Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Manuals / Request a manual

1…2122242627…37

Comments

  • #1152
    Bibrock
    Registered Users Posts: 12 ✭Bibrock


    Hi

    Would anyone have a copy of user and Engineer manual for Europlex Identifier panel please?

    Many thanks


  • #1153
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,789 Mod ✭✭✭✭KoolKid


    PMed you that.


  • #1154
    antonius1000
    Registered Users Posts: 1 ✭antonius1000


    Hi
    new to the board.
    i'm looking for the engineers manual for a hkc quantum 70 alarm

    i can see the user manual on the sticky thread(i have the user manual anyway) -so hope i haven't overlooked it.

    thanks in advance
    antonius


  • #1155
    altor
    Registered Users, Registered Users 2 Posts: 11,772 ✭✭✭✭altor


    antonius1000 wrote: »
    Hi
    new to the board.
    i'm looking for the engineers manual for a hkc quantum 70 alarm

    i can see the user manual on the sticky thread(i have the user manual anyway) -so hope i haven't overlooked it.

    thanks in advance
    antonius

    Sent you that by P.M.

    www.altor.ie



  • #1156
    degsie
    Registered Users, Registered Users 2 Posts: 8,750 ✭✭✭degsie


    Anybody have the installation guide for the attached SAB board? Its an old H.K.C board. Thanks

    326165.jpg


  • #1157
    collywobbler
    Registered Users Posts: 4 ✭collywobbler


    Hi,
    Great and handy thread, Would anyone have a manual for a Europlex 3725-200P Intruder alarm system? I have found a basic User manual online but there is no fault codes/information in it,

    cheers


  • #1158
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,789 Mod ✭✭✭✭KoolKid


    I PMed you the Europlex Manual.

    I don't have anything in PDF on the HKC bell.
    If you post a thread on what you need help with I'm sure we can get you sorted.


  • #1159
    Toby250
    Registered Users Posts: 25 ✭Toby250


    Would you have a list of fault codes for astec panels? Thanks


  • #1160
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,789 Mod ✭✭✭✭KoolKid


    They are in the manual I have PMed you.


  • #1161
    Toby250
    Registered Users Posts: 25 ✭Toby250


    KoolKid wrote: »
    They are in the manual I have PMed you.

    Got that thanks,I'd say it's on the way out,do you know of any direct replacement panel?


  • Advertisement
  • #1162
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,789 Mod ✭✭✭✭KoolKid


    There's no direct replacement. GSD is the only one that is any way compatible.


  • #1163
    HighFlyR
    Registered Users Posts: 6 ✭HighFlyR


    KoolKid wrote: »
    A kind offer Tim.
    I would say its best for people to request something & for the offer to follow.
    I think the thread will be easier for a user to follow that way. Especially as it grows to a large number of pages.

    By all means everyone feel free to link to any other manuals not listed above.
    Hi I am new on here. Would you have a installers manual for scopetronic homeguard?


  • #1164
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,789 Mod ✭✭✭✭KoolKid


    I Pmed you that. Hope it helps.


  • #1165
    Toby250
    Registered Users Posts: 25 ✭Toby250


    KoolKid wrote: »
    There's no direct replacement. GSD is the only one that is any way compatible.

    Would much need changing to fit the GSD.. What would the cost be like? Thanks


  • #1166
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,789 Mod ✭✭✭✭KoolKid


    Depends a lot on the wiring that's in place.
    The GSD i70 is a combined unit. If the existing control panel is in a location away from the hall etc you would be fitting a separate PSU and housing the expander there.


  • #1167
    Muttley_666
    Registered Users Posts: 43 ✭Muttley_666


    Have one request, which will lead to another.

    My hkc alarm (not sure what model) has recently stopped working as the batteries in the pirs went dead. While I have the batteries changed, I still have a comms fail error. I know I need to reset the pirs by using a walk-thru.

    I think I need a manual to figure out where the routine is, but how do I find the model number from my alarm. The keypad is pretty standard.

    Real newbie question, I know. :-)


  • #1168
    altor
    Registered Users, Registered Users 2 Posts: 11,772 ✭✭✭✭altor


    degsie wrote: »
    Anybody have the installation guide for the attached SAB board? Its an old H.K.C board. Thanks

    326165.jpg

    Its straight forward to add this to any system.
    External bell + - to same in panel.
    Strobe + - to internal bell in panel or else if you have engineer access you can set up an output as strobe.
    BHO to BHO in panel.
    Tamper return to tamper return in panel.

    www.altor.ie



  • #1169
    altor
    Registered Users, Registered Users 2 Posts: 11,772 ✭✭✭✭altor


    Toby250 wrote: »
    Got that thanks,I'd say it's on the way out,do you know of any direct replacement panel?

    What fault codes do you have?
    There are too many company's out there looking to upgrade than fix an Astec system.
    In most cases the system can be repaired.

    www.altor.ie



  • #1170
    altor
    Registered Users, Registered Users 2 Posts: 11,772 ✭✭✭✭altor


    Muttley_666 wrote: »
    Have one request, which will lead to another.

    My hkc alarm (not sure what model) has recently stopped working as the batteries in the pirs went dead. While I have the batteries changed, I still have a comms fail error. I know I need to reset the pirs by using a walk-thru.

    I think I need a manual to figure out where the routine is, but how do I find the model number from my alarm. The keypad is pretty standard.

    Real newbie question, I know. :-)

    You would need to know which system you have installed.
    This thread is for requesting manuals so feel free to start a new thread.

    www.altor.ie



  • Advertisement
  • #1171
    Toby250
    Registered Users Posts: 25 ✭Toby250


    It was fault 92,i switched it off at the fuse box and back on again its fine now again but battery is flashing up on lcd ill order a new battery and get it fitted see will it stay going for an other few years.


  • #1172
    altor
    Registered Users, Registered Users 2 Posts: 11,772 ✭✭✭✭altor


    Toby250 wrote: »
    It was fault 92,i switched it off at the fuse box and back on again its fine now again but battery is flashing up on lcd ill order a new battery and get it fitted see will it stay going for an other few years.

    That is an eeprom error. Down powering and powering back up if it brings it back on line you should be all good. The low battery needs to be replaced as soon as tho. This is more than likely what is pulling the system down.

    www.altor.ie



  • #1173
    philbur
    Registered Users Posts: 6 ✭philbur


    Hi, I would also very much appreciate a copy of the engineers user manual for the HKC 70 intruder alarm. Also is there such a thing as a default engineer access code?

    Many thanks in advance.

    Phil:)


  • #1174
    philbur
    Registered Users Posts: 6 ✭philbur


    Thanks for the manual KoolKid that was real quick. It was the Quantum 70 that I was looking for. I have an immediate issue in that the alarm is calling my mobile every 10 minutes or so with a voice message to tell me that there is a low battery. The log shows that the hall IR sensor battery is low. I send the "0" confirmation back but the messages just keep on coming. How to I stop the messages.

    Also I am curious as to how the alarm connects to my land-line, there is no cable from the alarm to the phone socket?

    Regards
    Phil:)


  • #1175
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,789 Mod ✭✭✭✭KoolKid


    Probably best to change the PiR battery anyway. (For a couple of reasons)
    Can you see the phone line wired into the panel?


  • #1176
    philbur
    Registered Users Posts: 6 ✭philbur


    Thanks for the feedback. I do plan to change the battery but how do I stop the phone messages in the mean time. Also now the panel shows a "red" alarm and beeps every thirty minutes or so with a voice message about the battery. How do I stop this alarm until I can change the battery? It's driving me crazy.

    Phil:)


  • Advertisement
  • #1177
    philbur
    Registered Users Posts: 6 ✭philbur


    Thanks for the feedback. I do plan to change the battery but how do I stop the phone messages in the mean time. Also now the panel shows a "red" alarm and beeps every thirty minutes or so with a voice message about the battery. How do I stop this alarm until I can change the battery? It's driving me crazy.

    Phil:)

    PS: I think I recall that the phone connection runs inside the wall


  • #1178
    furry87
    Registered Users Posts: 4 ✭furry87


    New here cold I get the engineer/installers manual for hkc quantum 70.

    Cheers


  • #1179
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,789 Mod ✭✭✭✭KoolKid


    Sent you that. Hope it helps.;)


  • #1180
    furry87
    Registered Users Posts: 4 ✭furry87


    Thanks very much


  • #1181
    altor
    Registered Users, Registered Users 2 Posts: 11,772 ✭✭✭✭altor


    philbur wrote: »
    Thanks for the feedback. I do plan to change the battery but how do I stop the phone messages in the mean time. Also now the panel shows a "red" alarm and beeps every thirty minutes or so with a voice message about the battery. How do I stop this alarm until I can change the battery? It's driving me crazy.

    Phil:)

    Putting in your code will take the system out of alarm.
    When the alarm rings your phone, follow the instruction in the message.

    www.altor.ie



  • Advertisement
  • #1182
    Snake Plisken
    Registered Users, Registered Users 2 Posts: 13,033 ✭✭✭✭Snake Plisken


    Hey Koolkid

    would you have the Aritech CS350 engineers manual? And possible engineer access code?

    Thanks


  • #1183
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,789 Mod ✭✭✭✭KoolKid


    PMed you that.


  • #1184
    luketyrrell
    Registered Users Posts: 5 ✭luketyrrell


    Hi Koolkid,

    Any chance I could get a copy of the engineers manual for the HKC Quantum 70 please ?


  • #1185
    luketyrrell
    Registered Users Posts: 5 ✭luketyrrell


    Hi Koolkid,

    Any chance I could get a copy of the engineers manual for the HKC Quantum 70 please ?


  • #1186
    Dinny48
    Registered Users Posts: 3 ✭Dinny48


    Hi all
    just back from UK and bought a house in Dublin which has a HKC Quantum installed.
    Would be obliged if someone could tell me where I could get a copy of installation manual as I want to install additional sensors. I see that HKC have an app related to the Quantum. Has anyone used this? And if so what is your experience of it..

    Love this forum and some great topics on here.
    Dinny


  • #1187
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,789 Mod ✭✭✭✭KoolKid


    Hi Dinny
    I have sent you that manual by PM. HKC have an app for their panels which like any other gives you remote control of the panel as well as alarm event notifications. Unfortunately the HKC app is the only one where you have to pay for the app and pay an annual charge to use it.


  • #1188
    luketyrrell
    Registered Users Posts: 5 ✭luketyrrell


    KoolKid wrote: »
    Hi Dinny
    I have sent you that manual by PM. HKC have an app for their panels which like any other gives you remote control of the panel as well as alarm event notifications. Unfortunately the HKC app is the only one where you have to pay for the app and pay an annual charge to use it.

    Can you forward into me ?


  • #1189
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,789 Mod ✭✭✭✭KoolKid


    PMed you that manual.


  • #1190
    luketyrrell
    Registered Users Posts: 5 ✭luketyrrell


    KoolKid wrote: »
    PMed you that manual.

    Legend


  • #1191
    LastWord
    Registered Users Posts: 7 ✭LastWord


    altor wrote: »
    That is no problem, sent by P.M.

    Hi would it be possible to get a copy of the engineer manual as well please!


  • Advertisement
  • #1192
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,789 Mod ✭✭✭✭KoolKid


    I sent you that. Hope it helps.


  • #1193
    declanmul
    Closed Accounts Posts: 3 ✭declanmul


    Hi all,

    Anyone know how I can find out what the model number of my HKC secure watch alarm. Its not in the control manual or the box which holds the alarm. I know the engineers code and was wondering does anynody know what subsection it is under?

    Thanks in advance


  • #1194
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,789 Mod ✭✭✭✭KoolKid


    The older ones are either a 6/10 or 8/12 the easy way is too look at the number of zones on the panel.
    I sent you the manual as well. Hopefully that will help you.


  • #1195
    bbability
    Closed Accounts Posts: 2,504 ✭✭✭bbability


    KoolKid wrote: »
    The older ones are either a 6/10 or 8/12 the easy way is too look at the number of zones on the panel.
    I sent you the manual as well. Hopefully that will help you.

    Any chance you could PM me the same. I'm sure it's an 8/12


  • #1196
    Seamusm89
    Registered Users Posts: 3 ✭Seamusm89


    Hi, I've got a scopetronic that's about 20 years old, and is making a humming noise only recently. I lifted the panel off and took out the fuse and the humming stopped. I've a newish battery in it from about 2 years ago. Any ideas?


  • #1197
    kub
    Registered Users, Registered Users 2 Posts: 6,555 ✭✭✭kub


    Have you disconnected your battery to determine if the noise stops?

    It is either the transformer is under pressure to produce more power or maybe it is on the way out.

    Try the battery first, then the 12 volt output, then perhaps the bell box hold off.


  • #1198
    Seamusm89
    Registered Users Posts: 3 ✭Seamusm89


    Thanks. Is there any manual to show how to swap out those bits, other than the battery?


  • #1199
    Damhok
    Registered Users Posts: 2 ✭Damhok


    Hi,

    Would anyone have an engineers manual for an astec 63 alarm.

    Many thanks in advance.


  • #1200
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,789 Mod ✭✭✭✭KoolKid


    I PMed you that manual.


  • Advertisement
  • #1201
    Damhok
    Registered Users Posts: 2 ✭Damhok


    Thanks KoolKid.


This discussion has been closed.
Advertisement