superg wrote: » This might be long winded so bear with me! I like to have my "all channels " bouquet starting with channel 101 for the first one, 251 for the next one, 301 , 351 etc. In order to do this I need something in numbers 1-100 and numbers 280-300 and so on. Autobouquets puts data channels with no name in these positions. So I arrange everything the way I want them and upload to the box which is all fine. However if I pull the channels back from the box all the data channels disappear and I'm left with just the TV channels starting from number 1 and carrying on in sequence. What this means is if I need to make changes to a bouquet I have to re do everything from scratch ( run autobouquets to get the no name data channels back and then re order everything). Naturally this is a pain in the hole so I put named data channels in places 1-100 instead. This means they don't disappear when I save my file in dreambox edit or when I pull the channels back from the box. The problem is these data channels show up in the on screen epg whereas the no name ones didn't. This is why I wanted the epg to start from the entertainment bouquet rather than the all channels bouquet as I don't have the data channels in the individual bouquets, only in the main "all channels" bouquet. It's only a minor complaint but it's a complaint nonetheless
deezell wrote: » Good question, the default startup channel seems to bring with it the bouquet that it was selected from, e.g , select RTE 1 in favourites, exit the EPG, then press OK to bring up the basic channel list, the press Menu which gives the option to set the startup channel. Box will start up on this channel and this bouquet. This works fine as long as you use the epg to change, but using the numbered buttons will select the corresponding channels from the first bouquet on the list, usually the irish channels on 28.2 Sky, not much use if you want terrestrial. I've tried moving my custom list to the top of the bouquets to counter this using dreambox edit. It worked, but next day the bouquets are back on their old order ( Sky numbered ones followed by others), and I'm back to where I started. I think it has something yo do with the nightly update.
deezell wrote: Good question, the default startup channel seems to bring with it the bouquet that it was selected from, e.g , select RTE 1 in favourites, exit the EPG, then press OK to bring up the basic channel list, the press Menu which gives the option to set the startup channel. Box will start up on this channel and this bouquet. This works fine as long as you use the epg to change, but using the numbered buttons will select the corresponding channels from the first bouquet on the list, usually the irish channels on 28.2 Sky, not much use if you want terrestrial. I've tried moving my custom list to the top of the bouquets to counter this using dreambox edit. It worked, but next day the bouquets are back on their old order ( Sky numbered ones followed by others), and I'm back to where I started. I think it has something yo do with the nightly update.
Technofobe wrote: » If it has the sky skin its probably likley to be hyperion 4 or 4.5 when you go into menu does it have an option for pkt blue panel ?
superg wrote: » Yeah found it on Hyperion. On open atv as Harcrid said above there was one bootlogo in usr/share so I put my new one there. It comes up on boot alright but another one displays before it so there must be another one somewhere else. General question if anyone would know, is there a way to set which bouquet to display at startup on the cool tv guide, version 7.3?
lucast2007us wrote: » Hi guys my friend setup my alien 2 box for me. I just wanted to check what image is on it but when I went to check it said "image information unavailable" Any easy way to find out? It is definitely a enigma 2 image and has the s*y skin
Zardoz wrote: » its /boot on Hyperion ,not sure with Openatv as they have a different file structure.@Championc ,did Openatv sort the recording issue on multiple tuners yet ? There was a modified pti.ko file released a while back that sorted the issue on HDMU ,I was wondering did Openatv implement it in their updates ?
superg wrote: » Anyone know where boot logos are stored on hyperion 4.5 and openatv 4.3?
Slevster wrote: » Did you enable hdmi-cec? If so, did you change some option for your volume?
cyndale wrote: » Just a question, Hyperion V4.5 swap file on or off?:eek:
Griffinx wrote: » On Hyperion 4.5 and Vol + and - and mute has stopped working... a reboot hasn't resolved it Any ideas to resolve appreciated
Zardoz wrote: » This is on the Alien 1 ? ,as I havent uploaded my 4.5 Alien 2 backup here yet. Hey zardoz do you upload backups on different sites?
Zardoz wrote: » As in best for looks or best for performance as whilst some skins look really nice their performance isn't the best . I primarily use Pli-HD or Pli-HD Night on Hyperion or Openatv as they seem the slickest . They are tried and trusted skins so less likely to degrade performance unlike other more bloated or buggy skins. Its all a matter of opinion though ,some people like different skins ,some like the Sky skin ,others the Vix skins like Vix Night (nice skin). I think the Metrix HD skin whilst nice struggles on the Aliens ,its a pretty demanding skin. Theres no harm in trying out a few different skins and see which ones you like
alanhiggyno1 wrote: » ok guys what skin do ye think is the best
Griffinx wrote: » yes I wanted to power on the TV using the Amiko red power button. I knew that you could get the TV to switch to the HDMI connection if it was already powered on. Can hdmi-cec also cycle power on the tv? I have a Panasonic Viera TV
bappelbe wrote: » The hdmi-cec will power on/off the tv using the hdmi connection. If you don't have hdmi I don't know of a way to program the remote control to control anything else.
