Slevster wrote: » What happens when you press the "exit" button on the remote when in the guide?
alanhiggyno1 wrote: » nothing just a red triangle
Slevster wrote: » Oh. And your exit button is functioning correctly within other plugins? Eg timer (or within the guide itself, if for example , you press the "info" button to view more details of a programme, then press exit to return to main guide view)
alanhiggyno1 wrote: » yes it works for everthing else perfectly except the guide
Slevster wrote: » Odd . After that, just change the red button (short press) to zap and exit. However , you could solve by editing the keymap.xml, and set the exit button to "exit" within the guide section (I think there is an EPG section to the keymap from memory, but would have to check to confirm.)
Technofobe wrote: » Yes if you connect the box to the broadband router and have a pc also connected to the same router you can use dreamboxedit
alanhiggyno1 wrote: » actuall when i press info in the guide now and press exit the triangle shows so cant exit at all
Slevster wrote: » Would suggest removing the plugin and re installing again in that case
stevie09 wrote: » Hi Gents, I have a question, how can I load a local ipk using fresh pots image, I cant find the menu item. thanks Steve
alanhiggyno1 wrote: » which plugin
Fresh Pots wrote: » Use dream explorer, its already installed in plugins.
Slevster wrote: » Have you the cooltvguide plugin installed (assuming that is the guide you are talking about. Go to plugins in the main menu and you should see it there (may be in there as cool TV guide set up)
no1mikacar wrote: » Hello, New to this.. Bought a new Amiko Alien 2+with Enigma pre loaded to replace my sky box, Cant seem to sort out my channels, Did an auto scan & found all the channels as they were on my sky box but for example when i press channel one it selects rte 1 on 101 but nothing happens? i can view Soarview channels by pressing the sat button & selecting Terrestrial Providers & choosing the channel from there but its up around 2900 Just want a simple set up with only free working channels 1-30 or 1-40 something like that but not 3000 channels but most not working... Im new to this so terms etc will be new to me... Any help would be great, Thanks John
cyndale wrote: » I have picons of all the channels I am using, but about 10 of the picons aren't showing up in the channel list, I wonder why?
alanhiggyno1 wrote: » now ive no guide.what should i do
alanhiggyno1 wrote: » there is no option to exit button on cool tv guide.anyone know how to do this
illdoit2morrow wrote: » I had a similar issue recently, the problem was that the service reference for the channel and the picon corresponding to that channel were slightly different. I renamed the picon file to be the same as the service reference for that channel and it worked after that.
cyndale wrote: » Where do I look for the service reference for the channel?:eek:
how.gareth wrote: » I ran champs ARP for ages and as far as I remember when cool tvguide updated to the current version it lost the ability to "exit". Only way for me was holding down red button to exit, sucks but other than that the image was pretty wife friendly and worth sticking with if ye don't fancy trying H4.5
hallo dare wrote: » @imstuck Let's start from the beginning. Can you test something else on that ethernet cable or swap it for another? If all's good then follow on. Below IP's are for example purpose. 1. You have your box connected to your router via ethernet. 2. On your STB go to network settings for your box. 3. For the moment disable DHCP so we can enter our own details. 4. Let's say your routers address is 192.168.0.1 5. So lets say we give you box an IP of 192.168.0.140. 6. Subnet Mask should be 255.255.255.0. 7. Gateway should be the IP of your router, in our example case it's 192.168.0.1 8. Edit your DNS for Nameserver 1, 8.8.8.8. 9. Edit your DNS for Nameserver 2, 8.8.4.4. 10. Click save and give it a few seconds for network activation. After you've done all that, give it a test.
