Technofobe wrote: » ?
lensman wrote: » 2..When box reboots Im asked to install plugin again but this time I click "NO" & goto MENU/PLUGINS & install plugin_e2upgrade.s (takes about 1min), when complete I power off the box. 3..Pressing OK I power the box & select ENIG from the boot option & press OK & box should boot fully into enigma
lensman wrote: » I used this 3 step routine in the past, it's on the freetv.ie site. 1..Boot into Spark & insert usb key, when asked to install plugin click "YES" plugin installs (takes 10sec) then box reboots. 2..When box reboots Im asked to install plugin again but this time I click "NO" & goto MENU/PLUGINS & install plugin_e2upgrade.s (takes about 1min), when complete I power off the box. 3..Pressing OK I power the box & select ENIG from the boot option & press OK & box should boot fully into enigma2. freetv.ie have links to the files mentioned above which I managed to install them correctly but I don't like the openARP image they supply but when I replace then with yours the box gets stuck in boot at the 3rd & final step
deezell wrote: » Because I don't even have to pause it if it's on time shift, so if dinner runs past 6, just quickly rewind to start, then watch. This has the advantage of being able to jump the ad breaks, so by 7 we've usually caught up just in time for Nationwide (Ugh!, time to go in the other room and fiddle with the Sab). SHMBO likes it this way, the less button presses the better. If I think of it on time I run up and press the pause button at 6, then just hit play after the nosh. If I set it on record don't I have to wait until the recording is over at 7 to play it back? I think that's how it works on the edision, but anyway I don't need to keep it, just have it delayed by 15-30 minutes. At 7 I can watch RTE1+1 anyway. I want to progress from the Edision for the 7 day EPG, the RTE Player, a browser when I can get a plugin, (lot of confusion about this on the blogs), and eventually I want to set up the Oscam, as another of these boxes is going abroad hopefully to allow a family member watch RTE .
Zardoz wrote: » You only need those 2 files on the usb drive ,yes ,you can replace them with my files. You upgrade the image from a plugin within Spark ,see herehttp://www.boards.ie/vbulletin/showpost.php?p=83252495&postcount=2 How did you flash the box before ?
deezell wrote: » ......After that I want the timeshift to work as it does on my old Edision box so that I can pause the 6 news until dinner is over. .....
FlexMcMurphy wrote: » I've been wondering about that for a while. I always use the AA2 remote to put it's volume to MAX and then I actually set the volume I want to hear from the TV by using the TV remote. Could this damage the AA2 somehow? Cheers, Flex
Zardoz wrote: » ... Do not increase the audio to 100% on your amiko for mp3 channels .
lensman wrote: » This is what I now have on the usb stick, I was trying to do it from memory & I didn't have the plugin folder, just the 2 files (uImage & e2jffs2.img) can I replace the 2 files above with your Hyperion 4.5 backup files of the same name?......Thanks again
Slevster wrote: » The double edge sword of auto bouquets! Disable or curtail its update schedule........... One of the best things about this box and these systems is the ability to arrange channels as you want them, not as sky has them for commercial reasons. Eg put all the bbc s together. FTA channels really don't change their freq , bar adding a HD version or the likes. Use dreambox edit to create bouquet s as you want them. Eg I watched the Connacht game on BBC wales earlier. I have it and BBC alba and BBC ni in a bouquet so I can watch the pro12 games easily....... Edit only seeing post above by superg. As he said!
phobia2011 wrote: » hi lads, box has hit a stall on the boot screen, sly hd just displayed but not booting, do i just head to spark and reload image?
Zardoz wrote: » Did you flash the box using the spark plugin and did you have the firmware files on the root of the usb drive ?
Imstuck wrote: » Just a quick one for Zardoz, I have to have my volume set extraordinarily high on my tv running your Hyp' 4.0. Will 4.5 take away the need for this? Also some channels are a lot louder than others and I have to up/down volume as soon as I change change channel, will 4.5 sort this as well?
Zardoz wrote: » Its in here m8https://www.dropbox.com/sh/exzuattrkvu15u8/AABKph82qeWMw6Odzqnpw5LRa?dl=0 The 1channel file on the downloads server is ancient ,this is the latest version. Did you flash the box using the spark plugin and did you have the firmware files on the root of the usb drive ?
jayo26 wrote: » Hi mate do u mind me asking is there a stand alone file for 1channel anywhere I think I seen it before but cant remember where. I'm using freshpots image hyp 4.5 but I don't wanna go flashing a new image just for one addon because its been running perfect and I've it set up the way we like it. Cheers in advance. Edit: Ok ignore ha I realised I seen it in the plug in downloads menu.
I've F'd up the box now, tried to install your latest HYP 4.5 backup but now the box is stuck on boot, I followed the 2 stage setup in spark & the set enigma as default but it BOOT stays on display & goes no further,....H E L P
Zardoz wrote: » Yes,of course ,its built in to all Hyperion images . Yes,go to plugins and press red button to uninstall Crossepg ,then reboot and reinstall via download plugins server.
Zardoz wrote: » Strange lensman ,quite odd. You can format it in spark or on a pc with relevant software. I think Crossepg will work with fat32 too. Did you try reinstalling Crossepg ?
illdoit2morrow wrote: » Is EMU manager plugin included? Better question would be to ask if blue panel is in this image?
Did you try reinstalling Crossepg ? no not yet, can it be done from the box?
Zardoz wrote: » Ok guys here is a copy of a Hyperion 4.5 backup I made for the Alien 2 aka Golden Media Triplex aka Sab Triple Its quite similar to my Hyperion 4 backup but has a few slight changes but its mostly the same . I've included a few mods and tweaks in this image to improve performance over the basic Hyperion 4.5 build. Firstly it has the amixer audio boost script running so the audio levels are 60% louder than the stock Hyperion image and more like Spark and other receiver levels. Also included is the alternative audio.elf file by Muitler to improve sound playback via an amp . This doesnt provide dts audio playback so I am enclosing the original audio.elf file too (it goes in /boot) Improved tuxtext.ttf file for a better teletext font. History Zap Selector v1.8 is included ,handy for channel browsing .(Prev/Next Button or Recall) Use 0 to switch between 2 channels. Record Infobar is also included I have also tweaked a few of the button mapping configurations and settings . It is configured for 28 East Satellite and Saorview ,all picons are installed (usr/local/share/enigma2 )as is an up to date channel list inc some Iptv links. An upto date satellites.xml file covering 30w to 45e is also installed. Autobouquets (Sept 29 2014 build) is installed if you'd prefer to use this to generate channel lists,its configured for the Republic of Ireland but its easy to change..Installed Plugins AutoTimer Autobouquets Automatic Volume Adjustment CacheFlush CrossEPG 0.8.1 ( configured to update when the box is in standby ) CoolTVGuide v7.3 (opens on EPG,Green button also opens Single EPG) RTE Player 1channel (latest version;wont work in certain countries due to isp blocking) IPTV List Updater v1.63 Enhanced Movie Centre Media Portal v6.76 Media Player History Zap Browser Open Web Interface Softcam Oscam v10000 is installed and running,you just need to edit the oscam.server file with your details Oscam port: 8888 user: root, pass: oscam FTP: user:root ,pass:pkteam I've set the default skin as PLi-HD but there are a few other skins to try inc Sky Blue HD ,if you'd prefer. Plenty of free flash space to install other plugins . I tried to keep an average free memory of ~15Mb in normal usage so didnt install too many superfluous plugins The image is setup to use DHCP automatically and is also set for HDMI at 720p. This is an extremely solid image and very quick ,I have been running it for the last 2 months . Many thanks to the PKT team,data devil, and other plugin developers who have put in sterling work with the different code involved in this backup. Enjoyhttps://www.dropbox.com/sh/ajkyf04regcsaut/AAD_I351j_yPbIlSkcvtQICQa?dl=0
lensman wrote: » Yeah, I tried all of your suggestions over the last few days, crossepg is configured to HDD, the only other option is internal flash, disk menu says it's ext3, it's a 16gb stick fat32, I just can't get my head around why it's F'd up as I didn't change anything, just to be sure how do I format the stick in ext3?
