Partymack wrote: » Lads, Any idea how to get the proper FF and REW buttons working on the AA2 running OATV? Just to clarify, not the < & >, the ones marked FF & RW. Can't seem to figure it out from menus so anyone figurded it out using keymapping and would they share the knowledge... Or even better the XML file? Cheers.
Slevster wrote: » Have a custom map which works for pli images. (Not at home atm, but if you search this thread or the firmware thread , for keymap attachment) May/may not work with opentv , but you could use it to alter/amend the opentv keymap
Slevster wrote: » Have you played around with the settings in system setup (eg output to pcm?) If you are viewing something with 5.1 , but not getting it, have a play with the channel output, switch between mpeg and acc After that, is your amp set to detect Dolby ? Have you the amp set to pro logic by chance (which may not give 5.1 on some amps , as opposed to pro logic II , but I could be mistaken on that)
Partymack wrote: » Cheers Slvester, Found your Keymapping file. I'll try it tonight on OATV. you would not believe how many arguments this might save me!
Partymack wrote: » Hey Slvester. Tried the Keymapping file but it put OATV in bootloop. When I compared the OATV file with Yours the formatting was a bit different. Basically the content was in reverse Thinking of using original OATV FILE as basis, making required edits and FTP back in. Question is what are the lines I need to change? Seems the file is arranged with headings (infobar, media player etc). Can you advise wher you changed the file to map the FF and REW keys?
Skippy along wrote: » Yeah I'm happy with the settings on my amp but when i go into the sound settings on my AA2 it's pretty limited in what i can do bar the PCM settings I'm using freshpots 4.5 image.
Slevster wrote: » When you say that you aren't getting 5.1,do you mean that you aren't getting "Dolby Digital" on the broadcasts which support it (not that many really)
Skippy along wrote: » Yeah not getting Dolby digital and yer right there's not that many of them broadcasting anyway.. I'll try an optical cable and see how that goes.. Thanks for help
mass_debater wrote: » Plenty are Dolby Digital, all Sky movie channels are
Cerdito wrote: » If you're using Hyperion I don't think there's a GUI way to schedule a reboot. Doing it via the command line (telnet) isn't too hard. Once you have telnetted in and are at the prompt type: crontab -l This will show you the list of scheduled jobs, mine had: spark7162:~# crontab -l */5 * * * * sync && echo 3 > /proc/sys/vm/drop_caches This is a job that runs every 5 mins to clear the cache I think, best not to touch this. To edit the scheduled jobs type: crontab -e You can then edit the file using the vi text editor, you might need to Google some tips for using vi. My crontab looks like this at the moment: spark7162:~# crontab -l */5 * * * * sync && echo 3 > /proc/sys/vm/drop_caches 00 04 * * * shutdown 55 03 * * * rm /media/hdd/crossepg/* I have a job that clears out the crossepg files at 03:55 and then reboots the box at 04:00 ("shutdown" reboots rather than shutting down). Separately in the Enigma GUI I have crossepg set to update at 04:10 and then the box to go into standby after that.
gar wrote: » Ran the crontab - l but I get a message saying no such file or directory exists. Must be a different directory than where it thinks it is. Will try again when I have more time. On another note the epg settings seem to reset to their default when I reset the box despite saving them... I think. Just a little annoying. Like when when I press OK on epg it zaps not zap and close. Thoughts?
Slevster wrote: » Am not familiar with oatv, but the following are the relevant lines from the map : <map context="InfobarSeekActions"> <key id="KEY_PAUSE" mapto="pauseService" flags="m" /> <key id="KEY_PLAY" mapto="playpauseService" flags="m" /> <key id="KEY_REWIND" mapto="seekBack" flags="b" /> <key id="KEY_FASTFORWARD" mapto="seekFwd" flags="b" /> <key id="KEY_REWIND" mapto="seekBackManual" flags="l" /> <key id="KEY_FASTFORWARD" mapto="seekFwdManual" flags="l" /> <key id="KEY_LEFT" mapto="seekBack" flags="m" /> <key id="KEY_RIGHT" mapto="seekFwd" flags="m" /> <key id="KEY_OK" mapto="unPauseService" flags="m" /> <key id="KEY_1" mapto="seekdef:1" flags="m" /> <key id="KEY_3" mapto="seekdef:3" flags="m" /> <key id="KEY_4" mapto="seekdef:4" flags="m" /> <key id="KEY_6" mapto="seekdef:6" flags="m" /> <key id="KEY_7" mapto="seekdef:7" flags="m" /> <key id="KEY_9" mapto="seekdef:9" flags="m" /> </map> <map context="MediaPlayerSeekActions"> <key id="KEY_REWIND" mapto="seekBack" flags="b" /> <key id="KEY_FASTFORWARD" mapto="seekFwd" flags="b" /> <key id="KEY_REWIND" mapto="seekBackManual" flags="l" /> <key id="KEY_FASTFORWARD" mapto="seekFwdManual" flags="l" /> <key id="KEY_1" mapto="seekdef:1" flags="m" /> <key id="KEY_3" mapto="seekdef:3" flags="m" /> <key id="KEY_4" mapto="seekdef:4" flags="m" /> <key id="KEY_6" mapto="seekdef:6" flags="m" /> <key id="KEY_7" mapto="seekdef:7" flags="m" /> <key id="KEY_9" mapto="seekdef:9" flags="m" /> </map> I just changed short press of ff or rw to seekfwd, or back and long press to ask for a minute jump. I.e the key_rewind and key_fastforward lines in both sections. However, i remember, when i first did it, i had to first create a blank xml file and copy and paste the code into it and save as . Because if i edited the orginal file and just saved the changes, it wouldnt taje effect for some reason.
zefer wrote: » Anyone notice that a load of channels don't appear when you do a satellite scan on 1 image compared to another? Hyperion 4.5 is the image I've noticed that channels not appearing/weaker signal. And some channels that do appear, the signal strength is much worse..
zefer wrote: » Nobody else?
cyndale wrote: » I've been using Zardoz's Hyperion V4.5 image since it was uploaded with no problems until now. When it starts uploading Crossepg it stops about 5 seconds in and freezes. Checked all the usual stuff, plenty of space on USB, settings haven't changed at all. What gives?
rb25 wrote: » I noticed this too but I put it down to the channels being there but not listed in the bouquet. When I used Dreamboxedit I was able to see all the channels and drop them into the bouquet. But on mine they don't necessarily show anything onscreen when I select the channel for viewing but do tune in when I scan.
dpjmie wrote: » Funnily I had the same problem a few days ago, delete all the epg files on the memory key (should be a whole folder full of miscellaneous epg.dat files) and then rerun the downloader and the epg should populate no bother, sorry If I didn't understand you right, I'm sleep deprived dpjmie
zefer wrote: » Hmmm, very odd. if I put open atv back on, all channels are there, so it isn't a satellite hardware issue. Even if I manually scan a frequency, it might find some channels but still might not tune anything in
Zardoz wrote: » I recall alanhiggy had the same issue a a good while back. He'd get a tune failed on certain channels on Hyperion but they worked fine on Openatv.
alanhiggyno1 wrote: » ya and still happening so am still on openatv.its a strange one
dpjmie wrote: » Funnily I had the same problem a few days ago, delete all the epg files on the memory key (should be a whole folder full of miscellaneous epg.dat files)...
