Kenny Powers wrote: » Get a chromecast or nowtv box and use Plex to watch your other stuff.
Slevster wrote: » try using the back usb port and force upload.
alanhiggyno1 wrote: » tried both front and back and still the same.why is this
Kenny Powers wrote: » I gave up.using this box as a media center, it never played back in good quality there was always some issue. Its good as a "TV" box to watch and record that's all I use it for now. Get a chromecast or nowtv box and use Plex to watch your other stuff.
mass_debater wrote: » Format your usb key and flash it from spark
Slevster wrote: » Brilliant. I remember folks on the previous version of this thread asking if anyone had tried this. there were rumours of others having done it, but no conclusive proof. Well done. (hope the sticky tape stays stuck!)
Zardoz wrote: » I have the original GMT ,I'll try it on that .
Kenny Powers wrote: » Thanks for the update man, I see champ has a post on the OATV fourm but there isn't much support there.
Zardoz wrote: » I tried out Champs Openatv image on my GMT v1 and unfortunately it had the same recording issues. It only happened when I was trying to record something on the terrestrial tuner and switched to sat or vica versa .After the recording ended or was stopped I'd lose either Sat or Terrestrial channels. When trying to restart the gui ,it also said recordings were in progress when they werent. I also had a few other bugs The time and date was also wrong on the receiver ,the audio levels sometimes froze and timeshift was a bit iffy. The interface is nice and the picture had more punch than Hyperion which has a very high gamma setting for some reason ,making the picture too dark.
championc wrote: » For any who are interested, I just updated my image again to include a NTP time update fix, and have removed the original CrossEPG database which I had saved to the box, so it will free up some memory.
Zardoz wrote: » Does it matter if you install the Alien 2 backup on a Triplex ?
Zardoz wrote: » I noticed that there was only 20Mb of Flash memory free on your previous backup which seems very little ,its normally ~50Mb on any other image I've used . Is this normal for OpenATV ? Edit ,just installed a nightly build and there is 64Mb of Flash free
cork_south wrote: » Went from OpenATV 4.2 to FreshPots Hv4.5 last night and everything is working perfectly again. Great image.
Fresh Pots wrote: » Both the same box under the hood so you can flash images for one box on the other. I have one of each and often copy the image from one and put it on the other.
As you add the plugins, you eat up memory. So if you start with my image, I would strongly recommend removing all plugins that you don't need or use. The more you delete, the nearer you'll get back to the magic 64mb
Lads, Has there been any fix on the low audio issue?? Using fresh pots image by the way!
stevie09 wrote: » Evening all, just setting my box up using Champions OpenAR-P AA2/7162 Image, everything going great, but since I refreshed the bouquets, the cool epg is showing extra data numbers in brackets and type of program [Drama]. It looks very untidy how can I switch it off? I have re-flashed the box but its still there........ Any ideas would be great. thanks Steve
Kenny Powers wrote: » Check your cross epg settings sounds like its downloading the xml
root@amikoalien:~/logs# enigma2 Processor: STx7105 Processor: STx7105 PYTHONPATH: /usr/lib/enigma2/python + (1) Background File Eraser + (5) Tuxtxt + (8) graphics acceleration manager STMFB accel interface available + (9) GFBDC 15360k total video mem 7260k usable video mem 5640kB available for acceleration surfaces. resolution: 720 x 576 x 32 (stride: 2880) + (9) gLCDDC found OLED display! lcd buffer 0x7314c0 8448 bytes, stride 132 LCD resolution: 132 x 64 x 8 (stride: 132) + (9) Font Render Class [FONT] initializing lib... [FONT] loading fonts... [FONT] Intializing font cache, using max. 4MB... + (10) gRC RC thread created successfully + (15) eWindowStyleManager + (20) DVB-CI UI + (20) UHF Modulator couldnt open /dev/rfmod0!!!! + (20) RC Input layer + (20) misc options + (20) AVSwitch Driver couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed! + (21) input device driver Input device "fulan front panel buttons" is a remotecontrol Input device "TDT RC event driver" is a keyboard Input device "remote control" is a remotecontrol Found 3 input devices. + (22) Hdmi CEC driver + (30) eActionMap + (35) CI Slots scanning for common interfaces.. eDVBCIInterfaces->setInputSource(0, 0) eDVBCIInterfaces->setInputSource(1, 1) done, found 0 common interface slots + (35) CA handler + (40) eServiceCenter settings instance. + (41) eServiceFactoryDVD + (41) eServiceFactoryHDMI + (41) eServiceFactoryM2TS + (41) eServiceFactoryMP3 + (41) eServiceFactoryFS + (41) eServiceFactoryDVB + (41) Encoders + (41) Stream server reached rl 70 ---- opening lame channel db reading services (version 4) loaded 81 channels/transponders and 1103 services scanning for frontends.. opening frontend 0 close frontend 0 opening frontend 1 close frontend 1 opening frontend 2 close frontend 2 boxtype detection via /proc/stb/info not possible... use fallback via demux count! found 1 adapter, 3 frontends(3 sim) and 4 demux, boxtype 0 RTC not ready... wait for transponder time [EPGC] Initialized EPGCache (wait for setCacheFile call now) Loading spinners... [ePNG] couldn't open /usr/share/enigma2/spinner/wait10.png found 9 spinner! executing main setIoPrio best-effort level 3 ok Failed to open /dev/dbox/fp0 [Harddisk] enumerating block devices... [Harddisk] enumerating network mounts... Reading satellites.xml main thread is non-idle! display spinner! Reading cables.xml Reading terrestrial.xml sec config cleared setSlotInfo for dvb frontend 0 to slotid 0, descr Tuner3-T/T2(T/T2/C), need rotorworkaround No, enabled Yes, DVB-S2 No setSlotInfo for dvb frontend 1 to slotid 1, descr Tuner1-Sat, need rotorworkaround No, enabled Yes, DVB-S2 Yes setSlotInfo for dvb frontend 2 to slotid 2, descr Tuner2-Sat, need rotorworkaround No, enabled Yes, DVB-S2 Yes slot: 1 configmode: simple diseqcmode: single slot: 2 configmode: equal sec config completed [NimManager] slotname = A, slotdescription = Tuner3-T/T2(T/T2/C), multitype = False [NimManager] slotname = B, slotdescription = Tuner1-Sat, multitype = False [NimManager] slotname = C, slotdescription = Tuner2-Sat, multitype = False [Picon] adding path: /usr/share/enigma2/picon/ [Time By]: NTP [eDVBLocalTimeHandler] invalid system time, refuse to disable transponder time sync [EPGC] time updated.. but cache file not set yet.. dont start epg!! [FONT] adding font /usr/share/fonts/Roboto-Bold.ttf...OK (Regular) [FONT] adding font /usr/share/fonts/Roboto-BoldItalic.ttf...OK (Italic) [FONT] adding font /usr/share/fonts/Roboto-Black.ttf...OK (Bold) [FONT] adding font /usr/share/fonts/Roboto-BlackItalic.ttf...OK (Boldit) [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont) [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD) [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement) [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console) 3660kB available for acceleration surfaces. resolution: 1280 x 720 x 32 (stride: 5120) [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00_templates.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00a_InfoBar.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00b_SecondInfoBar.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00c_SecondInfoBarECM.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00d_InfoBarLite.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00e_ChannelSelection.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00f_MoviePlayer.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00g_EMC.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_01_openatv.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_02_display.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_03_plugins.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_04_check.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_05_screens_unchecked.xml [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD) [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement) [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console) [FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed) [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Arial) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (Regular) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (RegularLight) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (SetrixHD) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/meteocons.ttf...OK (Meteo) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (global_title) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (global_button) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (global_clock) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (global_large) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (global_small) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (global_menu) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (screen_label) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (screen_text) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (screen_info) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (epg_event) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (epg_text) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (epg_info) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (infobar_event) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (infobar_text) [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subs) [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD) [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device > Activating keymap: Default (US) Activating language English (US) Selected language does not exist! Traceback (most recent call last): File "/usr/lib/enigma2/python/mytest.py", line 730, in <module> Components.AVSwitch.InitAVSwitch() File "/usr/lib/enigma2/python/Components/AVSwitch.py", line 371, in InitAVSwitch NameError: global name 'ngettext' is not defined ---- saving lame channel db saved 81 channels and 1103 services! release cached channel (timer timeout) - (41) eServiceFactoryDVD - (41) eServiceFactoryHDMI - (41) eServiceFactoryM2TS - (41) eServiceFactoryMP3 - (41) eServiceFactoryFS - (41) eServiceFactoryDVB - (41) Encoders - (41) Stream server - (40) eServiceCenter clear instance - (35) CI Slots - (35) CA handler - (30) eActionMap - (22) Hdmi CEC driver - (21) input device driver - (20) DVB-CI UI - (20) UHF Modulator - (20) RC Input layer - (20) misc options - (20) AVSwitch Driver - (15) eWindowStyleManager - (10) gRC waiting for gRC thread shutdown gRC thread has finished - (9) GFBDC - (9) gLCDDC - (9) Font Render Class - (8) graphics acceleration manager - (5) Tuxtxt - (1) Background File Eraser reached rl -1
root@amikoalien:~# enigma2 Processor: STx7105 Processor: STx7105 PYTHONPATH: /usr/lib/enigma2/python + (1) Background File Eraser + (5) Tuxtxt + (8) graphics acceleration manager STMFB accel interface available + (9) GFBDC 15360k total video mem 7260k usable video mem 5640kB available for acceleration surfaces. resolution: 720 x 576 x 32 (stride: 2880) + (9) gLCDDC found OLED display! lcd buffer 0x731118 8448 bytes, stride 132 LCD resolution: 132 x 64 x 8 (stride: 132) + (9) Font Render Class [FONT] initializing lib... [FONT] loading fonts... [FONT] Intializing font cache, using max. 4MB... + (10) gRC RC thread created successfully + (15) eWindowStyleManager + (20) DVB-CI UI + (20) UHF Modulator couldnt open /dev/rfmod0!!!! + (20) RC Input layer + (20) misc options + (20) AVSwitch Driver couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed! + (21) input device driver Input device "fulan front panel buttons" is a remotecontrol Input device "TDT RC event driver" is a keyboard Input device "remote control" is a remotecontrol Found 3 input devices. + (22) Hdmi CEC driver + (30) eActionMap + (35) CI Slots scanning for common interfaces.. eDVBCIInterfaces->setInputSource(0, 0) eDVBCIInterfaces->setInputSource(1, 1) done, found 0 common interface slots + (35) CA handler + (40) eServiceCenter settings instance. + (41) eServiceFactoryDVD + (41) eServiceFactoryHDMI + (41) eServiceFactoryM2TS + (41) eServiceFactoryMP3 + (41) eServiceFactoryFS + (41) eServiceFactoryDVB + (41) Encoders + (41) Stream server reached rl 70 ---- opening lame channel db reading services (version 4) loaded 81 channels/transponders and 1103 services scanning for frontends.. opening frontend 0 close frontend 0 opening frontend 1 close frontend 1 opening frontend 2 close frontend 2 boxtype detection via /proc/stb/info not possible... use fallback via demux count! found 1 adapter, 3 frontends(3 sim) and 4 demux, boxtype 0 Use valid Linux Time :) (RTC?) [EPGC] Initialized EPGCache (wait for setCacheFile call now) Loading spinners... [ePNG] couldn't open /usr/share/enigma2/spinner/wait10.png found 9 spinner! executing main setIoPrio best-effort level 3 ok Failed to open /dev/dbox/fp0 [Harddisk] enumerating block devices... [Harddisk] enumerating network mounts... new Network Mount logs -> /media/autofs/logs main thread is non-idle! display spinner! Reading satellites.xml Reading cables.xml Reading terrestrial.xml sec config cleared setSlotInfo for dvb frontend 0 to slotid 0, descr Tuner3-T/T2(T/T2/C), need rotorworkaround No, enabled Yes, DVB-S2 No setSlotInfo for dvb frontend 1 to slotid 1, descr Tuner1-Sat, need rotorworkaround No, enabled Yes, DVB-S2 Yes setSlotInfo for dvb frontend 2 to slotid 2, descr Tuner2-Sat, need rotorworkaround No, enabled Yes, DVB-S2 Yes slot: 1 configmode: simple diseqcmode: single slot: 2 configmode: equal sec config completed [NimManager] slotname = A, slotdescription = Tuner3-T/T2(T/T2/C), multitype = False [NimManager] slotname = B, slotdescription = Tuner1-Sat, multitype = False [NimManager] slotname = C, slotdescription = Tuner2-Sat, multitype = False [Picon] adding path: /usr/share/enigma2/picon/ [Time By]: NTP [eDVBLocalTimeHandler] disable sync local time with transponder time! [EPGC] time updated.. but cache file not set yet.. dont start epg!! [NTPDATE] save /etc/default/ntpdate [FONT] adding font /usr/share/fonts/Roboto-Bold.ttf...OK (Regular) [FONT] adding font /usr/share/fonts/Roboto-BoldItalic.ttf...OK (Italic) [FONT] adding font /usr/share/fonts/Roboto-Black.ttf...OK (Bold) [FONT] adding font /usr/share/fonts/Roboto-BlackItalic.ttf...OK (Boldit) [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont) [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD) [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement) [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console) 3660kB available for acceleration surfaces. resolution: 1280 x 720 x 32 (stride: 5120) [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00_templates.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00a_InfoBar.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00b_SecondInfoBar.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00c_SecondInfoBarECM.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00d_InfoBarLite.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00e_ChannelSelection.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00f_MoviePlayer.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00g_EMC.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_01_openatv.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_02_display.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_03_plugins.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_04_check.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_05_screens_unchecked.xml [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD) [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement) [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console) [FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed) [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Arial) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (Regular) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (RegularLight) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (SetrixHD) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/meteocons.ttf...OK (Meteo) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (global_title) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (global_button) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (global_clock) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (global_large) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (global_small) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (global_menu) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (screen_label) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (screen_text) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (screen_info) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (epg_event) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (epg_text) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (epg_info) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (infobar_event) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (infobar_text) [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subs) [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD) [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device > Activating keymap: Default (US) Activating language English (US) [VideoMode] setting aspect: 16:9 [VideoMode] setting wss: auto [VideoMode] setting policy: panscan [VideoMode] setMode - port: HDMI, mode: 720p, rate: 50Hz [EPGC Loads] Poller enabled. [EPGC Save] Poller enabled. [EPGC] setCacheFile read/write epg data from/to '/etc/enigma2/epg.dat' [EPGC] time updated.. start EPG Mainloop [EPGC] /etc/enigma2/epg.dat not found, try /epg.dat setLCDBrightness 25 setLCDBrightness 127 setLCDScrollspeed 150 setLCDMode 1 Setting OSD position: 0 720 0 576 Setting OSD alpha: 255 [EPGC Save] Poller enabled. [EPGC Loads] Poller enabled. [Ipkg] Added to OPKG destinations: / No 'mechanize' module [XBMCAddonsA] fallback to default translation for white [XBMCAddonsA] fallback to default translation for grey [XBMCAddonsA] fallback to default translation for yellow [XBMCAddonsA] fallback to default translation for white [XBMCAddonsA] fallback to default translation for default [XBMCAddonsA] fallback to default translation for large [XBMCAddonsA] fallback to default translation for small [XBMCAddonsA] fallback to default translation for black [XBMCAddonsA] fallback to default translation for blue [XBMCAddonsA] fallback to default translation for default [XBMCAddonsA] fallback to default translation for skin2 [XBMCAddonsA] fallback to default translation for Not assigned [XBMCAddonsA] fallback to default translation for Key help [SKLDR] Loading skin /usr/lib/enigma2/python/Plugins/Extensions/XBMCAddons/skin/skin.xml Plugin Extensions/WebInterface failed to load: No module named plugin [AutoBouquets] set language to en [AutoBouquets] fallback to default translation for default [AutoBouquets] fallback to default translation for style 1 [AutoBouquets] fallback to default translation for style 2 [AutoBouquets] fallback to default translation for style 3 [AutoBouquets] fallback to default translation for style 4 [AutoBouquets] fallback to default translation for style 5 [AutoBouquets] fallback to default translation for default [AutoBouquets] fallback to default translation for HD First [AutoBouquets] fallback to default translation for Sort 1 [AutoBouquets] fallback to default translation for Sort 2 [AutoBouquets] fallback to default translation for Sort 3 [AutoBouquets] fallback to default translation for no [AutoBouquets] fallback to default translation for /usr/share/enigma2/picon [AutoBouquets] fallback to default translation for /picon [AutoBouquets] fallback to default translation for /media/usb/picon [AutoBouquets] fallback to default translation for /media/hdd/picon [AutoBouquets] fallback to default translation for /media/cf/picon [AutoBouquets] fallback to default translation for /usr/share/enigma2/picon [AutoBouquets] fallback to default translation for /picon [AutoBouquets] fallback to default translation for /media/usb/picon [AutoBouquets] fallback to default translation for /media/hdd/picon [AutoBouquets] fallback to default translation for /media/cf/picon [AutoBouquets] fallback to default translation for Daily [AutoBouquets] fallback to default translation for Weekly [AutoBouquets] fallback to default translation for 30 Days [AutoBouquets] fallback to default translation for AutoBouquets E2 [AutoBouquets] fallback to default translation for 28.2e stream bouquet downloader [AutoBouquets] fallback to default translation for AutoBouquets Downloader [AutoBouquets] fallback to default translation for 28.2e stream bouquet downloader valis_enigma.ttf DejaVuSans.ttf andale.ttf Roboto-Black.ttf skymedium.ttf time.ttf Roboto-Bold.ttf ae_AlMateen.ttf lcd.ttf Roboto-BlackItalic.ttf tuxtxt.otb tuxtxt.ttf Roboto-BoldItalic.ttf nmsbd.ttf md_khmurabi_10.ttf [FONT] adding font /usr/lib/enigma2/python/Plugins/Extensions/TSmedia/interface/font_default.otf...OK (RegularIPTV) [Info-Panel] machinebrand: Amiko [Info-Panel] machinename: Alien 2 [Info-Panel] oem name: fulan [Info-Panel] boxtype: amikoalien [CacheFlush] fallback to default translation for plugins [CacheFlush] fallback to default translation for menu-system [CacheFlush] fallback to default translation for extensions [CacheFlush] fallback to default translation for event info [CacheFlush] fallback to default translation for Automatic cache flushing [CrossEPG] set language to en [CrossEPG_Loader] patch crossepg v2.1 found [CrossEPG_Loader] patch epgcache.load() found [CrossEPG_Loader] patch Oudeis found --> applying pep values couldn't apply pep values. [AutoTimer] Auto Poll Enabled [HddManager] MountOnStart [HddManager] not found devices [Alternative SoftCam Manager] /usr/bin/cam/oscam_10078 -bc /var/keys/ starting hotplug handler [SH4BoosterControl] sessionstart setLCDBrightness 127 [NAVIGATION] USE DEEPSTAND-WORKAROUND FOR THIS BOXTYPE (amikoalien) !! ================================================================================== [NAVIGATION] getNextRecordingTime= -1 [NAVIGATION] nextRecordTimerAfterEventActionAuto= False [NAVIGATION] current Time=1420028182.12 [NAVIGATION] timediff=1420028183.12 ================================================================================== [NAVIGATION] getNextPowerManagerTime= -1 [NAVIGATION] nextPowerManagerAfterEventActionAuto= False [NAVIGATION] current Time=1420028182.13 [NAVIGATION] timediff=1420028183.13 ================================================================================== [NAVIGATION] wasTimerWakeup = False [AutoBouquets] AutoStart Enabled [AutoBouquets] AutoBouquets Schedule Disabled at (now=Wed 31 Dec 2014 12:16:22 GMT) EMC: +++ EMC V3.7.4beta20131015 startup [CacheFlush] fallback to default translation for pagecache [CacheFlush] fallback to default translation for dentries and inodes [CacheFlush] fallback to default translation for pagecache, dentries and inodes [CacheFlush] fallback to default translation for Default [CacheFlush] fallback to default translation for Starting [CacheFlush] set min_free_kbytes to 1024 kB [SKIN] Parsing embedded skin <embedded-in-'CacheFlushAutoScreen'> [CacheFlush] fallback to default translation for Started [AutoBouquetsMaker] AutoStart Enabled [AutoBouquetsMaker] AutoBouquetsMaker Schedule Disabled at Wed 31 Dec 2014 12:16:22 GMT [SH4BoosterControl] sessionstart [SH4BoosterControl] Starting !! [SH4BoosterControl] initializing [SH4BoosterControl] initBooster [OSD Adjustment] Set Screen on startup [AutomaticVolumeAdjustment] Starting AutomaticVolumeAdjustment... [AutomaticVolumeAdjustmentConfig] Loading config file... [AutomaticVolumeAdjustmentConfig] Loaded 0 entries from config file... [AutomaticVolumeAdjustment] initialize config values... [(100, <class 'Screens.InfoBar.InfoBar'>)] MetrixHDWeatherStandalone lookup for ID 676757 Cant get weather data: URLError(gaierror(-2, 'Name or service not known'),) warning, skin is missing element epg_description in <class 'Screens.InfoBarGenerics.SecondInfoBar'> warning, skin is missing element channel in <class 'Screens.InfoBarGenerics.SecondInfoBar'> [SCREENNAME] RdsInfoDisplaySummary warning, skin is missing element From in <class 'Screens.Dish.Dish'> warning, skin is missing element Goto in <class 'Screens.Dish.Dish'> warning, skin is missing element tunerName in <class 'Screens.Dish.Dish'> warning, skin is missing element turnSpeed in <class 'Screens.Dish.Dish'> warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'> warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'> warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'> warning, skin is missing element Tuner in <class 'Screens.Dish.Dish'> warning, skin is missing element PTSSeekPointer in <class 'Screens.PVRState.TimeshiftState'> warning, skin is missing element statusicon in <class 'Screens.PVRState.TimeshiftState'> warning, skin is missing element eventname in <class 'Screens.PVRState.TimeshiftState'> warning, skin is missing element PTSSeekBack in <class 'Screens.PVRState.TimeshiftState'> warning, skin is missing element speed in <class 'Screens.PVRState.TimeshiftState'> RemovePopup, id = ZapError MetrixHDWeatherStandalone lookup for ID 676757 Cant get weather data: URLError(gaierror(-2, 'Name or service not known'),) [SCREENNAME] RdsInfoDisplay [SCREENNAME] InfoBarSummary [SCREENNAME] InfoBar setValue 50 Setvolume: 50 50 (raw) Setvolume: 32 32 (-1db) lastshutdown=False (True = last shutdown was OK) NOK shutdown action=normal bootup action=normal killall: showiframe: no process killed [LogManager] Trim Poll Started [LogManager] Trash Poll Started [LogManager] probing folders [LogManager] found following log's: ['/media/autofs/logs', '/home/root/logs'] [LogManager] looking in: /media/autofs/logs [LogManager] looking in: /home/root/logs [NTP]: Updating [CrossEPG_Loader] loading data with crossepg patch v2 [EPGC] start crossepg import [EPGC] cannot open crossepg headers db EMC: Setting EPG language: en_US [CAMSTARTER] No Cam to Start, Exit playing 1:0:C:834:3EA:2174:EEEE0000:0:0:0: [SCREENNAME] InfoBar not enough diskspace for timeshift! (less than 1GB) not enough diskspace for timeshift! (less than 1GB) setPixmapNum(0) failed! defined pixmaps: [] not enough diskspace for timeshift! (less than 1GB) not enough diskspace for timeshift! (less than 1GB) not enough diskspace for timeshift! (less than 1GB) setPixmapNum(0) failed! defined pixmaps: [] not enough diskspace for timeshift! (less than 1GB) not enough diskspace for timeshift! (less than 1GB) RemovePopup, id = ZapError allocate channel.. 03ea:2174 opening frontend 0 (0)tune OURSTATE: tuning allocate Channel: res 0 [eDVBCIInterfaces] addPMTHandler 1:0:C:834:3EA:2174:EEEE0000:0:0:0: allocate demux [NTP]: setting E2 time: 1420028187.57 set RTC to 2014/12/31 12:16 (rtc_offset = 0 sec.) poll: unhandled POLLERR/HUP/NVAL for fd 27(16) poll: unhandled POLLERR/HUP/NVAL for fd 37(17) poll: unhandled POLLERR/HUP/NVAL for fd 41(16) poll: unhandled POLLERR/HUP/NVAL for fd 43(16) poll: unhandled POLLERR/HUP/NVAL for fd 46(16) job Components.Task.Job name=LogManager #tasks=1 completed with [] in None [EPGC] Saving EPGCache. [VLC] Checking for buildin servicets ... no [VLC] Checking for existing and usable servicets.so ... No module named servicets [VLC] Checking for usable gstreamer service ... yes EMC: Next trashcan cleanup in 764 minutes [SEC] startTuneTimeout 5000 192.168 0.0.0.0 SerienRecorder plugin not found ER plugin not found [OpenWebif] no plugins to load [OpenWebif] started on 80 poll: unhandled POLLERR/HUP/NVAL for fd 28(16) job Components.Task.Job name=EPG Cache Check #tasks=2 completed with [] in None [EPGC] Refreshing EPGCache. [EPGC] /etc/enigma2/epg.dat not found, try /epg.dat [SEC] setVoltage 0 [SEC] setFrontend 1 setting frontend 0 (0)fe event: status 0, inversion off, m_tuning 1 job Components.Task.Job name=EPG Cache Check #tasks=2 completed with [] in None (0)fe event: status 1f, inversion off, m_tuning 2 OURSTATE: ok [eDVBLocalTimerHandler] channel 0x2682040 running [eEPGCache] channel 0x2682040 running [EPGC] next update in 2 sec stop release channel timer ok ... now we start!! eventNewProgramInfo 0 0 have 0 video stream(s), and 0 audio stream(s), and the pcr pid is 1fff, and the text pid is ffffffff allocate demux TuxTxt cache cleared PES filter: DMX_SET_PES_FILTER - Invalid argument
witnessmenow wrote: » Boot loop happening on my Girfriend's Dads box again. I have included the logs below. Any idea what could be up? EDIT: To give some more info if it helps: At the moment this box has no external storage. It gets powered off every night (as in the the extension lead that it is plugged into is plugged out) I'm going to install Champs image from yesterday now.root@amikoalien:~/logs# enigma2 Processor: STx7105 Processor: STx7105 PYTHONPATH: /usr/lib/enigma2/python + (1) Background File Eraser + (5) Tuxtxt + (8) graphics acceleration manager STMFB accel interface available + (9) GFBDC 15360k total video mem 7260k usable video mem 5640kB available for acceleration surfaces. resolution: 720 x 576 x 32 (stride: 2880) + (9) gLCDDC found OLED display! lcd buffer 0x7314c0 8448 bytes, stride 132 LCD resolution: 132 x 64 x 8 (stride: 132) + (9) Font Render Class [FONT] initializing lib... [FONT] loading fonts... [FONT] Intializing font cache, using max. 4MB... + (10) gRC RC thread created successfully + (15) eWindowStyleManager + (20) DVB-CI UI + (20) UHF Modulator couldnt open /dev/rfmod0!!!! + (20) RC Input layer + (20) misc options + (20) AVSwitch Driver couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed! + (21) input device driver Input device "fulan front panel buttons" is a remotecontrol Input device "TDT RC event driver" is a keyboard Input device "remote control" is a remotecontrol Found 3 input devices. + (22) Hdmi CEC driver + (30) eActionMap + (35) CI Slots scanning for common interfaces.. eDVBCIInterfaces->setInputSource(0, 0) eDVBCIInterfaces->setInputSource(1, 1) done, found 0 common interface slots + (35) CA handler + (40) eServiceCenter settings instance. + (41) eServiceFactoryDVD + (41) eServiceFactoryHDMI + (41) eServiceFactoryM2TS + (41) eServiceFactoryMP3 + (41) eServiceFactoryFS + (41) eServiceFactoryDVB + (41) Encoders + (41) Stream server reached rl 70 ---- opening lame channel db reading services (version 4) loaded 81 channels/transponders and 1103 services scanning for frontends.. opening frontend 0 close frontend 0 opening frontend 1 close frontend 1 opening frontend 2 close frontend 2 boxtype detection via /proc/stb/info not possible... use fallback via demux count! found 1 adapter, 3 frontends(3 sim) and 4 demux, boxtype 0 RTC not ready... wait for transponder time [EPGC] Initialized EPGCache (wait for setCacheFile call now) Loading spinners... [ePNG] couldn't open /usr/share/enigma2/spinner/wait10.png found 9 spinner! executing main setIoPrio best-effort level 3 ok Failed to open /dev/dbox/fp0 [Harddisk] enumerating block devices... [Harddisk] enumerating network mounts... Reading satellites.xml main thread is non-idle! display spinner! Reading cables.xml Reading terrestrial.xml sec config cleared setSlotInfo for dvb frontend 0 to slotid 0, descr Tuner3-T/T2(T/T2/C), need rotorworkaround No, enabled Yes, DVB-S2 No setSlotInfo for dvb frontend 1 to slotid 1, descr Tuner1-Sat, need rotorworkaround No, enabled Yes, DVB-S2 Yes setSlotInfo for dvb frontend 2 to slotid 2, descr Tuner2-Sat, need rotorworkaround No, enabled Yes, DVB-S2 Yes slot: 1 configmode: simple diseqcmode: single slot: 2 configmode: equal sec config completed [NimManager] slotname = A, slotdescription = Tuner3-T/T2(T/T2/C), multitype = False [NimManager] slotname = B, slotdescription = Tuner1-Sat, multitype = False [NimManager] slotname = C, slotdescription = Tuner2-Sat, multitype = False [Picon] adding path: /usr/share/enigma2/picon/ [Time By]: NTP [eDVBLocalTimeHandler] invalid system time, refuse to disable transponder time sync [EPGC] time updated.. but cache file not set yet.. dont start epg!! [FONT] adding font /usr/share/fonts/Roboto-Bold.ttf...OK (Regular) [FONT] adding font /usr/share/fonts/Roboto-BoldItalic.ttf...OK (Italic) [FONT] adding font /usr/share/fonts/Roboto-Black.ttf...OK (Bold) [FONT] adding font /usr/share/fonts/Roboto-BlackItalic.ttf...OK (Boldit) [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont) [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD) [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement) [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console) 3660kB available for acceleration surfaces. resolution: 1280 x 720 x 32 (stride: 5120) [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00_templates.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00a_InfoBar.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00b_SecondInfoBar.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00c_SecondInfoBarECM.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00d_InfoBarLite.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00e_ChannelSelection.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00f_MoviePlayer.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00g_EMC.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_01_openatv.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_02_display.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_03_plugins.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_04_check.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_05_screens_unchecked.xml [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD) [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement) [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console) [FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed) [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Arial) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (Regular) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (RegularLight) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (SetrixHD) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/meteocons.ttf...OK (Meteo) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (global_title) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (global_button) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (global_clock) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (global_large) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (global_small) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (global_menu) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (screen_label) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (screen_text) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (screen_info) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (epg_event) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (epg_text) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (epg_info) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (infobar_event) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (infobar_text) [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subs) [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD) [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device > Activating keymap: Default (US) Activating language English (US) Selected language does not exist! Traceback (most recent call last): File "/usr/lib/enigma2/python/mytest.py", line 730, in <module> Components.AVSwitch.InitAVSwitch() File "/usr/lib/enigma2/python/Components/AVSwitch.py", line 371, in InitAVSwitch NameError: global name 'ngettext' is not defined ---- saving lame channel db saved 81 channels and 1103 services! release cached channel (timer timeout) - (41) eServiceFactoryDVD - (41) eServiceFactoryHDMI - (41) eServiceFactoryM2TS - (41) eServiceFactoryMP3 - (41) eServiceFactoryFS - (41) eServiceFactoryDVB - (41) Encoders - (41) Stream server - (40) eServiceCenter clear instance - (35) CI Slots - (35) CA handler - (30) eActionMap - (22) Hdmi CEC driver - (21) input device driver - (20) DVB-CI UI - (20) UHF Modulator - (20) RC Input layer - (20) misc options - (20) AVSwitch Driver - (15) eWindowStyleManager - (10) gRC waiting for gRC thread shutdown gRC thread has finished - (9) GFBDC - (9) gLCDDC - (9) Font Render Class - (8) graphics acceleration manager - (5) Tuxtxt - (1) Background File Eraser reached rl -1 EDIT: For comparison here is the output of the box now that is working again:root@amikoalien:~# enigma2 Processor: STx7105 Processor: STx7105 PYTHONPATH: /usr/lib/enigma2/python + (1) Background File Eraser + (5) Tuxtxt + (8) graphics acceleration manager STMFB accel interface available + (9) GFBDC 15360k total video mem 7260k usable video mem 5640kB available for acceleration surfaces. resolution: 720 x 576 x 32 (stride: 2880) + (9) gLCDDC found OLED display! lcd buffer 0x731118 8448 bytes, stride 132 LCD resolution: 132 x 64 x 8 (stride: 132) + (9) Font Render Class [FONT] initializing lib... [FONT] loading fonts... [FONT] Intializing font cache, using max. 4MB... + (10) gRC RC thread created successfully + (15) eWindowStyleManager + (20) DVB-CI UI + (20) UHF Modulator couldnt open /dev/rfmod0!!!! + (20) RC Input layer + (20) misc options + (20) AVSwitch Driver couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed! + (21) input device driver Input device "fulan front panel buttons" is a remotecontrol Input device "TDT RC event driver" is a keyboard Input device "remote control" is a remotecontrol Found 3 input devices. + (22) Hdmi CEC driver + (30) eActionMap + (35) CI Slots scanning for common interfaces.. eDVBCIInterfaces->setInputSource(0, 0) eDVBCIInterfaces->setInputSource(1, 1) done, found 0 common interface slots + (35) CA handler + (40) eServiceCenter settings instance. + (41) eServiceFactoryDVD + (41) eServiceFactoryHDMI + (41) eServiceFactoryM2TS + (41) eServiceFactoryMP3 + (41) eServiceFactoryFS + (41) eServiceFactoryDVB + (41) Encoders + (41) Stream server reached rl 70 ---- opening lame channel db reading services (version 4) loaded 81 channels/transponders and 1103 services scanning for frontends.. opening frontend 0 close frontend 0 opening frontend 1 close frontend 1 opening frontend 2 close frontend 2 boxtype detection via /proc/stb/info not possible... use fallback via demux count! found 1 adapter, 3 frontends(3 sim) and 4 demux, boxtype 0 Use valid Linux Time :) (RTC?) [EPGC] Initialized EPGCache (wait for setCacheFile call now) Loading spinners... [ePNG] couldn't open /usr/share/enigma2/spinner/wait10.png found 9 spinner! executing main setIoPrio best-effort level 3 ok Failed to open /dev/dbox/fp0 [Harddisk] enumerating block devices... [Harddisk] enumerating network mounts... new Network Mount logs -> /media/autofs/logs main thread is non-idle! display spinner! Reading satellites.xml Reading cables.xml Reading terrestrial.xml sec config cleared setSlotInfo for dvb frontend 0 to slotid 0, descr Tuner3-T/T2(T/T2/C), need rotorworkaround No, enabled Yes, DVB-S2 No setSlotInfo for dvb frontend 1 to slotid 1, descr Tuner1-Sat, need rotorworkaround No, enabled Yes, DVB-S2 Yes setSlotInfo for dvb frontend 2 to slotid 2, descr Tuner2-Sat, need rotorworkaround No, enabled Yes, DVB-S2 Yes slot: 1 configmode: simple diseqcmode: single slot: 2 configmode: equal sec config completed [NimManager] slotname = A, slotdescription = Tuner3-T/T2(T/T2/C), multitype = False [NimManager] slotname = B, slotdescription = Tuner1-Sat, multitype = False [NimManager] slotname = C, slotdescription = Tuner2-Sat, multitype = False [Picon] adding path: /usr/share/enigma2/picon/ [Time By]: NTP [eDVBLocalTimeHandler] disable sync local time with transponder time! [EPGC] time updated.. but cache file not set yet.. dont start epg!! [NTPDATE] save /etc/default/ntpdate [FONT] adding font /usr/share/fonts/Roboto-Bold.ttf...OK (Regular) [FONT] adding font /usr/share/fonts/Roboto-BoldItalic.ttf...OK (Italic) [FONT] adding font /usr/share/fonts/Roboto-Black.ttf...OK (Bold) [FONT] adding font /usr/share/fonts/Roboto-BlackItalic.ttf...OK (Boldit) [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont) [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD) [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement) [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console) 3660kB available for acceleration surfaces. resolution: 1280 x 720 x 32 (stride: 5120) [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00_templates.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00a_InfoBar.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00b_SecondInfoBar.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00c_SecondInfoBarECM.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00d_InfoBarLite.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00e_ChannelSelection.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00f_MoviePlayer.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00g_EMC.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_01_openatv.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_02_display.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_03_plugins.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_04_check.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_05_screens_unchecked.xml [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD) [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement) [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console) [FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed) [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Arial) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (Regular) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (RegularLight) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (SetrixHD) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/meteocons.ttf...OK (Meteo) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (global_title) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (global_button) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (global_clock) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (global_large) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (global_small) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (global_menu) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (screen_label) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (screen_text) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (screen_info) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (epg_event) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (epg_text) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (epg_info) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (infobar_event) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (infobar_text) [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subs) [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD) [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device > Activating keymap: Default (US) Activating language English (US) [VideoMode] setting aspect: 16:9 [VideoMode] setting wss: auto [VideoMode] setting policy: panscan [VideoMode] setMode - port: HDMI, mode: 720p, rate: 50Hz [EPGC Loads] Poller enabled. [EPGC Save] Poller enabled. [EPGC] setCacheFile read/write epg data from/to '/etc/enigma2/epg.dat' [EPGC] time updated.. start EPG Mainloop [EPGC] /etc/enigma2/epg.dat not found, try /epg.dat setLCDBrightness 25 setLCDBrightness 127 setLCDScrollspeed 150 setLCDMode 1 Setting OSD position: 0 720 0 576 Setting OSD alpha: 255 [EPGC Save] Poller enabled. [EPGC Loads] Poller enabled. [Ipkg] Added to OPKG destinations: / No 'mechanize' module [XBMCAddonsA] fallback to default translation for white [XBMCAddonsA] fallback to default translation for grey [XBMCAddonsA] fallback to default translation for yellow [XBMCAddonsA] fallback to default translation for white [XBMCAddonsA] fallback to default translation for default [XBMCAddonsA] fallback to default translation for large [XBMCAddonsA] fallback to default translation for small [XBMCAddonsA] fallback to default translation for black [XBMCAddonsA] fallback to default translation for blue [XBMCAddonsA] fallback to default translation for default [XBMCAddonsA] fallback to default translation for skin2 [XBMCAddonsA] fallback to default translation for Not assigned [XBMCAddonsA] fallback to default translation for Key help [SKLDR] Loading skin /usr/lib/enigma2/python/Plugins/Extensions/XBMCAddons/skin/skin.xml Plugin Extensions/WebInterface failed to load: No module named plugin [AutoBouquets] set language to en [AutoBouquets] fallback to default translation for default [AutoBouquets] fallback to default translation for style 1 [AutoBouquets] fallback to default translation for style 2 [AutoBouquets] fallback to default translation for style 3 [AutoBouquets] fallback to default translation for style 4 [AutoBouquets] fallback to default translation for style 5 [AutoBouquets] fallback to default translation for default [AutoBouquets] fallback to default translation for HD First [AutoBouquets] fallback to default translation for Sort 1 [AutoBouquets] fallback to default translation for Sort 2 [AutoBouquets] fallback to default translation for Sort 3 [AutoBouquets] fallback to default translation for no [AutoBouquets] fallback to default translation for /usr/share/enigma2/picon [AutoBouquets] fallback to default translation for /picon [AutoBouquets] fallback to default translation for /media/usb/picon [AutoBouquets] fallback to default translation for /media/hdd/picon [AutoBouquets] fallback to default translation for /media/cf/picon [AutoBouquets] fallback to default translation for /usr/share/enigma2/picon [AutoBouquets] fallback to default translation for /picon [AutoBouquets] fallback to default translation for /media/usb/picon [AutoBouquets] fallback to default translation for /media/hdd/picon [AutoBouquets] fallback to default translation for /media/cf/picon [AutoBouquets] fallback to default translation for Daily [AutoBouquets] fallback to default translation for Weekly [AutoBouquets] fallback to default translation for 30 Days [AutoBouquets] fallback to default translation for AutoBouquets E2 [AutoBouquets] fallback to default translation for 28.2e stream bouquet downloader [AutoBouquets] fallback to default translation for AutoBouquets Downloader [AutoBouquets] fallback to default translation for 28.2e stream bouquet downloader valis_enigma.ttf DejaVuSans.ttf andale.ttf Roboto-Black.ttf skymedium.ttf time.ttf Roboto-Bold.ttf ae_AlMateen.ttf lcd.ttf Roboto-BlackItalic.ttf tuxtxt.otb tuxtxt.ttf Roboto-BoldItalic.ttf nmsbd.ttf md_khmurabi_10.ttf [FONT] adding font /usr/lib/enigma2/python/Plugins/Extensions/TSmedia/interface/font_default.otf...OK (RegularIPTV) [Info-Panel] machinebrand: Amiko [Info-Panel] machinename: Alien 2 [Info-Panel] oem name: fulan [Info-Panel] boxtype: amikoalien [CacheFlush] fallback to default translation for plugins [CacheFlush] fallback to default translation for menu-system [CacheFlush] fallback to default translation for extensions [CacheFlush] fallback to default translation for event info [CacheFlush] fallback to default translation for Automatic cache flushing [CrossEPG] set language to en [CrossEPG_Loader] patch crossepg v2.1 found [CrossEPG_Loader] patch epgcache.load() found [CrossEPG_Loader] patch Oudeis found --> applying pep values couldn't apply pep values. [AutoTimer] Auto Poll Enabled [HddManager] MountOnStart [HddManager] not found devices [Alternative SoftCam Manager] /usr/bin/cam/oscam_10078 -bc /var/keys/ starting hotplug handler [SH4BoosterControl] sessionstart setLCDBrightness 127 [NAVIGATION] USE DEEPSTAND-WORKAROUND FOR THIS BOXTYPE (amikoalien) !! ================================================================================== [NAVIGATION] getNextRecordingTime= -1 [NAVIGATION] nextRecordTimerAfterEventActionAuto= False [NAVIGATION] current Time=1420028182.12 [NAVIGATION] timediff=1420028183.12 ================================================================================== [NAVIGATION] getNextPowerManagerTime= -1 [NAVIGATION] nextPowerManagerAfterEventActionAuto= False [NAVIGATION] current Time=1420028182.13 [NAVIGATION] timediff=1420028183.13 ================================================================================== [NAVIGATION] wasTimerWakeup = False [AutoBouquets] AutoStart Enabled [AutoBouquets] AutoBouquets Schedule Disabled at (now=Wed 31 Dec 2014 12:16:22 GMT) EMC: +++ EMC V3.7.4beta20131015 startup [CacheFlush] fallback to default translation for pagecache [CacheFlush] fallback to default translation for dentries and inodes [CacheFlush] fallback to default translation for pagecache, dentries and inodes [CacheFlush] fallback to default translation for Default [CacheFlush] fallback to default translation for Starting [CacheFlush] set min_free_kbytes to 1024 kB [SKIN] Parsing embedded skin <embedded-in-'CacheFlushAutoScreen'> [CacheFlush] fallback to default translation for Started [AutoBouquetsMaker] AutoStart Enabled [AutoBouquetsMaker] AutoBouquetsMaker Schedule Disabled at Wed 31 Dec 2014 12:16:22 GMT [SH4BoosterControl] sessionstart [SH4BoosterControl] Starting !! [SH4BoosterControl] initializing [SH4BoosterControl] initBooster [OSD Adjustment] Set Screen on startup [AutomaticVolumeAdjustment] Starting AutomaticVolumeAdjustment... [AutomaticVolumeAdjustmentConfig] Loading config file... [AutomaticVolumeAdjustmentConfig] Loaded 0 entries from config file... [AutomaticVolumeAdjustment] initialize config values... [(100, <class 'Screens.InfoBar.InfoBar'>)] MetrixHDWeatherStandalone lookup for ID 676757 Cant get weather data: URLError(gaierror(-2, 'Name or service not known'),) warning, skin is missing element epg_description in <class 'Screens.InfoBarGenerics.SecondInfoBar'> warning, skin is missing element channel in <class 'Screens.InfoBarGenerics.SecondInfoBar'> [SCREENNAME] RdsInfoDisplaySummary warning, skin is missing element From in <class 'Screens.Dish.Dish'> warning, skin is missing element Goto in <class 'Screens.Dish.Dish'> warning, skin is missing element tunerName in <class 'Screens.Dish.Dish'> warning, skin is missing element turnSpeed in <class 'Screens.Dish.Dish'> warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'> warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'> warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'> warning, skin is missing element Tuner in <class 'Screens.Dish.Dish'> warning, skin is missing element PTSSeekPointer in <class 'Screens.PVRState.TimeshiftState'> warning, skin is missing element statusicon in <class 'Screens.PVRState.TimeshiftState'> warning, skin is missing element eventname in <class 'Screens.PVRState.TimeshiftState'> warning, skin is missing element PTSSeekBack in <class 'Screens.PVRState.TimeshiftState'> warning, skin is missing element speed in <class 'Screens.PVRState.TimeshiftState'> RemovePopup, id = ZapError MetrixHDWeatherStandalone lookup for ID 676757 Cant get weather data: URLError(gaierror(-2, 'Name or service not known'),) [SCREENNAME] RdsInfoDisplay [SCREENNAME] InfoBarSummary [SCREENNAME] InfoBar setValue 50 Setvolume: 50 50 (raw) Setvolume: 32 32 (-1db) lastshutdown=False (True = last shutdown was OK) NOK shutdown action=normal bootup action=normal killall: showiframe: no process killed [LogManager] Trim Poll Started [LogManager] Trash Poll Started [LogManager] probing folders [LogManager] found following log's: ['/media/autofs/logs', '/home/root/logs'] [LogManager] looking in: /media/autofs/logs [LogManager] looking in: /home/root/logs [NTP]: Updating [CrossEPG_Loader] loading data with crossepg patch v2 [EPGC] start crossepg import [EPGC] cannot open crossepg headers db EMC: Setting EPG language: en_US [CAMSTARTER] No Cam to Start, Exit playing 1:0:C:834:3EA:2174:EEEE0000:0:0:0: [SCREENNAME] InfoBar not enough diskspace for timeshift! (less than 1GB) not enough diskspace for timeshift! (less than 1GB) setPixmapNum(0) failed! defined pixmaps: [] not enough diskspace for timeshift! (less than 1GB) not enough diskspace for timeshift! (less than 1GB) not enough diskspace for timeshift! (less than 1GB) setPixmapNum(0) failed! defined pixmaps: [] not enough diskspace for timeshift! (less than 1GB) not enough diskspace for timeshift! (less than 1GB) RemovePopup, id = ZapError allocate channel.. 03ea:2174 opening frontend 0 (0)tune OURSTATE: tuning allocate Channel: res 0 [eDVBCIInterfaces] addPMTHandler 1:0:C:834:3EA:2174:EEEE0000:0:0:0: allocate demux [NTP]: setting E2 time: 1420028187.57 set RTC to 2014/12/31 12:16 (rtc_offset = 0 sec.) poll: unhandled POLLERR/HUP/NVAL for fd 27(16) poll: unhandled POLLERR/HUP/NVAL for fd 37(17) poll: unhandled POLLERR/HUP/NVAL for fd 41(16) poll: unhandled POLLERR/HUP/NVAL for fd 43(16) poll: unhandled POLLERR/HUP/NVAL for fd 46(16) job Components.Task.Job name=LogManager #tasks=1 completed with [] in None [EPGC] Saving EPGCache. [VLC] Checking for buildin servicets ... no [VLC] Checking for existing and usable servicets.so ... No module named servicets [VLC] Checking for usable gstreamer service ... yes EMC: Next trashcan cleanup in 764 minutes [SEC] startTuneTimeout 5000 192.168 0.0.0.0 SerienRecorder plugin not found ER plugin not found [OpenWebif] no plugins to load [OpenWebif] started on 80 poll: unhandled POLLERR/HUP/NVAL for fd 28(16) job Components.Task.Job name=EPG Cache Check #tasks=2 completed with [] in None [EPGC] Refreshing EPGCache. [EPGC] /etc/enigma2/epg.dat not found, try /epg.dat [SEC] setVoltage 0 [SEC] setFrontend 1 setting frontend 0 (0)fe event: status 0, inversion off, m_tuning 1 job Components.Task.Job name=EPG Cache Check #tasks=2 completed with [] in None (0)fe event: status 1f, inversion off, m_tuning 2 OURSTATE: ok [eDVBLocalTimerHandler] channel 0x2682040 running [eEPGCache] channel 0x2682040 running [EPGC] next update in 2 sec stop release channel timer ok ... now we start!! eventNewProgramInfo 0 0 have 0 video stream(s), and 0 audio stream(s), and the pcr pid is 1fff, and the text pid is ffffffff allocate demux TuxTxt cache cleared PES filter: DMX_SET_PES_FILTER - Invalid argument
gar wrote: » Hi, i have had openatv running the last few months and had a bit of a mess up with the channels when I 'sorted' them with dreamboxedit. Anyway cut a long story short I loaded up Champs openatv image and restored my channels. All good. Have run crossepg but it is just running and running (icon spinning in the top left). Have hard drive mounted and crossepg folder seems to be getting populated on it. I also removed tsmedia and xbmcaddons as not using them at the moment Flash memory only showing up as 20M free Thoughts? Gar
cyndale wrote: » Is doing a factory reset a good idea if you want to clear out all the 'junk' and to start fresh again?
