ronanc1000 wrote: » Is the minix still the best out there? Currently €150 fully loaded around. Ended up canceling my wetek order. Still unsure. Getting fibre broadband during the week so should make a difference.
The_B_Man wrote: » Lads, how much of a deal breaker is 1gb of ram? I saw an android satellite box last week somewhere (possibly here) and was considering it to replace my current one so I can have satellite and kodi, but it only has 1gb of ram.
Invincible wrote: » MINIX x8H plus €134.90 on Amazon.De.
zerks wrote: » Is this it?http://www.satworld.ie/amiko-a3-silver.html
dave_t wrote: » Has anybody had the red light issue with the Beelink X2? It seems bricked. Won't turn on. I've tried to flash firmware on it but I am getting "Burn firmware failure". Not sure what to try now. Probably just get a refund but would like to avoid trying to get one from Gearbest if possible.
Allyall wrote: » Have you a USB Type A to Type A cable?
dave_t wrote: » Yes, I was using that to try to flash it with Phoenix Suit
Allyall wrote: » Have you image 106k4? and what error are you getting - Burn image failed (or similar)? Are you pushing reset button as you attach it?
dave_t wrote: » yes, I've tried all the methods I can find. I get the option that I should in order to flash but it seems to disconnect and fails at 7% with "Burn firmware failed" message. I was trying with 203k4 and a custom rom that I found.
Install phoenix card. Get 16gb or 32gb class 10 sd card for fastest speed. In phoenix card choose rom. Check startup instead of product. Product is supposed to create sd that flashes box automatically. Also fails to flash. Startup option creates bootable sd. Box runs quite well off sd and I have 29 gb internal space for apps..lol.. I used superceleron rom in sticky. First boot is longest due to setup . After take 1min30 to boot with a few apps installed. Once flashed sd is in just turn on box with remote and wait for setup and box to reach main screen.
Allyall wrote: » In broken English, but seems to have worked for others with the same problem.http://freaktab.com/forum/tv-player-support/allwinner-tv-players/531151-x2-h3-box-images-customized-for-freaktab/page6 In particular:
dave_t wrote: » Thanks, I saw that already too. If I had an SD card I'd try it but I waited a few days for a USB cable and that didn't work so might just be forced to get a refund at this stage. It's a Xmas present so need to try to find another box to order now that might be more reliable. Appreciate the help anyway. Cheers
Allyall wrote: » They may give you a refund, but they'll wait until they receive it back first. (Quite pricey to ship to China). Try 106k4 in Phoenix Suit as a last attempt.
dave_t wrote: » I just tried 106k4 and 104k4 after you mentioned it awhile ago. No good. Same issue with all of them. Frustrating.
Allyall wrote: » Did you try this? I've one of these arriving tomorrow for my Mothers neighbour. I'll be doing the same, So I'm sure I'll have the same issues. I'll be trying all of them anyway, because unlike some, I'm not a fan of the OTA updates, not without an option anyway. That said, whatever is causing the issue, I'm sure they'll release a fix pretty quick. That box has been heavily supported by Trigtop and the other guy since it was released.
Allyall wrote: » Did you format it first? I know it's not necessary, but it may help. Then power button repetitively while connected, until it is detected. I know you've read it, but that seems to be literally the last step, and the one with most success rate between the three threads.
Invincible wrote: » It was probably the Wetek for €54 in the group buy organised in bargain alerts.
Dcully wrote: » Does the amazon firestick work in Ireland?
