I_HAVE_NO_NAME wrote: » I hate to reignite the FUP chat on this thread but I just got off the phone with a man from Regional Broadband after seeing an advert earlier today. Their website says 'No hidden charges, Unlimited Broadband'. The assistant on the other end of the phone when asked bluntly "do they enforce a FUP of any sort like the other ISP's?" said 'No we most certainly do not. We understand that if you are receiving speeds of 1000Mb/s then you could theoretically reach your cap in under a day of use. We provide fully unlimited service.' That being said from what i can see on the openeir site, they're not yet listed as a FTTH reseller. Has anyone heard any stories regarding this ISP?http://imageshack.com/a/img923/5769/MCtPCK.jpg
Gooser14 wrote: » Page 5 states minimum internal diameter of 32 mm so 25 mm I.D. won't do.
plodder wrote: » Attached.
Gipo3 wrote: » Is there a link?
plodder wrote: » Openeir's "Guidelines for Customers when laying Ducting (Hydrodare) for Telecom Networks on their private property"
Gipo3 wrote: » What are you basing that off?
plodder wrote: » They want 32mm internal diameter minimum. There's a reference also to wanting 1 metre radius "slow bends" to ease drawing the cable through, but that doesn't sound like a hard requirement.
The Cush wrote: » No, they will only connect your house if it's on the rollout plan. Check your eircode on the fibre-rollout site and have a look at the fibre-rollout map, does your house have a blue planned icon on it?
Decoda wrote: » So after a long wait Fibre has finally arrived. When it was first mooted, I was extremely skeptical. I live in an isolated part of the country by the coast on a cul de sac road with 10 houses, the majority being holiday homes. I just couldn't see how it would ever make financial sense for any supplier to bring fibre broadband to my locality and yet here we are. At the moment the modem is temporarily left in the attic until I decide whether to permanently leave it there or relocate downstairs. If I do decide to leave it there then I will add a mains smoke alarm up there along with an additional power point to run a TP Link power-line system from. (At the moment there is the EIR Hardware box plugged direct into a socket and the Eir Modem and a TPLink plugged into a double adapter - temp measure until my electrician gets here) I've been a thread lurker for a long time so many thanks for all the information along the way and the best of luck to those of you waiting for connection. D. Set up in the attic Final Speed Test taken downstairs in the hallway....:P External Shots of Installation Its kind of hard to make out but the fitter brought the fibre approx halfway down the pole before bringing it across to the house. I plan on running some form of steel cable maybe??? to reinforce or provide some additional protection to it as I feel that it is sort of exposed. Where the fibre enters the house through an air vent.
cnocbui wrote: » I gather they don't run cable to a chimney?
I have a pole. The existing phone line is through 13mm conduit from the foot of the pole with some bends in it, so I doubt that is usable. What radii can the cable be bent?
Would the installers leave a roll on the poll and be prepared to come back and finish the installation after the cable mysteriously found it's way to the chimney , through the attic and out the wall where the existing phone socket and router are located in the middle of the house?
Jpmarn wrote: » Contacted Eir through web chat and I am down for the same day 11 October. My brother has ordered the ftth in the last week and he's down for next Thursday 12th. Is there still a restriction on the amount of fibre cable that can come into the house. I'm hoping to get in under the stairs off the hallway where I have the router and network center there?
rob808 wrote: » I made a mistake still Wednesday but not to long to go
Gonzo wrote: » the possibility you may have a sleepless night on Sunday!
rob808 wrote: » My install date got bump up to this coming monday hope everything go well is there anything I need to know before the install thanks.
bfa1509 wrote: » Hm, I had lads from Openeir in the house the other day fixing a phone fault. I asked them who installs the ONT and they told me it was KN. Maybe they were telling fibs out of fear of me asking them to do it for me.
oscarBravo wrote: » Nope. The ONT is open eir's, it has nothing to do with the retail provider.
addict wrote: » Your ONT will be changed for digiweb one
d31b0y wrote: » Same boat here re ducting. I sent KN an email to see if there is any interest in doing the work. I'll report back if they get back to me. I sent it to the general KN info address so if someone has a contact email for someone who is involved in the actual FTTH role out within KN, I'd be interested in getting it.
sean72 wrote: » Is anyone here in the same 1km range from the cabinet, surely you can't be forced to take a FTTH plan when 150 mb/s limit is not obtainable on FTTC. Anyone dealt with this situation?
