The WANTED Thread

Slidey · 18-10-2009 10:17pm

Take it to PM please lads,

slaxbolts · 19-10-2009 1:03pm

also looking for 3 bay hat shed with lean too must be in good nik and not rusty willing to psend 500 quid must be ready to take away!

WestWicklow1 · 01-11-2009 12:00am

I am looking to buy a short wheelbase series 70 Landcruiser aged from about 1988 to 1995.

The condition of the engine and/or gearbox is not important. In fact if they're snookered all the better because you'll be looking a lot less for it.

The body and chassis MUST be in good condition. Please don't offer me any rust buckets (I already have one).

Just Bob · 02-11-2009 8:26pm

Wanted - JCB 3cx 4WD '86 to '91 torque/engine/hydaulics must be very good. Preferable with 3/1 bucket with forks and extradig. pm please

motorimporter · 17-11-2009 4:34pm

Hi lads & lasses,

Just thought I'd ask here before buying elsewhere.

I need a gearbox and transfer box for a 1992 Landrover defender 200 tdi.

Its the LT77 version I require.

Needs to be in perfect working order.

Delivery to Dublin 11 or 15 would be great (I'll cover your fuel), but can collect if necessary within 50 miles of Dublin.

Thanks in advance.

Pixie4 · 17-11-2009 11:01pm

Hi.

I'm looking for a secondhand windscreen or a reasonably priced new one for a Toyota Landcruiser '06 model. Also looking for a rear wheel cover.

Thanks

mickeymac_ire · 18-11-2009 3:27pm

Hi I am seeking a cheap engine for my Leyland, ye i know a rare breed, but the same engine is used in MF 135, does anyone know where there decent engine for sale at reasonable money, based in midlands

_cAsEi_ · 21-11-2009 8:01pm

hi all

im in the market for a commercial land rover defender 90 1984-1990,(must have coil spring suspension but the older the better), diesel chassis must be decent for its age and running
around the €2500 mark
any ideas on where to get such a vehicle would be greatly appriceated

thanks michael

Francis1 · 28-11-2009 2:45pm

wanted righthand door for MF 265 Sankey cab. Have tried Conaty,s

DirtyDiesels · 29-11-2009 11:54am

must be chrome a bar in good cond with no dents.

WestWicklow1 · 29-11-2009 6:54pm

WestWicklow1 wrote: »

I am looking to buy a short wheelbase series 70 Landcruiser aged from about 1988 to 1995.

The condition of the engine and/or gearbox is not important. In fact if they're snookered all the better because you'll be looking a lot less for it.

The body and chassis MUST be in good condition. Please don't offer me any rust buckets (I already have one).

Got one today on www.donedeal.ie

bogmaster · 30-11-2009 6:24pm

wanted herbst difco 6 sod cutter

the peace · 07-12-2009 5:59pm

hello,
i'm looking to buy mf 50 4x4 year 1985 to 1992.
engine and hydraulic should be very good with none welding for the body and chassis.
i'm looking to buy more than one.

regards

ger34 · 08-12-2009 10:07pm

Anyone know what you call the adjustable support/jack i've seen used when a 40ft is unhitched from tractor unit and is being loaded whithin by a forklift?They have 2 pneumatic wheels if thats any help.
Also where can i buy them?

Landyaddict · 09-12-2009 3:08pm

Need to get some bulkhead welding done on the Land Rover.
Can anyone recommend a welder who could quote me for the job
Its small, passenger side foot well and the piller mounts, I have the parts.

Thanks
Landy

Based in Naas

bogmaster · 02-01-2010 3:23am

looking for a 6 sod herbst cutter condition not important

phil c09 · 02-01-2010 3:52am

hey looking to know does any one have left and right wings for a diahatsu fourtrack 94 long wheel base but i think any year from 92 on will fit would be gratefull if any one could help me out.

masteroftherealm · 02-01-2010 10:15pm

Looking for an early or mid 90s' Landcruiser 80 Series Auto.
Any pointers?

Cheers Lads

gn3dr · 05-01-2010 2:50pm

Looking for a Range Rover p38 2.5 Diesel manual. Anyone have one for reasonable money?

Landyaddict · 05-01-2010 2:57pm

gn3dr wrote: »

Looking for a Range Rover p38 2.5 Diesel manual. Anyone have one for reasonable money?

http://adverts.ie/146414

Not sure if this is still available
or this one

http://cars.donedeal.ie/for-sale/cars/1089088

hope this helps

Landy

gn3dr · 06-01-2010 12:48am

Landyaddict wrote: »

http://adverts.ie/146414

Not sure if this is still available
or this one

http://cars.donedeal.ie/for-sale/cars/1089088

hope this helps

Landy

Thanks - saw those - that first one is an auto - and I think he's looking for too much for a P38 with air suspension issues - they are easy to sort out but will cost soemthing. I think these are good machines but some guys really have an overinflated perception of their worth???

The second one is on my list should nothing requiring no work come up

oflynno · 06-01-2010 12:36pm

i am on the lookout for a 00 crewcab 4x4,or earlier year within reason

goondakid · 11-01-2010 1:30pm

im lookin 4 a john deere 20 series or my consider a clen 6910 preferible 50k reasonabely priced year 2001-04

DanFindy · 13-01-2010 4:53pm

Lookin for a door for an international 785 with the xl cab, clutch side, must be straight and preferably with glass although anything considered

Wainwright09 · 14-01-2010 11:24am

Hi
have an old tractor that i want to put an air seat into.I priced them and there to pricey to justify.So im thinking that an air seat out of a truck might do or at least maybe the mechanism itself and i can then fit my own seat on top of it.The compressor would have to be 12v.Any ideas where i could get something like this?

goondakid · 19-01-2010 9:20pm

Im lookin for a john deeres 6910, 7710, 7810, 6820. 6920, 6920s. wit relatively low e.g nothin more then 6000hrs prob wil purchase wit the the nxt week or so.... Pm me if u hav a tractor 4 sale

may consider new holland tm 150 and up

if anyone has advice on these models i would lik to hear about them the pro's and con's

cheers thanks 4 er help

Eric Cartman · 15-02-2010 6:01pm

looking for a crewcab 4x4 pickup from 2004 onwards, Must be automatic with leather full spec etc... offering part exchange with my kia sorento (see my ad) or may offer full cash , particularly interested in a D-Max, Hilux or similar

oflynno · 19-02-2010 11:00am

oflynno wrote: »

i am on the lookout for a 00 crewcab 4x4,or earlier year within reason

anybody,there must be one somewhere
would also consider a diesel estate octavia,a4,passat,golf blah,blah,etc

BENDYBINN · 23-02-2010 12:44pm

Looking for gearbox to suit massey fergusson 265
or some one to repair orignal one

colm_mcm · 25-02-2010 10:28pm

Looking for a LWB Land Cruiser, anything from 2005-2008 will do as long as it's low mileage and clean.
VAT not important, but needs to have had an easy life and be tidy.

shivs1999 · 06-03-2010 12:36am

Looking for buckets for a ford digger, 2' to 2.5' and a 3' grading bucket would be ideal but will consider others.
may also consider buckets from other makes which may fit with some adjustment. let me know what you have.

engrish? · 06-03-2010 5:59pm

Hey

I have a cover for the back of my Navara like this one

and I would like to swap it for one like this

is there anyone here who would do that? Can anyone recommend a site or place that I could find someone who wanted to do that?

Slidey · 06-03-2010 6:01pm

Try www.adverts.ie, it is free and you can use your username from here. Do take a few minutes to read the Terms & Conditions before you put up your ad though

The Nutty M · 06-03-2010 7:45pm

shivs1999 wrote: »

Looking for buckets for a ford digger, 2' to 2.5' and a 3' grading bucket would be ideal but will consider others.
may also consider buckets from other makes which may fit with some adjustment. let me know what you have.

What size pins are in the ford buckets??

simmental · 07-03-2010 4:24pm

shivs1999 wrote: »

Looking for buckets for a ford digger, 2' to 2.5' and a 3' grading bucket would be ideal but will consider others.
may also consider buckets from other makes which may fit with some adjustment. let me know what you have.

I have a 2' ford bucket that was modified to fit an International digger. Could easily be changed back I would think. It's in good condition.
Pin sizes appear to be 1.75" (there is some wear on them) Can send photos if interested.

Slidey · 07-03-2010 4:44pm

simmental wrote: »

I have a 2' ford bucket that was modified to fit an International digger. Could easily be changed back I would think. It's in good condition.
Pin sizes appear to be 1.75" (there is some wear on them) Can send photos if interested.

Take it to PM please lads

kenneths · 14-03-2010 12:48pm

i'm looking for a Range Rover Classic will travel anywhere for the right jeep
preferably a diesel with manual box & commercial
so keep the eyes peeled for me
Cash burning a hole...

Landyaddict · 30-03-2010 7:46pm

Looking for a Land Rover 90 or 110, these were around in the early to mid 1980's.
An old Farm hack would suit, A DOE or NCT failed one also
Not looking to spend much on this, it's does need to be pretty just driving.

Any help would be great

Thanks
Robbie

Landyaddict · 07-04-2010 3:36pm

Landyaddict wrote: »

Looking for a Land Rover 90 or 110, these were around in the early to mid 1980's.
An old Farm hack would suit, A DOE or NCT failed one also
Not looking to spend much on this, it's does need to be pretty just driving.

Any help would be great

Thanks
Robbie

I got sorted on this, will be collecting this weekend

Robbie

NewHollandman · 08-05-2010 12:31am

Hi

I am looking for a New Holland 110-90 tractor from 2002 to 2004 must be a blue model

Anyone know a good clean one for sale ? in uk or ireland if possible .

Very gratefully for any help !

Thanks

kincaid · 08-05-2010 8:33am

any price range on this??

NewHollandman · 09-05-2010 6:53pm

kincaid wrote: »

any price range on this??

All depends on year,condition and hours ! Have you one for sale ?

me_right_one · 15-05-2010 8:46am

Hi. I'm looking for a MF 1135, preferable the standard 8 version

blackiebest · 29-05-2010 6:52am

Hello all,
I am looking for a set of rims for my hilux, 15" X 10" min as am putting on 33" grabbers. Happy if they are not alloy as ideally I will finish them in a matt black. My original 15" are a little narrow for the tyres I want

oflynno · 31-05-2010 8:32am

Hey guys n gals

i am looking for a toyota dyna
early to mid 90s
cheap-one in need of help would do

also looking for a toyota hilux 4wd,body can be wrecked but running gear good

give an auld yoke a new home

Claasman · 08-06-2010 11:58am

NewHollandman wrote: »

Hi

I am looking for a New Holland 110-90 tractor from 2002 to 2004 must be a blue model

Anyone know a good clean one for sale ? in uk or ireland if possible .

Very gratefully for any help !

Thanks

Its a bit far away, but it looks like a very good example...

http://www.trademe.co.nz/Business-farming-industry/Farming-forestry/Tractors/51-150-HP/auction-294657759.htm

Cmar-Ireland · 09-06-2010 3:25pm

Hi All,

Looking for a 01 or 02 Landcruiser D4D. Passenger version. Auto with a sunroof. North or South.
Going to be turning it into a commercial.

Thanks

wildefalcon · 12-06-2010 4:11pm

Hi, I'm looking for the top rail/vent panel from a landrover Defender or series. Condition of footwells, pillars irrelevent.

It's going to be used to build a vent panel for a Lightweight/Air Portable Landrover.

PM if you have something.

WildeFalcon

Slidey · 12-06-2010 4:14pm

In the market for 2 front calipers for a 4x2 Dmax.

Apparently the 2 wheel drive ones are different to the 4wd

shogunpower · 12-06-2010 11:59pm

looking for a rear left taillight/indicator for a 1997 shogun,
a front right indicator for same jeep,

an a-bar with 2 spotlights, has to be chrome,

all second hand perferably

The **WANTED** Thread

Comments

The WANTED Thread