Anchises wrote: » No joy starting the plugin. I have 12 plugins listed. The e2upgrade is listed as 'plugin_e2plugin.s' - Is that the correct one ? Does not match the pic as in Pog's tutorial. Should I be able to get the plugin indicator to show green at this stage , with no USB stick in. My understanding is that I am simply enabling the plugin, so that when I insert the image files USB and reboot it will look in the USB stick and upgrade. BTW: I skipped the stage of downgrading to the older version of Spark (1.2.151 ?) , since it was suggested somewhere in this listing that it was not necessary to do that and it's no longer available on Spark's site. A.
Anchises wrote: » No joy starting the plugin. Does not match the pic as in Pog's tutorial.
Plug in the usb where you have 2 files in an enigma2 folder, you'll see an icon notification that the key is mounted. Open plugins, navigate to the e2upgrade plugin and press ok until it goes green, then press red to activate the plugin. It will show a path, press ok and navigate into the folder where you have the two files and press red. Then press red to update
first thing to do is format a USB stick to fat32 and place the 2 enigma2 files on the usb. Not in any folders but on the root of the usb. Insert that into the rear usb port, go to that plugin and press ok, it should bring up a screen with a file path to c drive on it. Then all you need to do is press red.
Anchises wrote: » @ same ol sh1te: I've done that but at this point 'and press ok until it goes green' , it flashes a dialog box saying starting plugin ,please wait, and the item does not go green. There are now two plugins that will not start for me : plugin_e2plugin.s plugin_installer.s A.
elvis23 wrote: » I had to revert to a back and now cant seem to get the left/right buttons to show epg data for what on the other channels. It always just changes the channel (same as up/down buttons). I've set it correctly in the PKT KeyMapper (even loaded the 1.8 Additional version to see if it would help). I know I had this before but cant remember how I changed it? Was there an updated keymapper xml or something? Anyone know off-hand? Thanks
Fresh Pots wrote: » Have you virtual zap plugin activated?
Anchises wrote: » Before switching over to Enigma, I need to get Sattelites.xml sorted. Pog's file is throwing a 404. The site where I can create my own is available, but I'm unsure what to do with this. Will it overwrite the existing file - surely will, and will I lose refs to all other sats ? But I have a sat motor and want to hold the option of using other sattelites too. Presumably, I could get 28.2 now and add to it later or overwrite it ? A.
lensman wrote: » I've been using the SAB Triplx for awhile now & very happy with it, however I notice that one in awhile it slows down when changing channels & browsing through the egp,, powering off & on sorts this out but after a week/10 days it starts to slow down again, any ideas?
It sits in /etc/tuxbox Back up your own first. Ensure permissions are 755 on it also.
Anchises wrote: » I'm afraid I've been counting my chickens before they're hatched When I reboot and select Enigma2 from the front panel it stops at 00:00 Boot and the clock counts up but no boot. How long should I wait ? Think I've got a problem with the Enigma2 install. How common is it that it will start /install/finish and still be in trouble ? I'll try reinstalling E2 again. What image is preferred here ? A.
lensman wrote: » SAB is the same box as the Amiko & Golden media, it's not an epg issue, the box just slows down sometimes & needs a restart to sort it out, might be a cache problem & powering off seems to clear it but I'm open to correction, wonder if it's possible to clear the cache from the menu instead of powering the box off.
same ol sh1te wrote: » Do you have the cacheclear plugin installed? I think most of the images posted here have it
Anchises wrote: » I formatted a hard drive (Seagate GoFlex 250Gig) to Ext3 using GParted. I copied on Hyperions image from Dropbox and inserted in the back USB port. And I ran the E2upgrade from the plugin. It reported success. I rebooted. I copied Sattelites.xml (for 28.2) to /etc/enigma2 using Filezilla - logging on as 'root' and 'tkteam' . Rebooted ..... Looked good : 'Triplex' + scrolling text..... Load (and then a counter - to 99 ? ) Finally...after that it said starting BBC one HD ............ Silence ! and a black screen ............ Unresponsive ............ (Getting a little cross with this little box !):mad::mad: Where to now ? Could it be that it's set for 1080p ? My sony does 1080i no problem. If it was simply the HDMI resolution, I'd still hear audio ? and have control ? Would I ? A.
Anchises wrote: » It was 'givecredits' image from: [URL="Hyperion 4 for Amiko Alien 2- https://www.dropbox.com/s/ii79zf8xt2...back_of_e2.[/URL] Rebooting gives me the same situation....stuck on BBC one HD on display, black screen on TV , no response from remote or STB keys. A.
championc wrote: » Hey all, I've just made an OpenATV 4.2 version of my Image. It's in a folder in my OpenATV link below. This image is working with the following plugins:- AutoTimer, AutoVolumeAdjustment, AutoBoquets, CrossEPG, CoolTVGuide, Various Skins, all Picons, Time from NTP, OSCam (blank with sample lines), automounting your HDD, Streaming, SambaServer, RTEPlayer, OnDemand and finally Permanent Timeshift (turned off). You can obviously install any other plugins you choose. Please use this thread for asking any questions or seeking assistance. Don't forget to download the Readme file too for full details like FTP and Telnet logon details and more other stuff. And Don't forget to click the Thanks button below
Fresh Pots wrote: » Would you mind checking if rte player is working in the ondemand plugin on yours? If it is I'll load yours up. If not I'll stick with what I've got setup. TIA
championc wrote: » Yes, it's working perfectly. I just tried tonights Fairly Sh1tty
