gazzer wrote: » TS Media can be very hit and miss for me and a lot of the time when accessing some of the aps the screen freezes and I have to reboot. I tend to only use the movies and tv section now and that is fine.
jayo26 wrote: » Good morning guys just wondering how does Ts media player work for all of you? It's extremely slow and buggy for me I'm using freshpots 4.5 backup now its not a big deal as I also use a minx neo 8 android box and installed xbmc on that but just curious is it me or is everyone's the same it was the same when using any of the open atv images beforehand also
balaton wrote: » With this backup image also works the inside tuner DVB-T?
Fresh Pots wrote: » the e2 plugin is in spark, you need to boot into spark and go to plugins. There you'll find the e2upgrade plugin. There you'll flash the enigma2 image. when finished reboot back into enigma2. Job done.
Skippy along wrote: » I'm running freshpots fantastic hyperion 4.5 image one small quirk in that it has "start" on the box display after it being left overnight have to then go into the menu to select my " favourites" to get going how would I go about fixing this Thanks
tnegun wrote: » No they work so not a tuner problem then? @ Slevster thanks it's enabled but I think I know where to start looking now
Fresh Pots wrote: » When recording do all the other channels go black? Do the sat fta/ saorview ones still work?
tnegun wrote: » No I gave up on it as I had the same issue on the Pi only a black screen
tnegun wrote: » I'm running Fresh Pots latest image but an unable to watch a second satellite channel while recording one. I thought I'd sorted it a couple of weeks back by rescanning but it's still occurring. Both tuners show 80% signal strength so I'm getting signal when I switch to the second station it I get a black screen with the flashing R in the infobar. Any ideas whats wrong?
balaton wrote: » Thanks I read it I have a question In first few posts in this thread the first point is: 1- Download the E2 Plugins I would like to know if E2 Plugins is installed inside backup(Hyperion v4.5 Complete Backup Image) image or not? I do all the points of the procedure 1->7 ? thanks a lot
balaton wrote: » Yes? kindly can you tell me how to flash? Installation instructions I'm new and do not understand much Thanks very much
Fresh Pots wrote: » Yep
balaton wrote: » This backup: Hyperion v4.5 Complete Backup Image
balaton wrote: » Hi all This backup it's good enough for golden media triplex? Thanks
Fresh Pots wrote: » Suitable for the Amiko Alien2 and other ST7162 Based Boxes. This image is comes with the following: AutoTimer AutoVolumeAdjustment AutoBouquets 20131020 (updated to remove non fta HD channels,updates daily at 4am) CacheFlush CrossEPG 0.8.1 (updates in standby) CoolTVGuide v7.3 Enhanced Movie Center (turned off atm, looks better with Pli-mod skin) OpenWebIf OSCam v9991 (with blank sample reader) PermanentTimeShift Full set of Saorview and uk tv picons (xpicons) RTE Player Samba Server Streaming / Recording of $ Channels while watching another $ channel Other mods/skins included are: Sly Bootlogo by abell431 of openpli.org Sly skin by abell,digidude and pauldb of sattvhelp Mui4tler's audio fix to help with audio dropouts Data Devils Additional Keymapper The image is setup to use DHCP automatically and is also set for using HDMI at 720p. Terrestrial channels may need to be rescanned depending on your geographical location. FTP and Telnet - Username "root", Password "pkteam" DreamBoxEdit paths - /etc/enigma2/ How to use picons Transfer the picon folder from the download over to your external harddrive (/hdd) Then go to the pkt bluepanel and find skin setup. In there change picons location from Enigma to HDD. All picons should display then. If your saorview picons are still not working you will need to rename each of your saorview picons to the correct service reference. These can be found by loading up your channel list in dreamboxedit and hovering over the chosen channel. Download link........]
Griffinx wrote: » Could someone tell me why this message sometimes appears when I'm flicking through channels.
Griffinx wrote: » Its an external 60GB USB flash drived formatted to EXT3. How would I know if its mounted properly? Doesnt Hyperion 4.5 auto mount?[/QUOTE Boot into spark, and use the utility there, to test the effectiveness of your flash drive
how.gareth wrote: » It's a channel you don't have access to usually, like a subscription channel I think
Griffinx wrote: » Could someone tell me why this message sometimes appears when I'm flicking through channels. [https://onedrive.live.com/redir?resid=19B1BEA4E59B4773!300322&authkey=!APlupZm6kpl_bbI&v=3&ithint=photo%2cjpg
Fresh Pots wrote: » It should be able. Are you recording to an external harddrive? Is it mounted properly?
