Gas locker Vent

digger58 · 17-05-2015 6:46pm #1

Trying to get a new vent for the locker, the old one has disintegrated, the slot is 77 X 151, have been to 2 different dealers with no joy, even their brochures don't have anything close to this size. The old one clipped in, I can only get much longer ones, If I can't get anything closer to 150mm I'll just use a standard 260X90 flush mount
.DSCF1793.JPG

DSCF1794.JPG

17-05-2015 11:10pm

150mm x 75mm here

Much easier find a 6" x 3"

digger58 · 17-05-2015 11:56pm

Problem with that is the vent is just about the size of the cut out, unless it is designed to fit into the slot it wont have enough area to bond onto the surround. If it's flush fit it would need to be about 20mm longer and taller. Again I would prefer to keep it white.

moodrater · 18-05-2015 11:27am

Sounds like the dimensions of a flat duct vent. You can get them in b&q as part of a kit not sure if they sell them individually.

http://www.naplesuk.com/vent-louvred-and-damper-150mm-x-70mm-terracotta.html?source=googleps&gclid=CjwKEAjwm-aqBRD39YPqhbzthzYSJACFj-AtQ3aEhm1KM2JntJHGsNwKHhPcSs-PrjlhLDZbGej_lRoCSeHw_wcB

digger58 · 18-05-2015 6:08pm

Thanks, that one is showing as terracotta, Was in B&Q today and didn't see anything like that.

moodrater · 18-05-2015 8:45pm

They have all four colours but the postage is a bit steep:
http://www.naplesuk.com/vent-louvred-and-damper-150mm-x-70mm.html

B&Q one is in the cookerhood kit I used think this is the one:
http://www.diy.com/departments/manrose-white-cookerhood-vent-kit/258744_BQ.prd

They also have the similarly sized one:
http://www.diy.com/departments/manrose-white-louvred-vent-h76mm-w229mm/257901_BQ.prd

digger58 · 18-05-2015 8:50pm

Thanks for that, how did you get the colour option? Couldn't find how to change from terracotta. Yes P&P is obviously arranged by Dick Turpin.

Gas locker Vent

Comments