nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Child Item

Amiko Alien2 / SAB / GM / ST7162 ENIGMA Discussion Thread

championc

This thread is for discussion of the ENIGMA operating system on ST7162 Based Satellite & Terrestrial Combo Receivers

The boxes covered would be the
Amiko Alien2
SAB Unix Tripple
GM Triplex

Enigma is a Linux based alternative to the default Spark operating system on these boxes. Enigma is a more customisable OS and provides the ability to add plugins which can accomplish many tasks enabling users to have a box which might look and perform like a Sky box, giving a 7 day EPG and an alternative to series link

A detailed FAQ type post with most installation instructions is below in Post 2

**** Please note : the discussion of card sharing is prohibited in this thread and any such discussion may attract a ban from the moderator ****

Find more posts tagged with

amiko alien2

enigma2

Quick Links

Comments

Griffinx

dkane wrote: »

Are you using boxipaddress:8888
Username root
Password oscam

I put boxipaddress:8888 into my browser but it doesn't get as far as asking me for Username

Fresh Pots

Griffinx wrote: »

Hi,

Im trying to login to Oscam on Hyperion 4.5 but get 403 Forbidden Access denied. I think its something to do with httpallowed in the oscam config

[webif]
httpport = 15500
httpuser = *****
httppwd = *****
httprefresh = 10
httpallowed = 127.0.0.1,192.168.1.28-192.168.0.xx

Can someone tell me where on the box this file is located.

Thanks.

Change the range to 192.168.0.0-192.168.1.99.

Griffinx

Fresh Pots wrote: »

Change the range to 192.168.0.0-192.168.1.99.

That was only a sample file..can you tell me where the file is located on your image?

Kenny Powers

Griffinx wrote: »

That was only a sample file..can you tell me where the file is located on your image?

config file in usr/keys or var/keys can't remember which

mass_debater

Griffinx wrote: »

I put boxipaddress:8888 into my browser but it doesn't get as far as asking me for Username

What ip is your box? The file is /var/keys/oscam.server, you need to modify the file to suit your ip range so you can access it from your browser. We can not help you getting oscam working though.

dkane

Are there issues running enigma2 on these boxes at 1080p?
Wondering why the images are using 720p.

_Jumper_

dkane wrote: »

Are there issues running enigma2 on these boxes at 1080p?
Wondering why the images are using 720p.

For people with 720p Tvs.

If the backup is set to 1080, when someone with 720p loads it up they get blank screen.

cyndale

_Jumper_ wrote: »

For people with 720p Tvs.

If the backup is set to 1080, when someone with 720p loads it up they get blank screen.

I was told by a guy from Saorview to use 1080i because that is the way the TV stations broadcast. I asked him why they broadcast in 1080i and he said something about bandwidth being much less than 1080p.

mass_debater

Tv is broadcast in 1080i, 1080p is not a tv resolution so if you set the box to 1080p you'll still only get 1080i

noleybaby

dkane wrote: »

Figured it out. Cool Epg doesn't look in /media/hdd for picons.
Used telnet to connect to box and added this symlink:

ln -s /media/hdd/picons /coolpicons

So, when you telnet in and login as root, what is the actual command your issuing ?
I tried the above but get -sh not found !

Thanks

noleybaby

dkane wrote: »

Figured it out. Cool Epg doesn't look in /media/hdd for picons.
Used telnet to connect to box and added this symlink:

ln -s /media/hdd/picons /coolpicons

So, when you telnet in and login as root, what is the actual command your issuing ?
I tried the above but get -sh not found !

Thanks

Update - got it working, so telnet in (i used Putty), login is as Root (password pkteam) and issue the following following command sh -s /media/hdd/picons /coolpicons

Thanks.

dkane

noleybaby wrote: »

So, when you telnet in and login as root, what is the actual command your issuing ?
I tried the above but get -sh not found !

Thanks

Update - got it working, so telnet in (i used Putty), login is as Root (password pkteam) and issue the following following command sh -s /media/hdd/picons /coolpicons

Thanks.

The command to add a symbolic link on Linux is ln -s not sh -s

how.gareth

Lads on Fresh Pots H4.5 is anyone having issues with the time on the display? I have to power off and back on to get it correct, apologies if it was already covered but I don't remember seeing anything

dkane

how.gareth wrote: »

Lads on Fresh Pots H4.5 is anyone having issues with the time on the display? I have to power off and back on to get it correct, apologies if it was already covered but I don't remember seeing anything

Yeah I have that issue too. Time on front starts at 0:00 when you power up the box. Doesn't get set correctly until you put it into standby.

tnegun

dkane wrote: »

Yeah I have that issue too. Time on front starts at 0:00 when you power up the box. Doesn't get set correctly until you put it into standby.

Same here anyone else have an issue with CoolGuide? If I change key assignments it get lost after a reboot.

no1mikacar

Hello, New to this..
Bought a new Amiko Alien 2+with Enigma pre loaded to replace my sky box,

Cant seem to sort out my channels, Did an auto scan & found all the channels as they were on my sky box but for example when i press channel one it selects rte 1 on 101 but nothing happens? i can view Soarview channels by pressing the sat button & selecting Terrestrial Providers & choosing the channel from there but its up around 2900
Just want a simple set up with only free working channels 1-30 or 1-40 something like that but not 3000 channels but most not working...
Im new to this so terms etc will be new to me...

Any help would be great,

Thanks

John

Imstuck

hallo dare wrote: »

@imstuck

Let's start from the beginning.

Can you test something else on that ethernet cable or swap it for another?

If all's good then follow on.

Below IP's are for example purpose.

1. You have your box connected to your router via ethernet.
2. On your STB go to network settings for your box.
3. For the moment disable DHCP so we can enter our own details.
4. Let's say your routers address is 192.168.0.1
5. So lets say we give you box an IP of 192.168.0.140.
6. Subnet Mask should be 255.255.255.0.
7. Gateway should be the IP of your router, in our example case it's 192.168.0.1
8. Edit your DNS for Nameserver 1, 8.8.8.8.
9. Edit your DNS for Nameserver 2, 8.8.4.4.
10. Click save and give it a few seconds for network activation.

After you've done all that, give it a test.

Tried that and no luck, see attached photo.
I'm restarting atm

Imstuck

Forgot to post photo!

championc

no1mikacar wrote: »

Hello, New to this..
Bought a new Amiko Alien 2+with Enigma pre loaded to replace my sky box,

Cant seem to sort out my channels, Did an auto scan & found all the channels as they were on my sky box but for example when i press channel one it selects rte 1 on 101 but nothing happens? i can view Soarview channels by pressing the sat button & selecting Terrestrial Providers & choosing the channel from there but its up around 2900
Just want a simple set up with only free working channels 1-30 or 1-40 something like that but not 3000 channels but most not working...
Im new to this so terms etc will be new to me...

Any help would be great,

Thanks

John

The problem is the image that it on the box has been prescanned with it's terrestrial probably from Three Rock, and then had the channels moved into the Bouquets after scanning. By jumping to Terrestrial Providers, you are probably looking at the channels that YOU scanned. If you press RED for all channels, you might see two or three RTE One's.

So just download DreamboxEdit to a PC and re-edit the listing the way you want it. See www.dreamboxedit.com - http://dreamboxedit.com/ccount/click.php?id=dbe_download_6011_full

** The Ideal beginners image - everything you could possibly need all setup and working **
** See Post #2 of this thread or the Readme file in the download directory **

_______________________________________________
Champions OpenATV AA2/7162 Image Download Link - http://goo.gl/j8y5fW

Champions OpenAR-P AA2/7162 Image Download Link - http://goo.gl/2DuVm0
Champions OpenAR-P SAB Solo/8900 Image Download Link - http://goo.gl/up5tIu

no1mikacar

Thanks Championc for the information, i haven't my box connected to the internet, would i need to do this for this to work or can i do it through a usb or connecting laptop to box

John

championc

no1mikacar wrote: »

Thanks Championc for the information, i haven't my box connected to the internet, would i need to do this for this to work or can i do it through a usb or connecting laptop to box

John

To use DreamboxEdit, just set both your Laptop AND the Box with STATIC IP Addresses and you can then connect your laptop straight to the box. I've done this many times.

** The Ideal beginners image - everything you could possibly need all setup and working **
** See Post #2 of this thread or the Readme file in the download directory **

_______________________________________________
Champions OpenATV AA2/7162 Image Download Link - http://goo.gl/j8y5fW

Champions OpenAR-P AA2/7162 Image Download Link - http://goo.gl/2DuVm0
Champions OpenAR-P SAB Solo/8900 Image Download Link - http://goo.gl/up5tIu

RobTheLad

Anybody got a copy of the latest Sly HD skin, and instructions on how to install it?

alanhiggyno1

hi on your OpenAR-P how do i exit the epg on this image besides having to do a zap by holding the red button for 2 seconds.it is very annoying.thanks

Slevster

alanhiggyno1 wrote: »

hi on your OpenAR-P how do i exit the epg on this image besides having to do a zap by holding the red button for 2 seconds.it is very annoying.thanks

Exit button (or change the re, green, yellow blue button actions by pressing menu while in the guide to change options)

no1mikacar

Not sure how to do that? if i connect to the Amiko Alien 2+ to the Broadband router through a ethernet cable will that work for me & what steps should i take, i haven't much knowledge in this

Thanks,

John

alanhiggyno1

Slevster wrote: »

Exit button (or change the re, green, yellow blue button actions by pressing menu while in the guide to change options)

ill try now thanks

alanhiggyno1

there is no option to exit button on cool tv guide.anyone know how to do this

alanhiggyno1

Slevster wrote: »

Exit button (or change the re, green, yellow blue button actions by pressing menu while in the guide to change options)

no joy im afraid...very annoying when looking thru tv guide and having to zap to exit the guide.would love a fix for this as its driving the mrs mad lol

Technofobe

no1mikacar wrote: »

Not sure how to do that? if i connect to the Amiko Alien 2+ to the Broadband router through a ethernet cable will that work for me & what steps should i take, i haven't much knowledge in this

Thanks,

John

Yes if you connect the box to the broadband router and have a pc also connected to the same router you can use dreamboxedit

Slevster

alanhiggyno1 wrote: »

no joy im afraid...very annoying when looking thru tv guide and having to zap to exit the guide.would love a fix for this as its driving the mrs mad lol

What happens when you press the "exit" button on the remote when in the guide?