Zardoz wrote: » Thats just the basic stock Hyperion 4.5 image btw ,its not a backup so it will need configuring .
championc wrote: » Why are you doing that @no1? all you needed to do was connect the PC / Laptop directly to the box. i never mentioned router anywhere. just manually assign each device with the same ip's that each currently uses. Simples
alanhiggyno1 wrote: » ya for the life of me it wont let me install autobouquets ipk
no1mikacar wrote: » Championc, Can i just check for when i try this? To connect the Box to a laptop - am i to use a ethernet Cable or a Pc Screen Cable Then whats my next step? Any chance of step by step because im new to this... Thanks John
lucast2007us wrote: » Am using freshpots image and every so often the timer on the lcd would change randomly. Worried this is messing up my recordings. It appears the timer on the lcd display has the wrong time but the actual screen on the tv shows the right time weird
soram wrote: » I'm still using Champs OpenATV image. I tried the Hyperion but it gave me more trouble that the OpenATV! All sorts of buttons would crash the GUI. Not sure what I was doing wrong! Anyway, I am sort of OK with the OpenATV except the CrossEPG wasn't loading. By chance I had looked at a few stats before loading the EPG data. After loading I saw my free RAM was down to around 1%. Now the box freezes and crashes for no apparent reason. I am assuming it runs out of space. Is there any low hanging fruit I can delete that would free this up if indeed it is the problem? The info page also says the swap is 30 and there is 27 free (MB) - I cannot seem to find where the swap is dimensioned or enabled. Would this make any difference? Many thanks for all the efforts and info!
Slevster wrote: » have you a hdd connected and mounted? and crossepg saving to the hdd ? if not, that may well be the issue
soram wrote: » It is set to the HDD yes and appears to store there. I have over 34MB free in Flash and i thought if it doesn't store to the HDD it goes there. But it seem to grab extra RAM
thebland wrote: » im having an issue with my saorview channels, i have amiko alien 2 with enigma 2 running openatv 4.2. how it started....i got a new tv so i shut down the box,unplugged the aerial and 1 satellite feed from AA2 and put them into new tv,just out of interest to see how the guide looked etc, everything worked fine, including saorview channels. i put the cables back into AA2, started it up and all the saorview channels were grey, none of them worked. satellite channels were working as normal. i rescanned terrestrial channels and only received rte1 and possibly +1 or news now. all other channels showed N/A. i left it for a day and rescanned terrestrial again, all channels are back, but they are in grey, so i cant watch them... if i put the aerial back into tv all the saorview channels are there, working perfectly. any help or nudge in the right direction is greatly appreciated, david
Slevster wrote: » It does sound like a hdd issue. (you could check its ability in spark ). is it formatted in ext3?have you another flash drive or hdd you could try, just to eliminate it as the source of your problem
Slevster wrote: » find the freq for your area (championc posted a handy list of the transmitters a week or two back in this thread. do a search under his username. or when you have the aerial plugged into your tv, look for the details on some of your tuned in channels check RTE 1 hd and TV3, as they should be on the 2 different MUX's) Then do a manual scan for the mux 1 and mux 2 , clearing first.
thegreek wrote: » I am using CampionC's latest image. I tried it before but found it a bit falkey but that may have been because I was messing around with it. It is up and running now and looks really good but one thing is driving me mad. There is no page down on the epg. Usually I can go to the next screen of channels by pressing program down. Any suggestions on how to configure?
ivegotafeeling wrote: » I have a SAB Unit Triple Tuner running Enigma2. When I exit from playing recorded media back to the live feed from the satellite the screen is just black until I restart the box. No FTA channels are showing pictures or sound. Terrestrial channels are displaying ok. Is there something I need to configure to stop this happening? Thanks...
Slevster wrote: » Others may correct me on these, (not entirely sure if these work in opentv): Press the play button (to bring up list of bouquets) Or press menu when in the guide to change the behaviour/actions of the coloured buttons , and set to cycle through bouquets
Slevster wrote: » What image? Some folks reported similar issues with opentv . look back through this thread for more
Slevster wrote: » don't worry too much about the % of free ram . it's not uncommon for it to be running with only 1-3% free. Its a question asked regularly
ivegotafeeling wrote: » System OE: OE-Alliance 2.3 Distro: openatv Firmware version: 4.2.1 Driver date: 20140815 Kernel version: 2.6.32.61_stm24_0216 Gui version: 2014-08-16 I'll have a search again. Thanks
soram wrote: » I posted this a couple of weeks back but unfortunately it went nowhere - we even posted on the OpenATV forum but got no answers. I had one thought that maybe the timer is finding the channel on the SAT tuner aswell as the terrestrial tuner and initiating a record there too. I was going to delete all the double instances from my bouquets but haven't got there yet! If you get a solution please post!
ivegotafeeling wrote: » It's a pain. The difference with mine is that there is nothing else recording at the time. Everything is just playing off the hard drive. I have noticed it happens after I watch a few programs after one another. I will stop between them later and just clarify that.
soram wrote: » If you restart the GUI using the red button when in this condition does it flag a timer as being imminent?
ivegotafeeling wrote: » No the next timer would be the next day.
soram wrote: » It may be but in our case there is no timer actually present but the restsart says there is!
ivegotafeeling wrote: » I just hold down the standby button on the remote and restart the box from there. I will try the restart GUI tonight and see what comes up.
