Imstuck wrote: » As far as I am aware it needs to be connected to internet for full epg to load. FTA EPG will be got from sattelite . Recordings do show up on hard drive (folder button on remote) although if you change channel it should tell you that there is a recording in progress on infobar. But recordings set are red, and indeed yellow when in progress. I
Imstuck wrote: » Yes, enigma images do contain airplay. @ mtoutlamonde Are you trying to record via aerial and watch another channel via sat cable ??
Imstuck wrote: » Have you got sat cables going into box from your dish?
mtoutlemonde wrote: » No taping FTA and tried the channel next to the one I'm taping. I did get a message that said tv was going to recording service but nothing happened or appeared to happen afterwards.
Fresh Pots wrote: » Have you both sat tuners enabled? If you do. Restart the box and try again.
Imstuck wrote: » Maybe there is an easy explanation for this..... One if the other lads might be able to help as I don't have saorview set up on mine, just the two sat cables. Did you run autobouqets?
mtoutlemonde wrote: » I presuming both are enabled as I wouldn't have disabled them. I restarted the box and same thing happens - message with 'in order to record a timer, the TV was switched to the recording service' and this shows for 20 secs but nothing on hard drive.
mtoutlemonde wrote: » Yeah there's something wrong with recording because I was taping an FTA and changed to another one so I don't know what's happening there. It is showing up in the timers as waiting.
superg wrote: » Possible your box has changed ip. Double check it.
how.gareth wrote: » no the box is still telling me the same ip, can anyone post the settings i should have in open webif please
mass_debater wrote: » Is the box answering pings on that ip? If not you have the wrong ip
how.gareth wrote: » How can I check that?
mass_debater wrote: » Open command prompt and type 'ping x.x.x.x' where x.x.x.x is your up address
how.gareth wrote: » I did that but not sure if it was successful, it's says sent 4 and recieved 4 but the time says 0ms
mass_debater wrote: » Yes, the time will be so small it will register as 0 milliseconds, replies are what you're looking for, you got replies. Check your web of settings, make site it's set to port 80. Did you try clearing your browser cache?
how.gareth wrote: » Port is set to 80. Just cleared and cache and still telling me "this Web page not available " very frustrating!
mass_debater wrote: » Did you try another browser?
how.gareth wrote: » Just installed another browser and still getting the same answer
