Quality Airsoft Supplies

Arkslippy · 21-03-2011 12:07am

TNTQ wrote: »

Think have left 2 Black and Tan for 60E each.

Hang on, is that a peq box with laser built in that works and space for an aeg battery

TNTQ · 21-03-2011 12:36am

AGB_Ghost wrote: »

Metal please, but im not limited so Plastic will be fine, could you throw in a all the parts like charging handle dust cover mag catch etc pretty please with BB's on top , also wondering if you have a SIG 556 or can get one in, my team mates are using me like a gun mule to message you guys nonstop

I can do that for you:) Don't have Sig 556, but will ask about one.

Arkslippy wrote: »

Hang on, is that a peq box with laser built in that works and space for an aeg battery

It's just aming device, no battery compartment. You could use low profile 7.4v lipo in the front rail.

TNTQ · 21-03-2011 3:02am

AGB_Ghost wrote: »

Perfecto mundo Senor (Spanish test tomorrow, will be drawing AEG's on my desk :rolleyes:) and once my project is completed I will bring it down to you for a chrono, it`ll apparently fire 25 BB's a second :cool:

No hay problema, amigo! What battery are you using to get 25RPS?

Blazer · 21-03-2011 9:27am

TNTQ wrote: »

Think have left 2 Black and Tan for 60E each.

cool..so how do I get one?

I'm down in Limerick so calling into ye is not an option and I didn't see them on the site...
I take it ye have paypal and we can do it that way?

TNTQ · 21-03-2011 10:06am

Sc@recrow wrote: »

cool..so how do I get one?
I'm down in Limerick so calling into ye is not an option and I didn't see them on the site...
I take it ye have paypal and we can do it that way?

Yes, Paypal is a solution. I'll have a look tomorrow and see if sitll have some boxed. If not, there are going to be display models avaliable.

br,
Mike

clubberlang12 · 21-03-2011 7:41pm

Charlie, since ye are moving, what address will i send that spring to? Or will it be alright to send it to the Carlow address?

TNTQ · 21-03-2011 9:31pm

AGB_Ghost wrote: »

No Idea, battery is last on my list of stuff to get :rolleyes:

Are you building a gun which is going to be firing 25RPS?

clubberlang12 wrote: »

Charlie, since ye are moving, what address will i send that spring to? Or will it be alright to send it to the Carlow address?

Send it to Carlow, please.

RebelSniper · 21-03-2011 10:10pm

How much is it for a camo done by the one and only TNT, I wanna get my M4 done.

TNTQ · 21-03-2011 10:49pm

AGB_Ghost wrote: »

with hopes, yes.

The battery in my eye is an 11.1v

My another question is: Only 25RPs on 11.1v????? :eek:

RebelSniper wrote: »

How much is it for a camo done by the one and only TNT, I wanna get my M4 done.

What camo?

RebelSniper · 21-03-2011 11:57pm

Yous do custom camos in your place, one of the MODs got his FAL done?

TNTQ · 22-03-2011 12:05am

AGB_Ghost wrote: »

I dont know, ill bring it down, throw the motor and gearbox in and you pick out the batteries and we will make something beautiful together

What gearbox do you have for it?

RebelSniper wrote: »

Yous do custom camos in your place, one of the MODs got his FAL done?

Yes, but question was: What kind of camo do you want? What pattern? How many colours?

TNTQ · 22-03-2011 12:39am

AGB_Ghost wrote: »

I have a Bravo Complete Gearbox (rear wired) on hold for it, since im getting a crane stock by SOCOM Gear or VLTOR for it, still picking, still picking out a motor though.

Put G&PM120 into it and MOSFET A+B.

RebelSniper · 22-03-2011 8:24am

Oh right, I want a 2 colour woodland done on my M4, keepin it simple here, how much would it be?

TNTQ · 22-03-2011 9:18pm

RebelSniper wrote: »

Oh right, I want a 2 colour woodland done on my M4, keepin it simple here, how much would it be?

60E.

Evade · 22-03-2011 9:21pm

What time are you open at at tomorrow?

GarethQ · 22-03-2011 9:23pm

Ill think about it lad.

TNTQ · 22-03-2011 9:45pm

Evade wrote: »

What time are you open at at tomorrow?

From 11am.

Evade · 22-03-2011 9:47pm

What time are you closing at?

TNTQ · 22-03-2011 9:54pm

Evade wrote: »

What time are you closing at?

We'll be there all day till 6 mate

Evade · 22-03-2011 9:56pm

I should be up in the afternoon then.

TNTQ · 23-03-2011 9:06am

AGB_Ghost wrote: »

Any news on the lower receiver? got my upper today

I've the lower reciver for you man:)

Lads,

We still have some stuff that have to go before we move. Please register your intrest to avoid any disapointment.

br,
mike

TNTQ · 23-03-2011 2:37pm

AGB_Ghost wrote: »

Awesome!

Heres the things I need:

Dust Cover Set, Bolt Cover, Forward Assist Knob, Metal Cocking handle, ordnance Latch, Bolt Stop, Selector, Fixed Bolt of the Body, Ejector Window, Anti-rotation Pin.

How much we talking about for a lower and this stuff?

To be honest. You come up, when we are in Dublin and look for it yourself:)

Leftyflip · 23-03-2011 4:44pm

Regarding the pm - sluts :mad:

TNTQ · 23-03-2011 5:13pm

Leftyflip wrote: »

Regarding the pm - sluts :mad:

Love you too honey...

Wonders *is this grooming?*

Leftyflip · 23-03-2011 5:16pm

TNTQ wrote: »

Love you too honey...

Wonders *is this grooming?*

Is it? *ponders*

thebillynator · 23-03-2011 5:22pm

You wouldn't happen to have a dboys M4 upper receiver lying around would you?

TNTQ · 23-03-2011 5:24pm

thebillynator wrote: »

You wouldn't happen to have a dboys M4 upper receiver lying around would you?

I'd say so but its prob been boxed up at this stage mate :rolleyes:

thebillynator · 23-03-2011 5:26pm

Damn

let me know if you find one. Thanks

TNTQ · 23-03-2011 6:50pm

AGB_Ghost wrote: »

I need some help with my Upper reciever, just need to get my Ejection pin/ button to stay in, any tips? :P (long day at school = no brain power for assembly by myself) just like this picture. without the dust-cover of-course

You need to swap it for other type that allow for dust cover to be closed. It's stuck against the gearbox.

TNTQ · 23-03-2011 9:41pm

AGB_Ghost wrote: »

You sure? when I look into the hole its just hollow and isnt connected to anything, just to be clear were talking about this :P

I think it's called forward assist, but any way. Is there a whole in the button, like a cut?

Btw is that picture of the same body you have?

Scody94 · 23-03-2011 9:49pm

Hey lads

bit of an odd one

have you any spare hex screws for a magpul pistol grip.
i took mine of and cant seem to find where i left them

Sean

TNTQ · 23-03-2011 10:04pm

Scody94 wrote: »

Hey lads

bit of an odd one
have you any spare hex screws for a magpul pistol grip.
i took mine of and cant seem to find where i left them

Sean

No sure, probably. However, all stuff is in the boxes

AGB_Ghost wrote: »

yes there is kind of like a section has been cut away on the smaller end, and no, but it is a VLTOR, but its Pin slot is in the front not the rear, ill get a pic up of my actual upper soon enough for you.

Do you have the same body as on the picture? I mean exactly the same with that single lip for the pin in the back? Look on the body before you answer. Best thing to do, is take photo of your Upper Reciver. The picture you have here is GBB Upper Reciver.

Scody94 · 23-03-2011 11:25pm

TNTQ wrote: »

No sure, probably. However, all stuff is in the boxes

im after the longer of the two. i have a spare small standard M4 one but am in need of the longer hex. whenever you know could you please let me know

thanks
Sean

Blazer · 24-03-2011 12:35am

hiya guys...any joy with that black VFC PEQ box? (laser+illuminator)

12gauge dave · 24-03-2011 4:39am

hi im new to airsoft basically but have real firearms if that counts for anything in the airsoft world:D and im looking around at all different websites and guns etc

im very keen on your custom barret .50 caliber aeg sniper rifle:)

its a beauty just wondering does it come with a charger and everything i need to go plinkin away without any worries:D

is it low maintenance as i dont want to have it breaking down after a week as ive had a co2 cannister airsoft desert eagle that broke inside of a week:mad:

so any info would be more than thankful and remeber you are talking to a complete airsoft noob basically:D

TNTQ · 24-03-2011 9:01am

Sc@recrow wrote: »

hiya guys...any joy with that black VFC PEQ box? (laser+illuminator)

Yes we have one.

TNTQ · 24-03-2011 9:03am

12gauge dave wrote: »

hi im new to airsoft basically but have real firearms if that counts for anything in the airsoft world:D and im looking around at all different websites and guns etc

im very keen on your custom barret .50 caliber aeg sniper rifle:)

its a beauty just wondering does it come with a charger and everything i need to go plinkin away without any worries:D

is it low maintenance as i dont want to have it breaking down after a week as ive had a co2 cannister airsoft desert eagle that broke inside of a week:mad:

so any info would be more than thankful and remeber you are talking to a complete airsoft noob basically:D

Was tested and we don't expect anything happening to it. We can include battery and charger for you.

br,
Mike

Blazer · 24-03-2011 9:50am

TNTQ wrote: »

Yes we have one.

ok..so can I order from the site or pm me your paypal email and sort it out that way?

TNTQ · 24-03-2011 2:04pm

Lads,

Shop in Carlow is now CLOSED.

Myself or Mike can still be reached on... 085 7037423 and 087 9386859

Should have everything moved and operational in a week/maybe two.

Stay tuned for more info.

Blazer · 24-03-2011 2:32pm

don't forget to post my peq box

and best of luck with the shop move..really must call up for upgrades

TNTQ · 24-03-2011 2:45pm

Sc@recrow wrote: »

don't forget to post my peq box
and best of luck with the shop move..really must call up for upgrades

Have it packed. Will go to post them shortly.

TNTQ · 24-03-2011 10:04pm

Goes like that, very, very simple.

Spring goes first on the forward assist. Then you put forward assist into the whole. Last thing you do is drive the pin into the opening.

Make sure that sring support on that pin. Pin has to go trough whole in the cut in the button. Cut is asymetic so it only works one way.

See picture below.

TNTQ · 24-03-2011 10:32pm

AGB_Ghost wrote: »

We have one problem, spring is too small to fit on the forward assist

Then you need different spring or different forward assist.

se conman · 24-03-2011 10:39pm

Best of luck with the move lads.

TNTQ · 24-03-2011 11:04pm

AGB_Ghost wrote: »

^
|
|

This is why I shop at TNTQ, nicest guys ever and actually care about their customers, if you guys need help with the move and putting stuff up and away let me know and I'll be up to your new place will bells on.

Some one might think we have nothing better to do

br,
Mike

M4A1guy · 24-03-2011 11:11pm

hey guys

any chance you have one of these that would fit a dboys m4 cqb-r? id need the whole lot of it but hit me back with whatever ye got

thanks

J.D.R · 26-03-2011 12:49pm

PM in bound

deepimpact · 27-03-2011 6:46pm

Guys, I got the barrels last Thursday. Thanks.

Do you have 280mm 6.03mm tightbores for a Cyma AKs74u?

walks86 · 27-03-2011 10:41pm

hey guys,

just wondering how much for a guarder clear hop rubber posted to dublin (snail mail)

and how long are your 7.4 Lipos? (need to see if it will fit in the stock tube on my gun!)

elDiablo79 · 28-03-2011 8:12pm

alri lads i know ur up 2ur balls wit the move but just wondering did you get my PM? cheers.

Quality Airsoft Supplies

Comments