Technofobe wrote: » Quote: ZardozCBBC has changed frequency New frequency is 10773.00MHz, pol.H ,DVB-S, SR:22000 FEC:5/6. CBBC HD is 11464 , pol.H ,DVB-S, SR:22000 FEC:5/6. Cbbc hd and cbbc gone again is it just me changed freq last month as per zardoz post an all worked fine until yesterday now says service not found in pat they couldn't possibly have changed freq again could they what would be the point in that anyone know where they are now thanks
Fresh Pots wrote: » Have you autobouquets set to run nightly?
Gerry Wicklow wrote: » CBBC HD moved temporarily to allow for the commonwealth games. It has now returned to it's original TP 10.847 V, 23.000, 2/3
Technofobe wrote: » tried installing autoboquets last month but the version i downloaded would not install said it was missing dependencies even though this was supposed to be standalone version for Hyperion 4 on amiko alien
RobTheLad wrote: » Hi guys Just got my new Amiko Alien 2+ Box today. ChampionC, I'm going to use one of your images, but confused as to which one to use, OpenAR-P AA2/7162 or OpenATV AA2/7162?
how.gareth wrote: » lads im not sure if this is the right thread to be asking this but is anyone using IPTV and if so can anyone tell me how to get it running, i have a file i need to install on my box, just wondering how i get it to the box, apologies in advance if this is wrong thread/banable subject! i have googled it and am even more confused now, thanks, nigel. ps, i was told to put the file in /etc/enigma2 ??
Fresh Pots wrote: » OpenAR-P would be far more stable than openatv as that's still in beta.
Technofobe wrote: » Thanks for the link I installed autoboquets and it appears to work goes of and does a scan takes 51 seconds When finished it reloads the channell list What I did have before autoboquets was only 1 boquet with all my channels RTE 1 was number 1 on the remote RTE 2 2 and so on After auto boquets all my channells appear renumbered RTE 1 becomes 1930 and so on and number 1 on the remote does nothing anymore If I were to edit these channels in dreambox edit and put them back where I want them will the next autoboquets scan change them around again I did think autoboquets did not touch the favorites
Technofobe wrote: » Thanks guys A bit of tinkering may be in order when She is gone out :-)
Technofobe wrote: » What image are you using Hyperion 'Spark ' Open ATV also what type of file have you downloaded is it .ipk .sh Pretty sure IPTV is not a taboo subject here A few images out there come pre installed with TSmedia which has built in IPTV
how.gareth wrote: » Cheers it's an iptv.sh file, I'm running champs arp, any idea how I get the file to me box?
Fresh Pots wrote: » Can you give me a link to where your getting it? A .sh file is not a plugin, only part of one maybe.@robthelad Are all your saorview channels working on ARP? That's the only problem some user's experienced with ARP? Only one mux would work at a time, but only some users experienced this. Other than that it's a rock solid image.
Fresh Pots wrote: » Can you give me a link to where your getting it? A .sh file is not a plugin, only part of one maybe. hi i got it sent by email with these instructions, sorry for being completely clueless as usual, is this to install IPTV on my box? Place the attached file in /etc/enigma2 folder on your box then with dcc or telnet or ssh login to your box and type sh /etc/enigma2/iptv.sh Your new bouquet file will install automatically and will auto update after every reboot
Fresh Pots wrote: » AB won't touch the favourites third from the bottom. With some script tinkering you can set the favourites bouquet to appear up the top but I'm not sure how.
Slevster wrote: » Hi Technofobe, as FreshPots mentioned, you can use Dreambox edit to drag / reorder bouquets or use the "move bouquet" option in H4 (press "OK" or "fav" button, then menu)
Technofobe wrote: » Thanks for the reply If I change the channell order and say put RTE 1 back on channell 1 and so on will it stay there next time autoboquets updates or will it revert to the order autoboquets thinks it should be like it changed it to channell 1930 when I installed it Sorry to keep harping back to this but for as long as I can remember we have always had RTE 1 as channell 1 RTE 2 as 2 and so on :-)
how.gareth wrote: » Fresh Pots wrote: » Can you give me a link to where your getting it? A .sh file is not a plugin, only part of one maybe. hi i got it sent by email with these instructions, sorry for being completely clueless as usual, is this to install IPTV on my box? Place the attached file in /etc/enigma2 folder on your box then with dcc or telnet or ssh login to your box and type sh /etc/enigma2/iptv.sh Your new bouquet file will install automatically and will auto update after every reboot Download dreambox control center ( DCC ) assign a fixed IP address to you box Setup DCC with the root password for your box Then within DCC press the ftp tab & you will see see 1 large window split in two The right hand side is your pc the left hand side is the amiko Alien browse to the folder etc then inside that open the folder enigma 2 in your left hand side browse to the file you downloaded in your right hand side highlight the .sh file then press the arrow in the centre of the screen pointing to the left to move the file Once its moved hit the telnet tab and type the command in the instructions sh /etc/enigma2/iptv.sh and press return
same ol sh1te wrote: » Yes,but it will not edit it if you have it in a favourites bouquet down the bottom. There is a way to customise autobouquets, read the readme in the folder
Technofobe wrote: » how.gareth wrote: » Download dreambox control center ( DCC ) assign a fixed IP address to you box Setup DCC with the root password for your box Then within DCC press the ftp tab & you will see see 1 large window split in two The right hand side is your pc the left hand side is the amiko Alien browse to the folder etc then inside that open the folder enigma 2 in your left hand side browse to the file you downloaded in your right hand side highlight the .sh file then press the arrow in the centre of the screen pointing to the left to move the file Once its moved hit the telnet tab and type the command in the instructions sh /etc/enigma2/iptv.sh and press return thanks, i have dcc installed and running and ftp and telnet connected, boot manger not found, i have searched through the pc files on the right hand side pane but cannot see the file i downloaded anywhere? left hand side pane is empty
how.gareth wrote: » Download dreambox control center ( DCC ) assign a fixed IP address to you box Setup DCC with the root password for your box Then within DCC press the ftp tab & you will see see 1 large window split in two The right hand side is your pc the left hand side is the amiko Alien browse to the folder etc then inside that open the folder enigma 2 in your left hand side browse to the file you downloaded in your right hand side highlight the .sh file then press the arrow in the centre of the screen pointing to the left to move the file Once its moved hit the telnet tab and type the command in the instructions sh /etc/enigma2/iptv.sh and press return
how.gareth wrote: » Technofobe wrote: » thanks, i have dcc installed and running and ftp and telnet connected, boot manger not found, i have searched through the pc files on the right hand side pane but cannot see the file i downloaded anywhere? left hand side pane is empty when you connect with DCC do you get a green line all the way across ?
Technofobe wrote: » thanks, i have dcc installed and running and ftp and telnet connected, boot manger not found, i have searched through the pc files on the right hand side pane but cannot see the file i downloaded anywhere? left hand side pane is empty
Technofobe wrote: » how.gareth wrote: » when you connect with DCC do you get a green line all the way across ? yep green line from pc to receiver to router, if i click on ftp protocol it says login with user and pass, i have user-root password-blank.
how.gareth wrote: » when you connect with DCC do you get a green line all the way across ?
