then this is airsoft), hey presto...



Not a bad solution for eight euro. Reduce, Reuse and Recycle.

Heckler & Koch love in.
VFC m27 IAR gbbr
VFC mp5a2 gbb smg
KSC mp7 gbb smg
KSC USP tactical

FINALLY finished my VLTOR M4 Build.
Started as a SRC M4 Micro And now turned into the beast pictured below



I used the original SRC Gearbox Shell and left a few parts intact in the gearbox but replaced with
New sector gear
New Sector chip
New Piston head,
Re-greased and re-shimmed
with a new air nozzle and hop-up rubber just to top it all off



Externals include ;

G&P VLTOR Upper and Lower Recievers
G&P 16.5 " Outer Barrel with a new internal barrel flush with the end of outer.
A comfy New pistol grip
New G&P Motor
New LMT Crane Stock and Stock tube
New 4x40 Swiss Arms Scope
New genuine Magpul MBUS sights (only front sight shown in photo)
New standard straight foregrip
( Another ) New Blackwater Bipod
Classic Army M203 Long grenade launcher
All resting on a LaRue Tactical Front Rail.
With a Spartan 12" Silencer to add a bit of length :rolleyes:

Firing 324fps With a 9.6 Intellect Numchuck Battery using .2g bb's
Firing around 20 bb's p/second

So after all that, a few months of getting bits and bobs together, with several run-ins with a specific irish retailer -.- ,
(Not saying who) , i come out with my finished VLTOR M4
( Could be classed as a DMR w/o the grenade launcher and by adding a bit of camo tape )



My lovely new M4 pictured beside my wishing well i use to wish for new parts
I'll just take this as a chance to say how lovely all your pieces are,
Happy Airsofting lads

ok , after a few evolutions i think the 416 is finished

last piece of the jigsaw was a Leupold Mark4 CQ/T 1x-4x Tactical Scope
such a versatile gun suiting both the outdoors as is , and cqb after an optic change

Hey lads pretty new to this but I'm getting up to speed. Your all a fairly sound bunch of lads here

Trying to gather up gear now to start this airsofting lark!

Anyway this is my Classic Army G3 FS3 SG1, bought off whydave a number of months ago, thank you by the way.

I wanted to develop a DMR type G3, so as it sits now it has the following;

PSG-1 madbull 6.03 inner (590mm).
J&J 3-9x50 scope (waiting on a 3" sunshade ).
Proper claw type scope mount.
King Arms 210mm silencer.

Looking at my options for internals but so far its standard, just well greased, shimmed and reliable so far

20130615_204312.jpg

20130615_204354.jpg

20130615_204325.jpg