nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Child Item

Amiko Alien2 / SAB / GM / ST7162 ENIGMA Discussion Thread

championc

This thread is for discussion of the ENIGMA operating system on ST7162 Based Satellite & Terrestrial Combo Receivers

The boxes covered would be the
Amiko Alien2
SAB Unix Tripple
GM Triplex

Enigma is a Linux based alternative to the default Spark operating system on these boxes. Enigma is a more customisable OS and provides the ability to add plugins which can accomplish many tasks enabling users to have a box which might look and perform like a Sky box, giving a 7 day EPG and an alternative to series link

A detailed FAQ type post with most installation instructions is below in Post 2

**** Please note : the discussion of card sharing is prohibited in this thread and any such discussion may attract a ban from the moderator ****

Find more posts tagged with

amiko alien2

enigma2

Quick Links

Comments

Zardoz

alanhiggyno1 wrote: »

anyone have a working image of openatv 4.3 for alien 1

I have one ,will upload it when I have time.

alanhiggyno1

anyone have a working image of openatv 4.3 for alien 1

deezell

Wexford Warrior,

If you've manage to ftp your bouquets from the DB box to dreamboxedit, you should have three panes, left pane is all the channels that are stored in the tuners, terrestrial and satellite, right pane (ITA!), is the list of bouquets on your dreambox, usually starts with a label, 28,2 followed by all the Sky groups, followed by all the E2 bouquets, including favourites. Clicking one of these will display in the middle pane the channels tha tare in that bouquet. You can create a new bouquet on the right pane, right click to bring up menu. Or just edit the favourites one, rename it if you wish. You can pick up channels from the left pane or copy blocks of channels from other bouquets in the middle pane and paste them in your bouquet. You'll get the hang of it. The important thing is to click the SAVE icon, upper left which stores a local copy of your new settings to the PC. Then you click the FTP to the dreambox, which copies the saved files over the ones on the box. Finally, you can click the reboot icon to restart the Db with the new bouquets. If you've created a new bouquet or edited an existing one, put this at the top of the left pane over the sky lists, that way the buttons on the remote will correspond to your channels. Turn of autobouquets to keep it this way Also if you've created a new one, you'll need to select this after startup, pick a channel, and make this the default on startup.

Imstuck

deezell wrote: »

Tip of the week, use the media browser as a file Manager.

Eh???

My friends cross epg isn't working, said I'd go over at some stage to ftp for him, I'm not too bright but he is worse!

Does the above mean I can delete crossepg file without ftp????

Simply deleting them off your folder (as suggested recently on this thread) doesn't work for me

mass_debater

lensman wrote: »

What P's me off is how crossEPG can work 100% for months & suddenly stops, I've tried all the suggestions & it still refuses to download/display epg data, Saorview channel epg is fully populated with info but not satellite on 28.2

Saorview EPG is loaded with each channel press, does not use Crossepg. When you have a working Crossepg you need to delete the .dat files every week or two or it gets bloated as it does not overwrite but ads to a growing file causing the problems you are seeing

Gerry Wicklow

lensman wrote: »

What P's me off is how crossEPG can work 100% for months & suddenly stops, I've tried all the suggestions & it still refuses to download/display epg data, Saorview channel epg is fully populated with info but not satellite on 28.2

This is a bit of a long shot but a long time back people were using a version of the satellite.xml file which didn't include the data TP info for the EPG. Result CrossEPG would appear to run but not get any data.
If you can have a look through it and check it as an entry for
11428 H 27500 the Freesat EPG TP
11778 V 27500 Sky EPG TP

Satellite.xml is in /etc/tuxbox

WexfordWarrior

superg wrote: »

Not sure to be honest. Picon's always just worked for me without me doing anything of note. I copy the picons folder to the root of the harddrive and they just show up, thats with open atv images which is what you have and Hyperion 4.5 images which Is what is on my Alien 2 at the moment.

Don't know whats up with the Saorview either I'm afraid.

OK Thanks everyone for your help. I'm trying everything suggested but hitting my head against a brick wall at the moment.

Where do I get the Picons folder from? Also the same for the Bouquets list?

I presume once I have them on a usb the files will be picked up on once i insert into the box automatically? Sorry for being a pain in the ass but I'm virtually clueless!

At the moment, I have the open pli night skin. It looks great and the cross epg is working fine.

I just need to sort out my irish stations working within the channel list.

I know I've to update the favourite channels from dreamboxdedit but where do I get the initial file to put into it? Is there a file online of the channel list I can download so I can then edit within the dreambox editor? I'll try figuring out how to FTP it after that!!

Thanks again!

lensman

What P's me off is how crossEPG can work 100% for months & suddenly stops, I've tried all the suggestions & it still refuses to download/display epg data, Saorview channel epg is fully populated with info but not satellite on 28.2

deezell

mass_debater wrote: »

You don't even need to ftp to delete it, just press play to open recordings and navigate from movie up a level and then into Crossepg and press red to delete the two EPG files then navigate back to movie.

Tip of the week, use the media browser as a file Manager.

mass_debater

hallo dare wrote: »

FTP to your box and delete the epg.dat file and everything that's in your crossepg file. Then rerun crossepg.

You don't even need to ftp to delete it, just press play to open recordings and navigate from movie up a level and then into Crossepg and press red to delete the two EPG files then navigate back to movie.

hallo dare

deezell wrote: »

I've this problem too, cross epg has a mind of its own. I'm a month tinkering with E2, during that time the cross has come and gone. If I press download it says downloading, then after a while it stops and goes back to menu. I no longer get the messages, loading, parsing, etc. I've tried setting storage to a usb, HDD, flash. My network is good, can ftp. I've turned off autobouquets, so my epg is steady on my custom bouquet. I've changed the EPG. source from open 28.2. To Xrd or something, UK channels. This actually worked for a while, but now all my sat channels are blank. Should I delete and reinstall Cross epg, and delete EPG.data using DCC, then reinstall cross.

FTP to your box and delete the epg.dat file and everything that's in your crossepg file. Then rerun crossepg.

deezell

WexfordWarrior wrote: »

SuperG, you're an absolute gentleman/woman and scholar! That has worked

Also, the Irish channels do not work. They have been found but no picture shows.
I am setting this up for my pensioner parents and trying to have things as clean and simple as possible for them.

Thanks again for any help.

Just. A thought on the irish channels, I thought I had this problem, until I discovered that the epg would revert to 28.2 bouquet if I pressed the numbered buttons or the channel shift. I'd press 2, would end up with Rte 2, no picture, because I was now on the astra28.2 Rte, not the saorview terrestrial, which was in by own custom bouquet. It was only when I got more familiar with the epg and the bouquets that I realised this was happenin. I've got my custom bouquet at the top of the list now, box defaults to rte1 saorview on boot, and autobouquets is turned off to prevent astra28.2 being forced back to the top.

deezell

lensman wrote: »

Success of sorts at last & thanks to Zardos & Technofobe, I now have Hyperion 4.5 up & running, however my original problem is back, crossEPG is not downloading, this was why I wanted to install & new image in the first place but as you seen I got myself into bother there too but sorted now, I've tried 2 different usb sticks (ext3 format) but still no epg,....I'll search the threads for knowledge, I was running Spark whilst trying to get enigma2 up & running & I must admit the HD & SD channels were much sharper with better color rendering then enigma:eek:

I've this problem too, cross epg has a mind of its own. I'm a month tinkering with E2, during that time the cross has come and gone. If I press download it says downloading, then after a while it stops and goes back to menu. I no longer get the messages, loading, parsing, etc. I've tried setting storage to a usb, HDD, flash. My network is good, can ftp. I've turned off autobouquets, so my epg is steady on my custom bouquet. I've changed the EPG. source from open 28.2. To Xrd or something, UK channels. This actually worked for a while, but now all my sat channels are blank. Should I delete and reinstall Cross epg, and delete EPG.data using DCC, then reinstall cross.

cyndale

lensman wrote: »

I was running Spark whilst trying to get enigma2 up & running & I must admit the HD & SD channels were much sharper with better color rendering then enigma:eek:

I agree!:eek:

If only Spark had a better skin!

lensman

Zardoz wrote: »

Ok,you are using the correct procedure allright.
Are you sure you didnt use my Alien 1 backup instead of Alien 2 perhaps ?
This is the one you need
http://www.boards.ie/vbulletin/showpost.php?p=94611179&postcount=2908

Success of sorts at last & thanks to Zardos & Technofobe, I now have Hyperion 4.5 up & running, however my original problem is back, crossEPG is not downloading, this was why I wanted to install & new image in the first place but as you seen I got myself into bother there too but sorted now, I've tried 2 different usb sticks (ext3 format) but still no epg,....I'll search the threads for knowledge, I was running Spark whilst trying to get enigma2 up & running & I must admit the HD & SD channels were much sharper with better color rendering then enigma:eek:

Gerry Wicklow

Imstuck wrote: »

Press red button and take it off 'nar'

You may have to do it for each channel as you go along.

I actually found a kids channel where the narrator was on, and there was no option to take it off 'nar', which was a surprise!

In the audio language settings select English not auto or channel preferred should prevent the AD. Nat Geo always defaults to Nar otherwise.

mtoutlemonde

WexfordWarrior wrote: »

Also, the Irish channels do not work. They have been found but no picture shows. They work in spark version without any issues?

Hi, reverted back to Enigma at the weekend and I encountered your problem. What I did was: press FAV, choose Last Scanned, when all the channels appear, choose Provider (yellow button), then choose RTENL and your stations will work in there - just view them before adding them to your favourites - that solved the problem for me.

Now my problems - when I watch/leave on a FTA station or a Saorview and choose another station, the screen info is there but I only get a blank screen and the only way I can get the stations back is to reset the machine by pressing the button at the back which I'm sure wouldn't be good every day. Any solutions?

My second problem - not a major one but just wondering if anyone knows how to change the time on the front panel of the machine? The clock is set correctly for recording / when watching stations but is incorrect on the front panel.

Many thanks for any solutions.

.G.

WexfordWarrior wrote: »

SuperG, you're an absolute gentleman/woman and scholar! That has worked for me and I'm now using the very slick pli night version. It's excellent. Thank you very much for your help.

I have two small problems now to finish off my setup.

The picons are not working. I get a list under the 28.2E Bouquets with movies, news etc etc. but instead of the picons, there is just numbers... e.g. 409 = sky sports 1 etc etc.

How can I fix this?

Also, the Irish channels do not work. They have been found but no picture shows. They work in spark version without any issues?

Any thoughts ?

I am setting this up for my pensioner parents and trying to have things as clean and simple as possible for them.

Thanks again for any help.

Not sure to be honest. Picon's always just worked for me without me doing anything of note. I copy the picons folder to the root of the harddrive and they just show up, thats with open atv images which is what you have and Hyperion 4.5 images which Is what is on my Alien 2 at the moment.

Don't know whats up with the Saorview either I'm afraid.

Technofobe

jayo26 wrote: »

Nope its the red

grand so
yellow on openatv
thanks for letting us know
Cheers :-)

WexfordWarrior

superg wrote: »

Try Menu ->Setup->System->Extended System->OSD settings->Skin Setup. It's in there on open atv. They have 2 skin menus, thats the one used to change skin.

SuperG, you're an absolute gentleman/woman and scholar! That has worked for me and I'm now using the very slick pli night version. It's excellent. Thank you very much for your help.

I have two small problems now to finish off my setup.

The picons are not working. I get a list under the 28.2E Bouquets with movies, news etc etc. but instead of the picons, there is just numbers... e.g. 409 = sky sports 1 etc etc.

How can I fix this?

Also, the Irish channels do not work. They have been found but no picture shows. They work in spark version without any issues?

Any thoughts ?

I am setting this up for my pensioner parents and trying to have things as clean and simple as possible for them.

Thanks again for any help.

jayo26

Technofobe wrote: »

May be yellow key :-)

Nope its the red

jayo26

Imstuck wrote: »

Press red button and take it off 'nar'

You may have to do it for each channel as you go along.

I actually found a kids channel where the narrator was on, and there was no option to take it off 'nar', which was a surprise!

Cheers mate first time id seen it in any the images.

Technofobe

Imstuck wrote: »

Press red button and take it off 'nar'

You may have to do it for each channel as you go along.

I actually found a kids channel where the narrator was on, and there was no option to take it off 'nar', which was a surprise!

May be yellow key :-)

Imstuck

Press red button and take it off 'nar'

You may have to do it for each channel as you go along.

I actually found a kids channel where the narrator was on, and there was no option to take it off 'nar', which was a surprise!

jayo26

Zardoz wrote: »

He installed the Spark plugin in step 1 and is flashing the new image via the Spark plugin in step 2.

Hi mate installed your 4.5 image this evening works perfect only for the audio description. A voice describing what's happening when the misses is watching her soaps and both of them are doing my head in. Do u know how to turn it off, I tried the settings in auto language.

.G.

WexfordWarrior wrote: »

Thanks for all your help to those who have responded so far!

I bought my box with enigma 2 pre installed.

I just want to get to use the pli hd skin so I can see the picture preview/thumbnail in the epg somewhere and its a nice neat skin. I'm a complete newbie.

Anybody kind enough to give me a step by step to get the pli hd skin installed?

i tried downloading from my plug ins myself but once it was downloaded it disappeared or is sitting somewhere that I cant access.

On these threads "Champion" i think (don't quote me) says that once I have downloaded the skin that i need to click on 'menu=>setup=>system=>skins" but there is no "skins" option once I go into system.

I'm obviously doing something wrong. I have the box connected through ethernet and all fine on connection test etc.

do i need to create a skins folder or something on my usb/hd?

A walkthrough or any pointers in the right direction would be IMMENSELY appreciated.

Thanks a million in advance.

Try Menu ->Setup->System->Extended System->OSD settings->Skin Setup. It's in there on open atv. They have 2 skin menus, thats the one used to change skin.

Technofobe

lensman wrote: »

AHHH, now I see where I was going wrong! I was trying to flash the Alien1 image here http://www.boards.ie/vbulletin/showpost.php?p=94612729&postcount=2911
I'll try again later when family hits the sack, I have the freetv.ie image up & running but it's terrible so just remind me again what I need to do to upgrade to you Hyp 4.5 alien2 image via usb stick, Im off to work now, I'll check back after 20:00 tonight,....many thanks

In step 2 of your post
2..When box reboots Im asked to install plugin again but this time I click "NO" & goto MENU/PLUGINS & install plugin_e2upgrade.s (takes about 1min), when complete I power off the box.

This reads as if your trying to reinstall e2upgrade.s plugin not the image

for step 2 clear your memory key ( format ) and copy the image you like IE openATV hyperion 4 or openarp
The files ( e2jffs.img and uimage ) can be in a single folder called enigma2 or back_of_e2
While still in spark plug in your usb key
go to plugins and start the plugin e2upgrade.s
navigate to your folder
press the red button to select the folder
press the red button again to flash the image
remove the usb when finished
power down
press and hold the ok button on front panel and power back up still holding ok
when you see forc release the ok button
press down arrow on front panel select enigma2
press ok
and it should boot into your new image

Bear in mind that you do not need to reinstall the e2upgrade.s plugin again you only had to do this once and now your free to install whatever image you like by simply putting it on a usb key and booting into spark and simply run the e2upgrade.s plugin which you have installed earlier

lensman

Zardoz wrote: »

Ok guys here is a copy of a Hyperion 4.5 backup I made for the Alien 2 aka Golden Media Triplex aka Sab Triple

Its quite similar to my Hyperion 4 backup but has a few slight changes but its mostly the same .

I've included a few mods and tweaks in this image to improve performance over the basic Hyperion 4.5 build.

Firstly it has the amixer audio boost script running so the audio levels are 60% louder than the stock Hyperion image and more like Spark and other receiver levels.
Also included is the alternative audio.elf file by Muitler to improve sound playback via an amp .
This doesnt provide dts audio playback so I am enclosing the original audio.elf file too (it goes in /boot)

Improved tuxtext.ttf file for a better teletext font.

History Zap Selector v1.8 is included ,handy for channel browsing .(Prev/Next Button or Recall)
Use 0 to switch between 2 channels.

Record Infobar is also included

I have also tweaked a few of the button mapping configurations and settings .

It is configured for 28 East Satellite and Saorview ,all picons are installed (usr/local/share/enigma2 )as is an up to date channel list inc some Iptv links.
An upto date satellites.xml file covering 30w to 45e is also installed.

Autobouquets (Sept 29 2014 build) is installed if you'd prefer to use this to generate channel lists,its configured for the Republic of Ireland but its easy to change..

Installed Plugins
AutoTimer
Autobouquets
Automatic Volume Adjustment
CacheFlush
CrossEPG 0.8.1 ( configured to update when the box is in standby )
CoolTVGuide v7.3 (opens on EPG,Green button also opens Single EPG)
RTE Player
1channel (latest version;wont work in certain countries due to isp blocking)
IPTV List Updater v1.63
Enhanced Movie Centre
Media Portal v6.76
Media Player
History Zap Browser
Open Web Interface

Softcam
Oscam v10000 is installed and running,you just need to edit the oscam.server file with your details
Oscam port: 8888 user: root, pass: oscam

FTP: user:root ,pass:pkteam

I've set the default skin as PLi-HD but there are a few other skins to try inc Sky Blue HD ,if you'd prefer.
Plenty of free flash space to install other plugins .
I tried to keep an average free memory of ~15Mb in normal usage so didnt install too many superfluous plugins

The image is setup to use DHCP automatically and is also set for HDMI at 720p.

This is an extremely solid image and very quick ,I have been running it for the last 2 months .
Many thanks to the PKT team,data devil, and other plugin developers who have put in sterling work with the different code involved in this backup.
Enjoy

https://www.dropbox.com/sh/ajkyf04regcsaut/AAD_I351j_yPbIlSkcvtQICQa?dl=0

Some sample screenshots

AHHH, now I see where I was going wrong! I was trying to flash the Alien1 image here http://www.boards.ie/vbulletin/showpost.php?p=94612729&postcount=2911
I'll try again later when family hits the sack, I have the freetv.ie image up & running but it's terrible so just remind me again what I need to do to upgrade to you Hyp 4.5 alien2 image via usb stick, Im off to work now, I'll check back after 20:00 tonight,....many thanks

Zardoz

cyndale wrote: »

Just wondering how to edit the rcS file, how do I open the file to edit it?

Use Dreambox Control Centre ,select file ,then right click on mouse ,then edit.

Using Freshpots Hyperion V4.5 and it hasn't green screened yet, very stable. It does seem to take up more memory though.
On V4 memory free was around 35Mb, now it is around 10Mb!

V4.5 does seem to use more memory than V4 allright ,which is disappointing.
Just a word of advice re memory.
I have noticed than if you install extra plugins and skins whilst it uses extra flash memory as you'd expect it also in some cases uses Ram memory .

As the receiver only has 128Mb of Ram ,its important to have a certain amount of free memory as otherwise the swap will be used and whilst a swap file is handy its nowhere near as efficient as RAM.
I like the way in Hyperion if you press the find button it will display the amount of free memory and swap memory .

cyndale

I found this on a post Zardoz made...

Here's a nice audio fix I came across that increases the audio output of the Alien 2/Triplex in E2.

It uses the alsamixer function to boost the output audio by whatever percentage you wish .

The files contain a modified rcS file (/etc/init.d ) and the amixer file (/usr/bin)

Just ftp the following two folders into your receiver and change the attributes to 755

You can edit the rcS file (Run Control Script) with your own audio boost levels if you wish
The modified rcS file has 3 lines of additional code

/usr/bin/amixer -c 1 set Analog playback '60%' unmute &
/usr/bin/amixer -c 1 set SPDIF playback '60%' unmute &
/usr/bin/amixer -c 1 set HDMI playback '60%' unmute &

The files are for Hyperion but you can edit the rcS file in other images too ,just add the extra 3 lines manually.

With this fix the audio levels are much louder in general and more comparable to Spark and other receivers.
You will no longer have to increase the volume levels on your tv to high levels and the fix doesn't distort the audio.
I have increased the audio levels by 60% as I tried a number of different settings and this seemed the best .

Coupled with the automatic volume adjustment plugin the audio levels on the receiver are pretty constant now.
I set the mpeg audio level at 60% on my remote and adjust ac3 channels for +40 in the automatic volume adjustment plugin .
Hope this helps people.

Just wondering how to edit the rcS file, how do I open the file to edit it?