Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Change Eircom Phonewatch Alarm Code

13»

Comments

  • #102
    bikefreakvinnie
    Registered Users Posts: 43 ✭bikefreakvinnie


    Thanks Altor, so if I dont have paper work I can still get it by requesting it from them?..


  • #103
    altor
    Registered Users, Registered Users 2 Posts: 11,767 ✭✭✭✭altor


    bikefreakvinnie wrote: »
    Thanks Altor, so if I dont have paper work I can still get it by requesting it from them?..

    You will need to fill out forms to confirm you are the new owner.

    www.altor.ie



  • #104
    Seve1980
    Registered Users Posts: 5 ✭Seve1980


    Hi,
    Would be very grateful if someone could help with my pw alarm that keeps beebing at all hours .. Rang phonewatch and they said I'd have to get one of there engineers out at a cost as I cancelled with them a few months.. I also cancelled my home phone to..
    It's a Simon xt which keeps saying communication fail...
    Thanks again if you can help..


  • #105
    altor
    Registered Users, Registered Users 2 Posts: 11,767 ✭✭✭✭altor


    Seve1980 wrote: »
    Hi,
    Would be very grateful if someone could help with my pw alarm that keeps beebing at all hours .. Rang phonewatch and they said I'd have to get one of there engineers out at a cost as I cancelled with them a few months.. I also cancelled my home phone to..
    It's a Simon xt which keeps saying communication fail...
    Thanks again if you can help..

    The system has no line now and that is why you are getting this fault.
    You can request the code off P.W. by signing a waiver and deleting the numbers the system is dialing them on.

    Sent you a P.M. re the code also.

    www.altor.ie



  • #106
    Seve1980
    Registered Users Posts: 5 ✭Seve1980


    altor wrote: »
    The system has no line now and that is why you are getting this fault.
    You can request the code off P.W. by signing a waiver and deleting the numbers the system is dialing them on.

    Sent you a P.M. re the code also.

    Thanks for the info altor
    Much appreciated


  • #107
    altor
    Registered Users, Registered Users 2 Posts: 11,767 ✭✭✭✭altor


    Seve1980 wrote: »
    Thanks for the info altor
    Much appreciated

    No probs, any other questions please let us know.

    www.altor.ie



  • #108
    bikefreakvinnie
    Registered Users Posts: 43 ✭bikefreakvinnie


    altor wrote: »
    You will need to fill out forms to confirm you are the new owner.

    Thanks for all your help with it Altor - still chipping away at it...


  • #109
    altor
    Registered Users, Registered Users 2 Posts: 11,767 ✭✭✭✭altor


    bikefreakvinnie wrote: »
    Thanks for all your help with it Altor - still chipping away at it...

    You could default this system and set it back up if you don't or cant get the code.
    Sent you the manual by P.M.

    www.altor.ie



  • #110
    kenny2204
    Registered Users Posts: 8 ✭kenny2204


    Hi Guys.
    I recently moved into a house with a concord alarm panel. It kept trying to dial out and cutting of the phone line. I disconnected the line and now i keep getting a fault. Can i change the programming on this so it will ring my phone and also how do i change the code. Thanks in advance.


  • #111
    altor
    Registered Users, Registered Users 2 Posts: 11,767 ✭✭✭✭altor


    kenny2204 wrote: »
    Hi Guys.
    I recently moved into a house with a concord alarm panel. It kept trying to dial out and cutting of the phone line. I disconnected the line and now i keep getting a fault. Can i change the programming on this so it will ring my phone and also how do i change the code. Thanks in advance.

    That is the way it works. It is called line priority.
    The system if it had a domestic dialer built in can be programmed to dial ne phone and admit a series of alarm tones. A better option is to add a voice or text dialer so it can contact a few different phones on an alarm activation.

    www.altor.ie



  • Advertisement
  • #112
    RebelYell5
    Registered Users Posts: 6 ✭RebelYell5


    I've just bought a home that has a simon 3 alarm, unmonitored. I'm presuming that I need the engineer's code (+ manual) to help configure it. I'm not intending to add a monitoring service, just to turn it.

    All help appreciated.


  • #113
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,789 Mod ✭✭✭✭KoolKid


    Is this a phonewatch installation?


  • #114
    RebelYell5
    Registered Users Posts: 6 ✭RebelYell5


    KoolKid wrote: »
    Is this a phonewatch installation?

    Yes, I've moved into a house that already has a Simon PW alarm. Thx.


  • #115
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,789 Mod ✭✭✭✭KoolKid


    I have sent you a PM with the manual & information on the engineer code.

    If you are looking to get it to ring you directly.....



    Drop the lid then enter your engineer code.
    Delete option 04 and done.
    Delete option 05 and done.
    Then delete option 06 and done.
    Now add option 43 and enter the phone number you want the system to call and done.
    Add option 44 10 and done.
    Add option 17, 20 and done.

    Note with option 17 sometimes these panels need to see a 3 digit number.
    If so enter:
    Add option 17, 020 and done.


  • #116
    deadbeat
    Registered Users Posts: 72 ✭✭deadbeat


    hey, have the same issue as original poster - just moved into a house with phonewatch (concord system) and would like to change the code. anyone have details on how to do this? (i have the current code)


  • #117
    Bussywussy
    Registered Users, Registered Users 2 Posts: 940 ✭✭✭Bussywussy


    deadbeat wrote: »
    hey, have the same issue as original poster - just moved into a house with phonewatch (concord system) and would like to change the code. anyone have details on how to do this? (i have the current code)

    I'm in same boat,I've a HKC Panel and don't have engineer code to change alarm code the last owner had,how can I get code or who do I call,is it possible to change panel to one where I can self monitor via app or sim/text???


  • #118
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,789 Mod ✭✭✭✭KoolKid


    You can call the installation company and ask them or you can get any licenced company out to default and reprogramme the system for you.
    Unfortunately we are no longer allowed help you here with engineer codes.


  • #119
    Henry2010
    Registered Users Posts: 2 ✭Henry2010


    Hey there, can anybody help?

    My eircom alarm keeps beeping every four hours - 12pm, 4am and 8am etc.

    Can anybody send me the engineers code as eircom want to charge me 220 for service and new dummy bell box?
    I just don't have that type of money unfortunately. The alarm was installed in 2005 and I think it's a simon

    Thanks in advance - exhausted from broken sleep......


  • #120
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,789 Mod ✭✭✭✭KoolKid


    I'm sorry we are not allowed help here with engineer codes. Shop around there are plenty of licenced companies who can look at this for you.
    You can also request the code from Phonewatch.
    I'm curious, why are they saying you need the dummy box replaced? Is the old one not working or something?:confused::D


  • Advertisement
  • #121
    rmbkennedy
    Registered Users Posts: 5 ✭rmbkennedy


    Just in a new house with eircom (simon 3) alarm panel. We have no idea what the access codes are. Can anyone tell me what the reset codes are for this? It keeps on saying "use number key to enter id" I've tried the reset procedure as per the installation guide.


  • #122
    davidconroy46
    Registered Users, Registered Users 2 Posts: 264 ✭✭davidconroy46


    Done you have a code?


  • #123
    altor
    Registered Users, Registered Users 2 Posts: 11,767 ✭✭✭✭altor


    rmbkennedy wrote: »
    Just in a new house with eircom (simon 3) alarm panel. We have no idea what the access codes are. Can anyone tell me what the reset codes are for this? It keeps on saying "use number key to enter id" I've tried the reset procedure as per the installation guide.

    54321 is the default code.

    www.altor.ie



  • #124
    cs5
    Registered Users Posts: 122 ✭✭cs5


    Hi

    I realise this thread has been dead for a while.

    I have the eircom Phonewatch HKC system but can’t change the alarm code. Eircom as useful as a chocolate teapot. Anybody able to help please?

    Thanks


  • #125
    altor
    Registered Users, Registered Users 2 Posts: 11,767 ✭✭✭✭altor


    cs5 wrote: »
    Hi

    I realise this thread has been dead for a while.

    I have the eircom Phonewatch HKC system but can’t change the alarm code. Eircom as useful as a chocolate teapot. Anybody able to help please?

    Thanks

    If you enter your code and the alarm sets you will need engineer access to change the code.
    P.W. will provide this code if you sign a waiver form and send it back to them.

    www.altor.ie



Advertisement