If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)

Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.

Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

DIY parallel bar plans

Doctor_Socks · 2012-06-21 12:42:42

Has anybody here ever built parallel bars and have plans for them? Something like whats in the top picture here: http://www.gymnasticbodies.com/forum/viewtopic.php?f=10&t=1348 It's something i'd like to start as i've gotten back into using my gymnast rings again and I find it alot more enjoyable then constant barbell work!

21-06-2012 1:42pm

#1

Doctor_Socks

Registered Users Posts: 337 ✭✭

Join Date: February 2008

Posts: 281

Has anybody here ever built parallel bars and have plans for them? Something like whats in the top picture here:

http://www.gymnasticbodies.com/forum/viewtopic.php?f=10&t=1348

It's something i'd like to start as i've gotten back into using my gymnast rings again and I find it alot more enjoyable then constant barbell work!

0

Comments

#2 21-06-2012 2:19pm

rubadub

Registered Users, Registered Users 2 Posts: 32,382 ✭✭✭✭

Join Date: July 2002

Posts: 31649

Do you really need full length bars? I have seen them made from scaffolding. I guess you might get some items from a scrap yard, once there is any damage to scaffolding I guess it must be condemned but would be fine for our usage.

If they are not very long I have seen people make them for strong PVC tubing.

I made a V shaped dip station similar to this.

It was off an old table. Just had to angle grind it and get one section welded on.

People have used saw horses too, you could use barbells as handles

or no need for bars.

0