Manuals / Request a manual

Curry Addict · 21-03-2011 1:52pm

hi, im looking for an installer manual for my Aritech CS 350. any help appreciated!

altor · 21-03-2011 2:15pm

Curry Addict wrote: »

hi, im looking for an installer manual for my Aritech CS 350. any help appreciated!

Sent you a P.M.

mos22 · 21-03-2011 7:58pm

Hi
I am wondering would anybody have the engineering manual with the codes for the astec 63
Thanks

KoolKid · 21-03-2011 8:12pm

Sent you that.
If you need any help give us a shout here.

meercat · 24-03-2011 2:34pm

Koolkid
Can you send me an installation manual for an astec 63 also
Thanks in advance
Meercat

KoolKid · 24-03-2011 4:50pm

Sent..;)

meercat · 24-03-2011 9:00pm

cheers koolkid

KoolKid · 24-03-2011 9:05pm

Your welcome.
Any problems , you know where we are.

OBROIN · 28-03-2011 6:47pm

Hi Guys,

Any chance of the installation manual for the Aritech 250, monitoring has been cancelled and need to set up self monitoring. Ta.

KoolKid · 28-03-2011 7:29pm

I sent you them.
If you need any help with it let us know.;)

OBROIN · 28-03-2011 9:02pm

Hi KoolKid,

Many thanks for that. Cheers

Arithon · 29-03-2011 9:45pm

Hey there,
any chance I could get a copy of the Astec 63 installation manual?

The alarm in my apartment is reporting a SAB (5A6) fault, and I'd like to read up on what this means. Also, having put it into engineer mode, I'm not so sure how to exit

altor · 29-03-2011 9:50pm

Arithon wrote: »

Hey there,
any chance I could get a copy of the Astec 63 installation manual?

The alarm in my apartment is reporting a SAB (5A6) fault, and I'd like to read up on what this means. Also, having put it into engineer mode, I'm not so sure how to exit

Sent you a P.M.

Hedermk · 04-04-2011 6:49pm

KoolKid wrote: »

This has been requested as a sticky . I think this is a good idea.
Basicaly if you have a link to a user manual post it here.
If the manual you require is not here post a request & see if someone can help you.
Do not post links to any sites which charge & do not post up links for engineer manuals. (requesting an Engineer manual is fine)
If people want to exchange these by email thats up to them.
Please keep this thread on topic.If you wish to discuss anything else please start a new thread or post in a relevant thread.

OK then lets get started.

Astec User Manual

Astec Fusion User Manual

Aritech CS350/CD34 User Manual

Aritech CS450 User Manual

Aritech CD72/95 User Manual

Premier 4/12 Master User Manual

Premier 48/88/168 User Manual

SigNET User Manual

HKC Securewatch Manager Manual

HKC Securewatch User Manual

HKC Securewatch Owners Manual

Simon (Phonewatch Wireless) User Manual

Can you send me the installers guide to the Astec 63 house alarm.

Many thanks

KoolKid · 04-04-2011 7:01pm

Sent you that.
Any problems give me a shout.;)

altor · 06-04-2011 9:16pm

goan wrote: »

I have just joined and noticed somebody was looking for the manuals. I tried ukpanels.com but the site is blocked for that particular manual.
I am replacing my windows and need to disengage the sensors on the windows. I have the engineers code but I don't know how to use it. And after removing the sensors how do I re-install the system?
Thanks for any help in this.

Hi goan,

I tried to reply to your P.M. but you have disabled them. It sounds like you have blown one of the fuses on the circuit board. If you have a meter can you check them and replace any blown fuse if necessary.

Vytukas · 09-04-2011 5:06pm

Hi Koolkid,
I am wondering would you have the installation manual for Aritech CD34/CS350.
I've inherited house and want to bring house alarm back to live.
And by the looks of it your the right person to ask

Thanks

KoolKid · 09-04-2011 5:34pm

Sent you a PM with them.
If you need any help give me a shout.;)

Moffo · 13-04-2011 11:20am

Hi Guys, just saw this thread now. I'm looking for the engineers manual and codes for the Astech 63dv also, as I'm having problems, as posted in another thread.

Much appreciated.

altor · 13-04-2011 2:44pm

Moffo wrote: »

Hi Guys, just saw this thread now. I'm looking for the engineers manual and codes for the Astech 63dv also, as I'm having problems, as posted in another thread.

Much appreciated.

Sent you a P.M.

Moffo · 13-04-2011 3:21pm

Thanks Altor,

sent you my email address by pm.

Cheers

altor · 13-04-2011 3:27pm

Moffo wrote: »

Thanks Altor,

sent you my email address by pm.

Cheers

Your welcome, that is sent.

Pauley2 · 14-04-2011 10:55pm

Hi,

Looking for Installation/Engineer manual for Siemens SPC 4320

Tx

KoolKid · 14-04-2011 11:17pm

Sent you a PM. Hope that one helps.
Any probs give us a shout here.;)

Jamey_29 · 15-04-2011 5:01pm

Hi...

I would be grateful if someone could provide me with an enginnering manual for a HKC 1070.

altor · 15-04-2011 11:06pm

Jamey_29 wrote: »

Hi...

I would be grateful if someone could provide me with an enginnering manual for a HKC 1070.

Sent you a P.M.

Jamey_29 · 16-04-2011 8:32am

cheers Altor.

altor · 16-04-2011 10:36pm

Jamey_29 wrote: »

cheers Altor.

Your welcome, any problems let us know.

IIS · 28-04-2011 5:24pm

Hi Guys, could someone please send me the installation manual for the astec 49D?

KoolKid · 28-04-2011 5:26pm

Sent you that..;)

IIS · 28-04-2011 5:40pm

KoolKid wrote: »

Sent you that..;)

Thanks a lot KoolKid :-D

PMzd · 02-05-2011 12:46pm

Hi, everyone. have a code "17 call engineer" on my Astec system today. Yesterday system gone off itself on non-existing contact Zone 5.....I have only sensors on that zone. Any ideas? Service Manual would be very appreciated!Thanks in advance!

KoolKid · 02-05-2011 12:49pm

Sent you that. If you need any help you know where we are.

PMzd · 02-05-2011 12:54pm

Really appreciate so fast response from you! Thanks again!

GEORGIEPORGIE · 27-05-2011 8:49am

Hi All,

My alarm not displaying the affected zones that are triggering it to come on. I tried setting the alarm off intentionally in different zones, to see if the operator memory display would update with the new alarm log but it did'nt. I'm looking for the Homeguard Scopetronic Engineers manual to delete the operator memory logs in the hope that the next alarm activation uploads to here at least and I can start troubleshooting the problem.

Thanks,
George..............

altor · 27-05-2011 11:14am

Sent you a P.M

GEORGIEPORGIE · 27-05-2011 12:50pm

Replied....Cheers.

DMO666 · 04-06-2011 9:36am

Hi all,
I have a Aritech CS250 I am looking to restore and reuse.
Can anyone help with a installation manual.
Suprised I haven't got one, I think it got loaned out and never returned.

Many thanks.

altor · 04-06-2011 9:51pm

DMO666 wrote: »

Hi all,
I have a Aritech CS250 I am looking to restore and reuse.
Can anyone help with a installation manual.
Suprised I haven't got one, I think it got loaned out and never returned.

Many thanks.

I sent you a P.M

Merch · 08-06-2011 9:16pm

I'm looking for any of the europlex signet engineers/installation manual, preferably one with IP access.
I want to see what information is in it regarding installing and setup, if i decide to purchase one, I found my current alarm manual (the aritech cs350) a bit vague on some aspects but mangaed to figure it out with someones input.

Cheers

altor · 08-06-2011 9:45pm

Merch wrote: »

I'm looking for any of the europlex signet engineers/installation manual, preferably one with IP access.
I want to see what information is in it regarding installing and setup, if i decide to purchase one, I found my current alarm manual (the aritech cs350) a bit vague on some aspects but mangaed to figure it out with someones input.

Cheers

I sent you a P.M

MrPC · 12-06-2011 9:43pm

Hi All,
Does anyone have a copy of the Honeywell Domonial engineers installation manual please?
I have the basic manual for programming via the TCU keypad, but I'd like to get hold of the full manual - particularly the complete list of parameter codes.

Many thanks!

GadgetBenny · 16-06-2011 12:04pm

Hi apologies if this is not the correct procedure or forum.

I’m having problems with my Astec alarm, I think its an Astec 63, I have the eng code and user manual but I don’t have the installation manual. I need to try and turn off the external bell as its having problems and I don’t have the commands to do that. I would also like to extend the alarm to other windows so the installation manual would be appreciated.

Thanks in advance.

altor · 16-06-2011 2:57pm

GadgetBenny wrote: »

Hi apologies if this is not the correct procedure or forum.

I’m having problems with my Astec alarm, I think its an Astec 63, I have the eng code and user manual but I don’t have the installation manual. I need to try and turn off the external bell as its having problems and I don’t have the commands to do that. I would also like to extend the alarm to other windows so the installation manual would be appreciated.

Thanks in advance.

Sent you a P.M

KoolKid · 16-06-2011 3:16pm

Hi GadgetBenny & welcome to Boards.ie.
Your procedure is spot on for this topic. I sent you the Astec Manuals.
If you need any help you know where we are.

wendy05 · 16-06-2011 7:09pm

MrPC wrote: »

Hi All,
Does anyone have a copy of the Honeywell Domonial engineers installation manual please?
I have the basic manual for programming via the TCU keypad, but I'd like to get hold of the full manual - particularly the complete list of parameter codes.

Many thanks!

i would be intensely grateful if i could have this too.

GadgetBenny · 17-06-2011 2:01pm

KoolKid wrote: »

Hi GadgetBenny & welcome to Boards.ie.
Your procedure is spot on for this topic. I sent you the Astec Manuals.
If you need any help you know where we are.

Thanks Altor and Koolkid i really appreciate the help with this. thanks again.

altor · 17-06-2011 8:55pm

GadgetBenny wrote: »

Thanks Altor and Koolkid i really appreciate the help with this. thanks again.

Your welcome,

If you have any more problems you know where we are

qb514 · 20-06-2011 9:23pm

Hello,

I am having some problems with my Astec 63 alarm. Would anyone be able to send me the instalation manual? Thanks in advance for you help.

altor · 20-06-2011 9:39pm

qb514 wrote: »

Hello,

I am having some problems with my Astec 63 alarm. Would anyone be able to send me the instalation manual? Thanks in advance for you help.

I sent you a P.M

Manuals / Request a manual

Comments